A broken screen on a Xiaomi smartphone is one of the most common breakdowns that owners face, and even a small crack can eventually lead to sensor failure, image flickering, or complete display failure, but how much it costs to replace the screen depends on many factors: the phone model, the type of matrix, the originality of the part, and even the region of repair.
In this article, we will analyze the current prices for replacement displays for popular Xiaomi models (from budget Redmi to flagship Mi and other models). POCO), We'll compare the cost of a service and a private workshop, and we'll tell you how to distinguish the original screen from a fake, and you'll learn when repairs are not cost effective, and when you can save money by replacing them yourself.
Important: prices in the article are current for 2026 and can vary depending on the exchange rate, availability of spare parts and the policies of service centers.
What the cost of replacing the screen Xiaomi
The price of a replacement display can vary by 2-3 times even for the same model, and here are the key factors that affect the total amount:
- 📱 Smartphone model: flagship devices (e.g. Xiaomi 14 or Xiaomi) POCO F6 Pros will be more expensive due to the use of premium matrices (AMOLED, LTPO). Budget Redmis are cheaper, but the screen quality is lower.
- 🔧 Type of matrix: IPS-displays are cheaper AMOLED, a) screens with high refresh rate (120/144 Hz) - more expensive than standard 60 Hz.
- 🔍 Originality of the spare part: official screens from Xiaomi are 1.5-2 times more expensive than their counterparts, but they guarantee full compatibility and long service life.
- 🏢 Repair site: Authorized service centers offer higher prices, but they are guaranteed. Private workshops can offer cheaper, but the risk of running into poor quality work is higher.
- 🛠️ Disassembly complexity: some models (for example, Xiaomi 13 Ultra) the screen is glued especially firmly, which increases the cost of work.
The price is also affected by the configuration of the repair kit, in some cases, the masters offer to replace only the glass (if the matrix is intact), which is cheaper than a full replacement of the module. AMOLED-The glass and matrix are often a single unit.
⚠️ Warning: If the smartphone stopped turning on after the fall or the screen became completely black, the problem may not be in the display, but in the plume or motherboard, in which case replacing the screen will not solve the problem, and diagnostics will require additional costs.
Comparison of screen replacement prices in service centers and private workshops
To understand where Xiaomi is more profitable to repair, compare the average prices across different types of services, based on an analysis of offers in Moscow, St. Petersburg and the regions of Russia (June 2026).
| Xiaomi model | Official Service Center (with spare parts) | Private workshop (original screen) | Private workshop (analogue) |
|---|---|---|---|
| Redmi Note 12 | 12 000 – 15 000 ₽ | 8 000 – 10 000 ₽ | 4 500 – 6 000 ₽ |
| POCO X5 Pro | 14 000 – 17 000 ₽ | 9 000 – 11 000 ₽ | 5 500 – 7 000 ₽ |
| Xiaomi 13 | 22 000 – 26 000 ₽ | 15 000 – 18 000 ₽ | 10 000 – 12 000 ₽ |
| Xiaomi 13 Ultra | 30 000 – 35 000 ₽ | 20 000 – 24 000 ₽ | 14 000 – 17 000 ₽ |
| Redmi A2 | 7 000 – 9 000 ₽ | 5 000 – 6 500 ₽ | 3 000 – 4 000 ₽ |
As you can see from the table, the difference between a formal service and a private workshop can be as high as 30 to 50 percent, but in authorized centers, you get:
- 🔄 Work and parts warranty (usually 6-12 months).
- 📋 Use only original components.
- 🛡️ Preservation of factory tightness (important for moisture protection).
In private workshops, the risks are higher: unscrupulous craftsmen may install a substandard counterpart that will last only a few months, and after informal repairs, you may lose the factory warranty (if it is still valid).
Original screen vs analogue: what to choose and how not to run into a fake
One of the hardest questions to ask when replacing a display is the choice between the original part and the analogue, so let's look at the pros and cons of each option.
Original Xiaomi screens
Advantages:
- ✅ Full compatibility with hardware and smartphone software.
- ✅ All functions are saved (Always-On Display, adaptive refresh rate, correct operation of sensors).
- ✅ Long service life (warranty from 6 months).
- ✅ Accurate color reproduction and brightness, like the factory screen.
Disadvantages:
- ❌ High price (sometimes up to 50% of the cost of a new smartphone).
- ❌ Long wait (in some services, original parts have to be ordered).
Analogues (OEM and unoriginal)
Advantages:
- ✅ Price 1.5-3 times lower than the original.
- ✅ Quick replacement (parts are usually available).
Disadvantages:
- ❌ Color calibration problems (screens are often too cold or warm).
- ❌ Not all features are supported (for example, Always-On Display may not work).
- ❌ Risk of rapid wear (low-quality analogues fade or lose sensitivity after 6-12 months).
Critical: some unscrupulous workshops pass off cheap counterparts for originals. To avoid cheating, demand a check indicating the type of spare part and a warranty card.
Ask the workshop to provide a spare part package with a hologram Xiaomi|
Compare the screen serial number with the manufacturer's database (if possible)|
Check all functions (Always-On, adaptive brightness, sensor)|
Pay attention to the quality of the assembly (are there gaps, creaks, irregularities)-->
Should I Change the Screen on Myself: Risks and Recommendations
Replacing Xiaomi’s screen at home is possible, but requires experience, special tools and patience. If you have never disassembled smartphones, it is better to trust the professionals – a mistake can lead to a complete failure of the device.
