Forgot your Wi-Fi password or need to reconfigure your network, but don’t know how to open the Xiaomi router control panel? This guide will help even if you have never visited the router’s web interface before. We will look at all the current models, from the budget Mi Router 4A and 4C to the flagship AX6000 and BE7000, and also analyze typical errors like “page does not open” or “incorrect login”.
The process of entering the settings of the Xiaomi router takes no more 2-3 minutes, if you know the right thing. IP-address and standard credentials, but the manufacturer updates the firmware periodically, so 2026 In this article, only current methods tested on the latest versions of MiWiFi software (including: 3.6.125 newer).
1.Preparation: What to know before entering
Before you go to the router page, make sure that three key conditions are met:
- 🔌 The router is on and the power indicator is blue (green/orange means error).
- 📶 Your device (PC, smartphone, tablet) is connected to the network of this router – via Wi-Fi or cable.
- 🌐 Used modern browser: Chrome, Edge, Firefox or Safari (IE unsupported!).
If the Xiaomi router is new and has never been configured, you will need a standard login and password.
- 🔑 Login: admin
- 🔑 Password: Admin or field left blank (depending on firmware version).
💡
On Xiaomi AX3600 and later, the system may require you to create a new password when you first log in. Use a combination of 8+ characters with numbers and letters.
If you've changed your credentials before and you've forgotten them, you're going to have to reset your router to the factory, and that's in the relevant section.
2.The main method: entrance through IP-address 192.168.31.1
Standard. IP-The address for all Xiaomi routers is 192.168.31.1, which is the main door to the web interface:
- Connect to the router network (via Wi-Fi or cable).
- Open the browser and enter in the address bar: http://192.168.31.1
- Press Enter. The login page should appear.
- Enter the login and password (by default — admin/admin).
Connection to the router network|Browser updated|Disabled. VPN/proxy|Antivirus does not block access-->
If the page does not open, check:
- ❌ Misprints in the address (for example, 192.168.1.1 is the address of routers TP-Link!).
- ❌ Connecting to another network (such as a neighbor or mobile internet).
- ❌ Windows or macOS firewall (temporary disable it).
3. Alternative addresses for entry
If 192.168.31.1 doesn’t work, try Xiaomi’s other official addresses:
| Address | For which models? | When to use |
|---|---|---|
| miwifi.com | All models (except the oldest ones) | If IP-The address is not opened, but the router is connected to the Internet. |
| 192.168.0.1 | Mi Router 3/3C/3G | Only for outdated firmware (until 2019) |
| router.xiaomi.com | AX6000, BE7000, new firmware | If the Smart Home function is enabled |
Important: the address miwifi.com works only when you are actively connected to the Internet through the Internet WAN-router port. If you don't have internet, use it. IP-address.
You can also try to automatically determine the router address:
- 🪟 On Windows: Open the Command Prompt and type: ipconfig | findstr "Main Gateway" The address you are looking for will be in the "Main Gateway" line».
- 🍎 Nana macOS/Linux: In the terminal, perform: netstat -rn | grep default
4. Entry through the Mi Wi-Fi app (for smartphones)
If you are setting up a router from a smartphone, it is more convenient to use the official Mi Wi-Fi app (available for Android and iOS), which is true for models with Mi Home support (AX3600, AX6000, BE7000 and later).
Instructions:
- Download the app from Google Play or the App Store.
- Connect to the router network.
- Open the app and click “Add Device” → “Router”.
- Follow the instructions on the screen (may need to be scanned) QR-router-code).
What to do if the application does not find the router?
The application is convenient for:
- 📱 Quick setup of the guest network.
- 🔄 One-click firmware updates.
- 📊 Viewing Connected Devices and Traffic.
⚠️ Note: Mi Wi-Fi does not have all the features of the web interface. VLAN or DDNS — You still need to go through the browser.
5. Problem Solving: The page does not open
If you see errors like “Website is unavailable” or “Unable to connect” when you try to log in, check the following points:
| Mistake. | Possible cause | Decision |
|---|---|---|
| ERR_CONNECTION_TIMED_OUT | Router doesn't respond. | Restart the router (take out the plug for 30 seconds) or check the power cable |
| ERR_NAME_NOT_RESOLVED | Wrong address. | Use 192.168.31.1 instead of a domain name |
| 404 Not Found | Outdated firmware | Update the software through the Mi Wi-Fi app |
| Incorrect login/password | Data modified | Reset the settings (see section below) |
Additional steps for diagnosis:
- Try connecting to the router via cable (will eliminate problems with Wi-Fi).
- Disable VPN, proxy, or antivirus programs (they may block access).
- Check if the Internet indicator on the router is on (if not, the problem is on the provider’s side).
💡
If the Xiaomi router is connected to another router in “repiter” mode, its web interface may not be available, in which case, configure it through the main router.
6. Reset settings if you forget your password
If you lose your login data, the only way to get back access is to reset to factory settings. This erases all personal data (wi-fi name, passwords, firewall rules), so use the method only as a last resort.
Instructions:
- Find the Reset button on the back of the router (usually deepened into the case).
- Take a paperclip or toothpick and press the button, holding it for 10-15 seconds.
- Release the button when the indicators start flashing yellow.
- Wait for the restart (1-2 minutes), and then the router will be like new.
After discharge:
- 🔄 Wi-Fi settings will reset to standard (Xiaomi_XXXX).
- 🔑 The login and password for the entrance will become admin/admin.
- ⚠️ All connected devices will be disconnected from the network.
⚠️ Attention: on Xiaomi routers AX6000 and BE7000 After the reset, you may need to re-assign to your Mi Account via the app, without which some of the features (such as parental controls) will not be available.
7.Setting up after the first entry
When you successfully logged in to the web interface, we recommend immediately:
- 🔐 Change the administrator password (System section) → Management).
- 📡 Reconfigure Wi-Fi (network name and password in Wireless mode) → Wi-Fi settings).
- 🛡️ Update the firmware (if a new version is available in the System) → Update).
- 🔄 Restart the router to apply changes.
In modern firmware MiWiFi interface is divided into tabs:
- Status – information about the connection and devices.
- Internet - WAN settings (PPPoE, static IP).
- Wireless mode – Wi-Fi management (2.4 GHz and 5 GHz).
- Additionally, firewall, DMZ, port forwarding.
💡
On models with Mesh support (for example, Xiaomi AX3000T) after entering the settings, check the section “Mesh Network” – there you can combine several routers into one network without losing speed.
8.Security: How to Protect Access to a Router
After setting up, do not forget about security:
- 🔒 Use a complex password to log in (at least 12 characters with numbers and special signs).
- 🚫 Disable Remote Control in Settings (System section) → Remote access, if you do not use it.
- 🔄 Regularly update the firmware (new versions close vulnerabilities).
- 📋 Include an Event Log to track entry attempts.
For models with Mi Home support (AX6000, BE7000):
- 🔗 Link the router to your Xiaomi account – this will allow you to restore access even after a reset.
- 🛡️ Enable DDoS Protection in the Security section.
⚠️ Note: If you sell or transfer a router to another person, be sure to reset your settings and untie it from your Mi Account.