How much does it cost to replace the screen Xiaomi Redmi 9C: 2026 prices, where cheaper and how not to pay

Cracked or broken screen on Xiaomi Redmi 9C — One of the most common problems for this budget smartphone is that even a slight drop can cause a spider web to crack, and a big hit can cause a complete sensor failure. 9C" And many people are worried, because the cost of repairs is sometimes the same as the cost of a new device. In this article, we will analyze all options - from official services to self-replacement, compare the prices for original and non-original spare parts, and also tell you how to save without risk for the phone.

The key is not to panic. Even if the display is completely broken, 90% of the time the phone is repairable. However, the cost of repair can vary by 2-3 times depending on the master chosen, the type of screen and the region. For example, in Moscow, replacing will cost more than in a small city, and the original display will cost 30-50% more than the analogue. To avoid overpaying and running into poor-quality repairs, read further - we have collected current prices for 2026 and useful life hacks.

Why the screen on Redmi is breaking 9C: root-leading

Xiaomi Redmi screen 9C It's made of oleophobic glass, but it's still vulnerable to mechanical damage:

• 📱 Falling to a hard surface – even from a height of 50-70 cm (for example, from a table) a crack or chip may appear.
• 💥 Point impact – if the phone hits an angle or edge, the risk of damage to the matrix is higher than if it falls on a flat surface.
• 🔥 Overheating or hypothermia – sudden temperature changes (for example, if you leave your phone in the sun in your car) can cause the sensor to detach.
• 🔧 Poor build after previous repairs – if the screen has already been changed, but used cheap glue or improperly fixed plumes, the new display will last less.

According to statistics of service centers, most often the screen Redmi 9C It breaks down in the first 6 to 12 months of use, and that's because budget smartphone owners use less covers and protective glass, saving on accessories. ₽ It can save you from expensive repairs!

⚠️ Warning: If the screen starts to float after the fall (the image twitches when pressed), this is a sign of damage to the plume, in which case not only the display will need to be replaced, but also the contacts will be repaired, which will increase the cost by 500-1000 ₽.

How much does it cost to replace the screen on Redmi? 9C: price comparison 2026

The cost of repair depends on three key factors:

1. Screen type - original (OEM) or equivalent (aftermarket).
2. Repair site – official Xiaomi service, authorized partner or private workshop.
3. The complexity of the work is whether it is necessary to replace the sensor, glue, frame or only glass.

Below is a table with the current prices for June 2026 (including work and parts):

Important: official Xiaomi services only use original parts, but the price is higher by 20-30% due to the warranty (usually 6 months). Private workshops often save on glue or plumes, so specify what is included in the price.

Original or Analog Screen: Which to Choose?

The main question when replacing is whether to overpay for the original display or to do with an analogue.

• ✅ Original screen (OEM):
• ❌ Cons: the price is 2-3 times higher than the analogue, is not always available.

• ✅ Quality analogue (BOE, Tianma, Truly):
• ❌ Cons: small differences in color reproduction, shorter service life (especially in cheap models) are possible).

• ❌ Budgetary analogue (no-name):
• ⚠️ Risks: rapid loss of sensor sensitivity, pixel burnout, detachment after 2-3 months.

Tip: if you plan to use the phone for another 1-2 years, the best option is a quality analogue from a proven manufacturer (for example, the best option is a high-quality analogue from a proven manufacturer, BOE). It'll cost 2,500 to 3,500. ₽ with installation and will serve no worse than the original with careful operation.

💡

Before buying an analog screen, make sure that the kit comes with new plumes and double-sided tape. Cheap sets are often sold without them, and the wizard will have to use old parts, which will reduce the life of the kit.

Where to replace the screen with Redmi 9C: TOP-5 variant

The choice of the repair site directly affects the final cost, and let's look at all the options, from the most reliable to the most budgetary.

1. Official Xiaomi Service Center

✅ Pros: 6-12 months warranty, original spare parts, professional equipment.

❌ Cons: High price (5,500–7,000) ₽), long wait (3 to 7 days).

📍 How to find: list of official services on the site mi.com/ru/service.

2. Authorized Xiaomi Partners

✅ Pros: prices 10-15% lower than official, 3-6 months warranty, original or certified parts.

❌ Disadvantages: Not all partners work with Redmi 9C (check it out on the phone).

3. Private service centres

✅ Pros: Price 20-40% lower (2,800-4,500) ₽), rapid repair (1–2 hours).

❌ Cons: the risk of poor-quality installation, there is no guarantee for spare parts (only for work).

🔍 How to Choose a Reliable Workshop:

• 📌 Check reviews on Yandex.Maps or 2GIS.
• 📌 Ask what type of adhesive you use (optimal — B-7000 or LOCA).
• 📌 Check if you have a screen guarantee (at least 1 month).

4. Self-substitution

✅ Pros: Minimum price (1,200–3,500) ₽ for a spare part).

❌ Cons: high risk of damage to plumes or matrix, no guarantee.

🛠️ What's the matter:

• 🔧 Setting screwdrivers (PH00, Y00).
• 🔥 Hair dryer or glue heating station.
• 🧲 Screen-take-down suction cups.
• 📦 New screen with glue and plumes.

5. Online order with home installation

✅ Pros: convenient, some services offer discounts for online ordering.

❌ Cons: the risk of running into scammers, the price is often higher than in offline workshops.

