Replacement of the screen Xiaomi Mi 9T Pro: prices 2026, where cheaper and what to look for

Why Xiaomi Mi 9T Pro Screen Breaks and When to Replace

Xiaomi Mi screen 9T Pro is one of the most vulnerable spots in the smartphone, despite the protection of Gorilla Glass 5. Falling from the height of everything 1-1.5 meter on a solid surface in 80% In some cases, it leads to cracks, and a blow to the corner often disables not only the glass, but also the glass. AMOLED-Even if the display remains visually intact, after falling, the image artifacts (bands, flickering, broken pixels) may appear or the sensor will not respond to touch, in which case the replacement of the screen becomes inevitable.

Owners of Mi 9T Pro also face software-based display failures: spontaneous flickering at low brightness, “ghost” touches, or complete image loss after a firmware update. Here, the problem may lie in the plume or the screen controller, so that the diagnostics will show whether a new module is needed or if the contacts are soldered enough. It's important to distinguish mechanical damage from factory defects: if the screen went in waves without hitting, it can be a defect. AMOLED-panels covered by the warranty (provided that the phone is not dropped or disassembled).

Average screen life of Mi 9T Pro with careful use — 3-4 But the heavy operation (frequent falls, moisture, overheating) cuts that period by half, and if you notice that the sensor is less responsive to touching edges or there are yellow spots at the bottom of the screen, these are signs of wear and tear. OLED-The new system will need replacement soon.

How much does it cost to replace the screen Xiaomi Mi 9T Pro in 2026: a comparison of prices

The cost of replacing the screen depends on three key factors: the type of module (original, copy, restored), the region of repair (Moscow, regions, online order) and the status of the service center (official, partner, private workshop). In 2026, the price of the service varies from 3,500 to 12 000 rubles, and the difference is due not only to the quality of the parts, but also to the complexity of the work.

Official service centers Xiaomi in Russia offer a replacement screen Mi 9T Pro at a fixed price — from 8 900 to 11 500 rubles (including work and the original module). However, there is a nuance: if the phone is warranty, but the screen crashed due to the user, repair will be paid, but the part will be put factory. In informal workshops the same original screen will cost 7 500-9 000 rubles, and a copy of high quality — from 4 000 to 6 500 rubles. The cheapest options (3 500-4 500 500 500 rubles) usually involve the installation of restored or low-quality Chinese modules that will last for no more than a year.

It is important to note that the price often does not include replacing the camera's protective glass (if it is also broken), diagnosing additional damage (for example, a plume or battery) and adjusting the sensor after installation. Some workshops charge a separate fee for color calibration (relevant to non-original screens where shade shift is possible).

Prices are job-specific, and if you buy a screen separately (e.g., on AliExpress or in Russian parts stores), it will cost 50-70% of the final price, but replacing it yourself can carry risks ranging from damage to the plume to the motherboard.

Original vs copy: what to choose for the Mi 9T Pro and what is the catch

The main difference between the original screen Xiaomi Mi 9T Pro from copy - quality AMOLED-The original modules are factory calibrated so they don't have a color shift (e.g., green or blue on a white background), and the brightness and contrast correspond to the declared 600 nits and 100,000:1. Copies, even premium ones, often sin:

• 🔹 Uneven backlighting – there may be dark spots or clouds on the edges of the screen".
• 🔹 Displaced colors - white gives in blue or yellow, and black looks gray.
• 🔹 Poor sensor sensitivity – you have to press harder, especially at the corners.
• 🔹 Rapid wear – after 6-12 months, broken pixels or flickering may appear.

But the original screens also have downsides: they are 2-3 times more expensive and hard to find in small towns, and if budgets are tight, you can consider premium copies from trusted manufacturers (e.g. BOE or Tianma) that use the same factories as Xiaomi, but with simplified calibration, which will last 2-3 years without serious problems.

Special attention should be paid to refurbished screens, which are sold as "almost original", but in fact they are modules removed from broken phones and repaired (for example, replaced glass or plume), the risks are high:

• 🚨 Hidden defects – cracks under the polar filter that will appear in a month.
• 🚨 Sensor problems – “dead zones” or double touches.
• 🚨 Lack of warranty – most workshops refuse to give a warranty on such screens.

💡

Before buying a copy of the screen, ask the wizard to show it in the test phone. Pay attention to the uniformity of the backlight (include a white background at maximum brightness) and check the sensor with a special test (for example, the Touch Screen Test application).

Replacing the screen: is it worth the risk?

