Xiaomi Redmi 8 is one of the most popular budget smartphones released in 2019, but even after 5 years it remains in demand due to reliability and low price. However, the most vulnerable part of any phone is the screen. Falling from a height, hitting or even a bad press can lead to cracks, broken pixels or a complete failure of the display. If you encounter such a problem, the first thing that worries is how much it will cost to replace the screen and where to do it.
In this article, we will analyze the current prices for replacing the Redmi 8 display in 2026, compare the cost in official services and private workshops, talk about the nuances of the choice of spare parts (original vs analogue), and give practical tips on how to save without losing quality.
How much does it cost to replace the display Xiaomi Redmi 8: current prices 2026
The cost of replacing the screen depends on three key factors: the type of display (original or analog), the region of repair (Moscow, regions, other cities), and the status of the service center (official partner Xiaomi or private workshop).
| Type of display | Cost (₽) | Where to replace | Guarantee |
|---|---|---|---|
| Original (OEM) | 5 500 — 7 000 | Official Xiaomi services | 6–12 months |
| High quality analogue (A+) | 3 500 — 5 000 | Private workshops | 3–6 months |
| Medium quality analogue (A) | 2 500 — 3 500 | Small services | 1-3 months |
| B/U original (from disassembly) | 2 000 — 3 000 | Private craftsmen | No guarantee. |
It is important to note that the price already includes the work of the master (from 800 to 1,500). ₽ For example, if the screen not only crashed but also damaged the plume or sensor, the price could go up by 1,000 to 2,000. ₽. Also, some services charge a surcharge for urgent repairs (for 1-2 hours) - up to 500 ₽.
Original vs analogue: which display to choose for Redmi 8
The main question when replacing a screen is to take the original part or save on the analogue. There is no clear answer: it depends on your quality requirements and budget.
- ✅ Original display (OEM): Full factory performance, perfect color reproduction, no artifacts when touched, minus high price and shortage (not all services work with original parts).
- ✅ Class A analogue+: It's almost indistinguishable from the original, but it can have dimmer lighting or less clear viewing angles.
- ⚠️ Class analogue A/B: Noticeable differences in color, possible dead pixels or sensor delays, suitable only for temporary solutions.
- 🔄 Original: the most budget option, but the risk of getting a screen with hidden defects (for example, burned out subpixels) is very high.
If the phone is used to work with graphics, photos or games, you should not save on the display - it is better to take the original or analogue of A+. For everyday tasks (social networks, calls, instant messengers), a high-quality analogue will also suit.
💡
Before replacing, ask the wizard to show you the new display in operation – turn on the test mode (type ##6484##) and check the uniformity of the backlight and sensor response.
Where to replace the screen: comparison of services
Choosing a repair site is as important as choosing a part: Xiaomi's official service centers guarantee quality, but their services are 20 to 30 percent more expensive; private workshops may offer lower prices, but there is a high probability of running into unscrupulous performers.
1. Official Xiaomi Service Centers
Pros:
- 🔧 Use only original or certified parts.
- 📜 Guarantee up to 1 year for work and details.
- 🛡️ Preserves factory tightness (important for moisture protection).
Cons:
- 💰 Price is higher by 30-50% compared to private.
- ⏳ Repair period – 3 to 7 days (no express services).
2. Xiaomi Certified Partners
These are private workshops that have passed brand verification and have access to original parts, prices are 10-15% lower than in official centers, and the warranty is maintained, and you can find such services on the official Xiaomi website in the section "Service centers".
3. Private workshops and “home repairs”
The most budget option, but also the most risky. ₽ for an analog screen, but:
⚠️ Attention: About 40% of private workshops use cheap Chinese Class C or B displays, which in 2-3 months start to "glutch" (spontaneous touches, flickering!
If you are choosing a private workshop, pay attention to:
- 📌 Reviews on Yandex.Maps or Google (especially negative ones – how the wizard reacts to them).
- 🔍 Presence of photos of Redmi 8 repair in the portfolio.
- 💬 Preliminary diagnosis (free or for a nominal fee).
☑️ How to check the workshop before repair
How much does it cost to replace the screen Redmi 8
If you have experience in electronics repair, you can save money by replacing the display yourself.
- Original module: 4,000–5,500 ₽ (on AliExpress or in specialized stores).