⚠️ If you are asked to replace the screen with Redmi 9C less than 1,800 ₽, They're probably using used parts or low-end analogs, and they rarely last longer than 2-3 months.

Clarify the screen type (original/analogue)|Ask for a Parts and Work Guarantee|View reviews about the workshop|Check if the price includes replacement of glue and plumes|Take a photo of your phone before repair (in case of disputes)

-->

Step-by-step: how to replace the screen on Redmi 9C yourself

If you're going to make a self-repair, follow this instruction. Importantly, the process requires care and patience - one mistake can lead to a complete breakdown of the phone.

Step 1: Preparation of tools

You'll need:

• 🔧 Screwdrivers: PH00 (cross-section), Y00 (triangular).
• 🧲 Suction cups (2 pcs) for screen removal.
• 🔥 Dryer or infrared station for heating glue.
• 📱 Plastic mediators for disengaging the body.
• 🧴 Alcohol or solvent for cleaning glue residues.
• 📦 New screen with glue and plumes (for example, ordering for AliExpress).

Step 2: Disassembling the phone

1. Turn off the phone and remove it. SIM-memory-card.
2. Heat the screen edge with a hair dryer (60–70°C) for 2-3 minutes to soften the glue.
3. With the suction cups, gently raise the screen. Don't pull too much -- there are plumes underneath!
4. With a plastic mediator, walk around the perimeter, separating the screen from the body.

Step 3: Disconnecting the plumes

1. Unscrew the screws that fix the metal plate over the plumes (use a screwdriver). PH00).
2. Carefully disconnect the sensor and display plumes (put them under a plastic spatula).
3. Take a picture of the location of the plumes, so as not to confuse the assembly.

Step 4: Install a new screen

1. Remove old glue from the phone frame (use alcohol and a napkin).
2. Apply a new glue (unless it is pasted on the screen in advance).
3. Connect the plumes to the new screen and fix them with a metal plate.
4. Carefully press the screen, starting at the top to avoid bubbles.

Step 5: Verification and Assembly

1. Connect the phone to charging and check the sensor and display.
2. If everything works, twist the screws and glue the back cover (if removed).

⚠️ Typical Beginner Mistakes:

• 🔹 Damage to the plume during disconnection (repair will cost 1,000-1,500) ₽).
• 🔹 Incomplete removal of old glue → The new screen will be out in a week.
• 🔹 Dryer overheating → battery-damage.

How to save money on screen replacement: 5 working ways

Replacement of the screen with Redmi 9C It can cost a lot, but there are ways to cut costs without compromising quality.

1. Buy the screen yourself

Many workshops charge 30 to 50 percent for parts, buy a screen yourself on AliExpress, Beru, or at local radio parts stores.

• 📱 Original screen: 3,500–4,500 ₽ (5,500 ₽ service).
• 📱 Quality analogue (BOE): 1 800–2 500 ₽.

2.Look for stocks and discounts

Xiaomi’s official services and some workshops regularly hold promotions, such as:

• 🎁 10-15% discount when ordering through the website.
• 🎁 Free diagnostics during repair.
• 🎁 Guarantee +3 months for recall.

🔍 Where to follow: groups of services in VKontakte, sites of aggregators (for example, RemOnline).

3. Change only the glass (if the matrix is intact)

If only the outside glass cracked, and the image and sensor are working, you can only replace it. It's 1,500 to 2,500 cheaper. ₽:

• 🔧 Cost of work: 1,000–1,500 ₽.
• 🔧 Glass price: 500-1000 ₽.

4.Exchange the old screen for a discount

Some workshops take broken screens as a cost-added measure, like renting out your cracked display and getting a 300-500 discount. ₽.

5. Repair in smaller towns

In Moscow or St. Petersburg, the screen replacement will cost 1,000-1,500 ₽ If possible, contact the workshop in the nearest sister city.

💡

The most reliable way to save money is to buy a quality analog screen yourself and give it to the workshop only for installation, so you save up to 40% of the cost of repairs.

Frequent screen replacement problems and how to avoid them

Even after a successful repair, there can be unpleasant surprises, and let's look at the most common problems and ways to prevent them.

1.The screen "floats" or twitches when pressed

🔹 Reason: poorly glued display or damaged plume.

🔧 Solution: reglue the screen using high-quality glue (LOCA or B-7000).

2.The sensor is delayed or does not respond to touch

🔹 Reason:

• 🔸 Incorrect connection of the plume.
• 🔸 Defect of the new sensor (especially in cheap analogues).

🔧 Solution: check the connection of the plumes or replace the sensor separately (800-1200) ₽).

3. There's been yellow spots or divorces.

🔹 Reason: Used poor-quality glue or screen was installed without cleaning the old adhesive.

🔧 Solution: disassemble the phone and reglue the display with a complete cleaning of the frame.

4 The screen has become less bright or has changed colors

🔹 The reason: 90% of the time, this is a feature of cheap analog screens (especially no-name screens).

🔧 Solution: Calibrate colors in settings (Settings) → Display. → Color mode) or replace the screen with a better quality.

5.The phone does not turn on after replacement

🔹 Reason:

• 🔸 Damaged motherboard (for example, when overheating with a hair dryer).
• 🔸 The battery or other plumes have disconnected.

🔧 Solution: carry to the service for diagnosis (cost from 500) ₽).

⚠️ Warning: If the screen starts to warm more than usual after the replacement, this is a sign that the display matrix or controller is damaged.

FAQ: Frequent Questions About Redmi Screen Replacement 9C