How do you put it in? SIM-Map in Xiaomi Mi 6: instructions with photos and tips for setting up

Introduction: Why the Right Installation SIM-The Mi 6 is so important.

The Xiaomi Mi 6, released in 2017, is still in demand among users thanks to its powerful hardware and up-to-date firmware, but even such a time-tested device has nuances, such as the non-standard location of the tray for the device. SIM-Installation errors can cause network problems, damage to contacts, or even break the extraction mechanism.

In this article, we will discuss the step-by-step installation process. SIM-Mi 6 cards, including choosing the right format (nano-SIM), working with Dual SIM-It's a configuration and a solution to common errors, and we'll focus on the difference between the Chinese and the global versions of the smartphone, which is critical for the proper operation of mobile communications.

If you’ve just purchased a used device or are first encountering Xiaomi, the manual will help you avoid common problems such as “can’t see SIM” or “no network” after installation.

What SIM-cards supports Xiaomi Mi 6: formats and limitations

Xiaomi Mi 6 is equipped with a hybrid tray that supports:

• 📱 Two nano-SIM cards (format) 4FF, 12.3×8.8×0.67 mm - only in the version with Dual SIM (Like Mi. 6 6/64GB Dual).
• 💾 One nano-SIM + microSD (up to 128 GB) – in hybrid models, where the second slot is combined with a memory card.
• ⚠️ Only one nano-SIM in some regional versions (e.g. Europe).

Mi 6 does not support micro-SIM or standard SIM-If you have a card of a different format, you will have to cut it or replace it in the operator’s cabin, and also note that Chinese versions (for example, with firmware for the Chinese market) may not recognize it. SIM-cards of some foreign operators without additional settings.

💡

Before buying the Xiaomi Mi 6, check its IMEI version at IMEI.info to determine if the device supports Dual SIM or only one card.

If you are planning to use two SIM-Make sure your model supports Dual. SIM Dual Standby (DSDS). Otherwise, the second slot can only work with a memory card.

Where is the tray for SIM-card in Xiaomi Mi 6: photo and description

Unlike many modern smartphones, where the tray is located on the upper or side edge, in the Xiaomi Mi 6 it is hidden on the left end of the case (when you look at the screen), this is an unobvious solution often causes difficulties for new owners.

The tray is visually a small hole with a metal rim, next to which there are no inscriptions or signs.

1. Take your smartphone in your right hand with the screen.
2. Swipe your finger on the left edge - you will feel a slight depression.
3. Hold the device to the light: a metal mechanism should be visible in the hole.

The photo below shows the exact location (marked with a red circle):

⚠️ Note: Do not confuse the tray for SIM-cards with a microphone hole, which is located on the bottom face of the Mi 6.Attempting to insert the ejector tool there may damage the device’s internal components.

Step-by-step instruction: how to insert SIM-map in Xiaomi Mi 6

For installation SIM-You'll need a card:

• 🔧 Paperclip or special key (comprised with phone).
• 📱 Nano-SIM card (or two if dual-based) SIM).
• 🔍 Good lighting - the tray is small, and you will have to work carefully.

Follow the algorithm further:

1. Turn off your smartphone. This is not necessary, but it is recommended to avoid failures in card recognition.
2. Put the paper clip in the tray hole all the way to the top, and you hear a slight click, and the tray will move out a little bit.
3. Carefully pull the tray with your fingers - do not pull the clip so as not to bend the mechanism!
4. Put it down. SIM-card(s: 🔹 For one. SIM: Place it in the first slot (usually marked as SIM1). 🔹 For Dual. SIM: Put the second card in the second slot (SIM2), oriented (skos to the body).

Put the tray back in.

Turn on the phone.

Make sure that SIM-map is trimmed to nano-format|Check that the card contacts are not scratched|Use the original paperclip from the set|Do not make excessive efforts when removing the tray-->

After switching on the smartphone does not see SIM-map, try it:

• 🔄 Reset the device.
• 🔧 Carefully remove and insert the tray again (maybe the map has shifted).
• 📶 Manually select the operator in the settings: Settings → SIM-maps and mobile networks → Choice of network.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes face problems with installation. SIM-Xiaomi Mi 6 cards: Here are the most common mistakes and ways to solve them:

⚠️ Attention: If after installation SIM-The smartphone says “No service” or «SIM-The card is not supported, which may indicate incompatibility with the operator (especially in the Chinese versions). MIUI or use a patch to modify IMEI (requires unlocking the loader).

Another typical situation is that users try to insert a microSD into a slot for a second SIM, not realizing that in their Mi 6 version, the hybrid tray only works with a memory card. To avoid confusion, specify the configuration of your device by model or IMEI in advance.

How to set up SIM-Maps after installation: priorities, Internet, calls

After successful installation SIM-You need to set it up correctly, especially if you're using two cards. In Xiaomi Mi 6, this is done through the Settings menu. → SIM-maps and mobile networks.

The main parameters that should be set up:

• 📞 Priority SIM for calls: Select which card will be used by default for outbound calls.
• 🌐 Mobile data: indicate which SIM The Internet will work (important for Dual). SIM).
• 📩 SMS by default: select SIM message-post.
• 🔄 Switching data: Turn on the option if you want to automatically switch to the second SIM If there is no network in the first.

To set up the Internet:

1. Go to Settings. → SIM-maps and mobile networks → [choose SIM] → Access points (APN).
2. If your carrier’s APN is not automatically loaded, add it manually (options can be found on the operator’s website).
3. Save the settings and restart the phone.

If you have a Chinese version of the Mi 6, you may need to manually prescribe your network settings, as the firmware may not support automatic configuration for overseas carriers.

💡

Always check the balance on both. SIM-maps after setting up - in Dual SIM-Smartphone can “forget” the main card for outgoing calls.

What to do if the tray jammed or broken the extraction mechanism

One of the most unpleasant situations is when the tray is SIM-The card is not retrieved after you press it, and the causes can range from dust to mechanical damage:

If the tray is not extended:

• 🔧 Try using a stiffer tool (e.g., an unbended stationery brace instead of a standard paper clip).
• 💡 Light a flashlight into the hole - it is possible that the mechanism has shifted and requires more accurate pressing.
• 🔊 Put your ear to the hole and press the paper clip: if you hear a click but the tray does not come out, gently pull it with tweezers.

If the tray fell or bent:

• ⚠️ Don’t try to put it back in by force – it can damage your contacts.
• 🛠️ Carefully align the tray on a flat surface (you can use a credit card as a guide).
• 📞 If the mechanism is broken, contact the service center - self-repair can lead to dust entering the body.

⚠️ Attention: If the tray is jammed after the phone falls, do not use pliers or other rough tools. In the Xiaomi Mi 6, the tray is connected to a thin mechanism that is easily damaged.

In extreme cases, you can try to extract the tray using a vacuum pump (as for screens) or a thin plastic card, but this is risky - there is a great chance to scratch the case.

FAQ: Answers to Frequent Questions about SIM-maps in Xiaomi Mi 6