Replacing the Xiaomi Mi 9T Pro screen at home is possible, but requires electronics experience, specialized tools and patience. The Internet is full of video instructions, where the process looks simple: unscrewed screws, disconnected plumes, put a new screen.

• 🔧 Fragile plumes – with careless removal, you can break the contacts of the battery or camera.
• 🔧 Adhesive tape – the screen is glued to bilateral tape, which is difficult to remove without residues.
• 🔧 Touch calibration – after replacement, firmware may be required for the correct operation of the touch screen.

If you are planning to do a self-repair, here is the minimum set of tools you will need:

Set of screwdrivers (cross, flat, flat, T3–T5)|Plastic blades for disassembly|Hair dryer or glue heating station|Screen suction cup|Tweezers and antistatic bracelet|New screen with glue tape|Isopropyl alcohol for cleaning-->

The cost of tools will cost 1,500-3,000 rubles, and the screen itself (copy) - from 3,000 to 5,000 rubles. Totally it will be cheaper than in the service, but the risks are high:

⚠️ Warning: If the battery plume is not properly disconnected, the phone may swell or catch fire. NFC (located under the battery) or Wi-Fi antenna, which will lead to additional costs.

If you've never taken a smartphone apart, it's best not to experiment. Mi 9T Pro screen replacement errors often lead to:

• 💥 Short circuit (if you forget to turn off the battery).
• 📵 Network loss (damage to antenna contacts).
• 🔋 Fast discharge (incorrect connection of the battery plume).

Where to replace the screen: TOP-5 tested

Choosing a workshop is half the success. Xiaomi's official service centers guarantee quality, but their prices are overpriced and the queue can stretch for a week. Private workshops are cheaper, but there is a high risk of running into unscrupulous artists. We analyzed user reviews and compiled a rating of reliable options for replacing the Mi 9T Pro screen:

1. Official Xiaomi Service Center ✅ Pros: original parts, 12 months warranty, free diagnostics. ❌ Cons: high price (from 9000) ₽), long wait (3-7 days).
2. Fix Price Workshop Network" ✅ Pros: fixed prices (from 6,500) ₽ For the original, 6 months warranty, work throughout Russia. ❌ Cons: not always have original screens available.
3. Local workshops with good reviews ✅ Pros: Price from 5,000 ₽, Quick repairs (1-2 days), individual approach. ❌ Cons: the risk of running into poor-quality parts (check reviews!).
4. Self-ordering screen + workshop ✅ Pros: you can save money (screen on AliExpress - from 3,500) ₽, work - 1,500-2,000 ₽). ❌ Cons: no guarantee for the part, there may be problems with compatibility.
5. Russian Post / courier delivery to the service ✅ Pros: you do not need to go to another city (relevant for small settlements). ❌ Cons: risk of damage during transportation, long term (up to 2 weeks).

Before choosing a workshop, it is necessary to:

1. Check the reviews on Yandex.Maps or 2GIS (pay attention to the fresh ones, for the last 3 months).
2. Check if you have a warranty for work and spare parts (documentary!).
3. Ask if you have a free diagnosis (some places charge 500-1000 for it). ₽).
4. See if the wizard has experience with Xiaomi (some specialize only in iPhones).

⚠️ Warning: Avoid workshops that refuse to show screens before installation or ask for "diagnosis" before work begins.

What to do after changing the screen: setting up and testing

Even if the replacement is successful, the new Xiaomi Mi 9T Pro screen may not behave properly, such as the sensor will “float” or the colors will seem too cold.

1. Check the sensor Install the Touch Screen Test and take the responsiveness test. If there are dead zones or double touches, ask the wizard to reconnect the plume.
2. Set up color rendering Go to Settings → Display → Color mode and select “Standard” (for original screens) or “Saturated” (if the colors are pale).
3. Sometimes, after changing the screen, you need to flash the drivers correctly. Download the latest version of MIUI for Mi 9T Pro from the official website.
4. If the phone is in the rain or was in a wet environment, after changing the screen, you may need to replace the sealing tape (costs 200-300). ₽).

In the first days after the repair, watch out for:

• 🔋 Battery consumption – if the phone began to discharge faster, the battery plume may have been damaged.
• 📶 Quality of communication - if lost 4G Wi-Fi, check the antenna contacts.
• 🌡️ Overheating – the new screen should not be warmer than the old one (maximum) +5°C).

If you notice problems, return to the workshop within a warranty period (usually 7-30 days for work), many defects do not appear immediately, but after 2-3 days of operation.

💡

After changing the screen, avoid installing heavy games or multitasking in the first 24 hours to help avoid overheating and check the stability of the new module.

Frequent questions about changing the screen Xiaomi Mi 9T Pro