What you will need for a self-replacement:
- 🔧 Set of screwdrivers (cross, flat, torks).
- 🔥 Hair dryer or a station for heating glue (temperature 60-80)°C).
- 🧲 Suction cups and mediators for screen separation.
- 📦 New screen (preferably with a glue frame in the kit).
- 🔌 Multimeter for checking contacts (optional).
Main risks:
- 💥 Damage to plumes or motherboard in careless disassembly.
- 🔋 Battery discharge during operation (may result in short circuit).
- 📉 Loss of leakage (after self-replacement, the smartphone may lose moisture protection).
- 🖥️ Problems with sensor calibration or color rendering.
If you do decide to repair yourself, follow the steps for your model. For example, for the Xiaomi Redmi Note 11, the process looks like this:
- Turn off your smartphone and remove it. SIM-map.
- Heat the screen edge with a hair dryer (don’t overheat!).
- Carefully tuck the screen with the mediator, starting at the bottom edge.
- Disconnect the battery plumes and the display.
- Set a new screen, plug in the plumes and assemble the device in reverse order.
⚠️ Note: When you replace yourself, you automatically lose the warranty (if it is still valid). In addition, without special equipment, it is impossible to check the leakage of the case after assembly - this can lead to moisture and corrosion of the board.
💡
Before disassembling the smartphone, take a picture of the location of all the plumes and screws. This will help avoid errors during the reverse assembly and save time.
When screen repair is not feasible: alternative solutions
Sometimes it's so expensive to replace a display that it's cheaper to buy a new smartphone. Here are the cases where repairs can be unjustified:
- 📉 The replacement cost is more than 50-60% of the price of a new phone (relevant for older models, such as the Redmi 9 or the new phone). POCO X3 NFC).
- 🔧 In addition to the screen damaged other components (motherboard, cameras, battery).
- 📅 The device is more than 3-4 years old, and its performance is not enough for modern tasks.
- 🔋 The battery is worn out (less than 60% capacity) and it will require additional investment.
In such cases, consider alternative options:
- 🔄 Trade-in: many stores (for example, “Svyaznoy” or “M. Video”) accept old smartphones in the account of buying new, even with a broken screen.
- 📱 Buying a used phone: on Avito or Yula you can find Xiaomi workers in good condition at the price of repairing your device.
- 🛠️ Using your phone as a “donor”: If the motherboard is good, you can sell it to repair other devices.
Example: Replacing the screen on Xiaomi Mi 11 will cost 18 000-22,000 ₽, The new Redmi Note 13 Pro+ You can buy it for 25,000 to 30,000. ₽. In this case, the repair of the old flagship is economically unprofitable.
💡
If the smartphone is older than 3 years and its repair costs more than 60% of the cost of a new device, it is more advisable to consider buying a replacement.
How to save on screen replacement: proven ways
If repairs are inevitable but you want to reduce costs, use these tips:
- 🔍 Compare prices in several workshops: even in one city, the difference can be as much as 20 to 30 percent. 2GIS or Yandex.Maps for searching reviews.
- 📅 Wait for the promotions: many service centers offer discounts for repairs in the low season (for example, in winter).
- 🛒 Buy the screen yourself: some workshops agree to install a spare part purchased by the customer (usually only charge for work%.
- 📦 Use used displays: on AliExpress or Avito you can find original screens from disassembled smartphones (risky, but cheap).
- 🤝 Unite with other owners: if you and your friends have broken screens on the same models, you can order parts in bulk and save on delivery.
Beware of too cheap offers, which can be a sign of using poor-quality parts or unskilled craftsmen. POCO F5 costs less than 5,000 ₽, There is a high risk that you will install a low-quality analogue with poor color reproduction.
Where to look for profitable offers:
- 🌍 AliExpress – cheap analogues, but a long wait for delivery.
- 🛒 Beru or Ozon – original parts with warranty.
- 📱 Groups in VKontakte or Telegram for repair of equipment (for example, Repair Xiaomi SPb»).
Frequent screen replacement problems and how to avoid them
Even after professional repairs, there can be problems, and here are the most common ones and ways to prevent them:
- 🎨 Color Rendering incorrect: If the screen is too cold/warm, try calibrating the colors in the settings (Settings) → Display. → If it doesn't help, it's probably a low-quality analogue.
- ☠️ «Sensor dead zones: check the sensitivity of the screen immediately after repair. If part of the display does not respond to touch, demand rework.
- 🔋 Fast battery discharge: after changing the screen, some wizards forget to plug in the battery plume or damage it. → Battery.
- 💧 Moisture: if after repair the smartphone is no longer waterproof, avoid using in wet conditions (for example, in the bathroom).
- 🔊 Speaker or microphone problems: If the assembly is sloppy, the plumes may be clamped. Check the sound immediately after the repair.
To minimize the risks, before paying for the work:
- Ask the wizard to turn on the phone and check all the functions.
- Make sure there are no extraneous squeaks or backlashes when you press the screen.
- Check the Always-On Display (if supported), adaptive brightness, and gestures.
⚠️ Note: If after replacing the screen, the smartphone began to overheat or spontaneously reboot, immediately contact the workshop - this may indicate damage to the motherboard or battery.