- Analogue A+: 2 500–3 500 ₽.
- Toolkit (suction cup, mediator, screwdriver): 300-800 ₽ (if not).
However, self-repair has risks:
⚠️ Attention: If you take off the old display in a careless manner, you can damage the battery or camera plume, which will lead to additional costs, and without special glue, the new screen can fit poorly, causing a gap and dust. If you do, here is a step-by-step instruction: Turn off the phone and remove it. SIM-Heat the edges of the screen with a hair dryer (temperature 60-70)°C) to soften the glue. Gently apply the screen to the mediator starting at the bottom edge. Unplug the display and battery plumes (see iFixit photo of the diagram) Install the new module, plug the plumes in and paste the screen with a new adhesive. Check the density of the plumes — sometimes they will depart when assembled. Also make sure the battery is connected (the phone won't turn on without it). If the problem remains, it may be damaged display controller on the motherboard. Sometimes replacing the display can cost almost the same amount as buying a used Redmi 8 in good condition: 💀 Phone over 4-5 years old and already "brakes" in everyday tasks. 🔥 In addition to the screen damaged motherboard or battery (repair will cost 8 000).+ ₽). 📉 You can find a used Redmi 8 for 4,000–5,000 ₽ working-age. 🔄 You plan to upgrade your phone soon, in which case it’s easier to save for a new model. For comparison: the average price of a used Xiaomi Redmi 8 on Avito in 2026: In perfect condition: 5,000-6,500 ₽. Small scratches on the body: 4,000–5,000 ₽. Broken screen (parts): 1,500–2,500 ₽. 💡If the cost of repair exceeds 60% of the price of a used phone in good condition, it is more profitable to buy another device. How to save on screen replacement: 5 working ways Even if you choose an official service or a quality analog, you can reduce the final amount. Here are proven ways: Look for promotions: Many services offer discounts for repairs at the beginning of the month or before the holidays. For example, Connected Service often has 10 to 15 percent promotional codes. Order the parts yourself: Some workshops agree to install a display that the customer has bought, save on a margin (usually 20 to 30 percent). If you need to replace, for example, the battery or speaker, do everything at once - many services offer a discount on comprehensive repairs. Check the cashback: Pay for repairs with a cashback card (for example, Tinkoff or Sberbank) - 1-5% of the amount will return. Some workshops accept broken Redmi 8 displays as a credit (usually a discount of 200-500). ₽). Another non-obvious way to save money is to have your phone repaired, if you have a phone insurance policy (like when you buy on credit), check if it covers mechanical damage, sometimes the insurance company pays up to 80 percent of the cost of the repair, and often problems after the screen is replaced and how to avoid them. Here are the most common and ways to eliminate them: Problem Possible cause Screen solution flickering or spontaneously fading Bad plume contact Disassemble phone and reconnect plume Some sensor areas Damage to the touch layer or improper calibration Refresh phone or replace display Colors became dull or with Low-quality analog display Replace with original or class A analogue+ The phone overheats after repair Damaged by a heatfall or incorrectly installed screen Check the heat conductive gaskets If problems appeared in the first days after repair, do not try to fix the phone yourself - contact the workshop where you changed the screen. Under the guarantee, they are obliged to eliminate defects free of charge. 💡After changing the screen, reset to factory settings (Settings) → The phone. → Resetting settings). This will help to avoid glitches with sensor calibration. FAQ: Answers to the common questions: Can you replace only the glass, not the entire display? Technically yes, but on Redmi 8 it is almost never profitable. The display of this phone is made using OLED-on-cell technology, where the glass is glued to the matrix. Separating layers requires special equipment and costs almost as much as replacing the entire module (3000-4000). ₽). The exception is if you have access to cheap parts (like a master). How long does it take to change the screen? Most services take 30 minutes to 2 hours to do it if the master is free. In official Xiaomi centers, the time can be as long as 3-5 days from behind the queue. When you replace yourself, it takes 3-4 hours for beginners (accounting for acclimatization of glue). Will the phone be waterproof after changing the screen? No. Xiaomi Redmi 8 does not have an official water protection rating (IP), and when replacing the screen, the sealing of the case is broken. Even if the wizard uses the original glue, the moisture resistance will be lower than that of the new phone. Avoid getting liquid on the device. Can you use a phone with a broken screen if the sensor is working? Technically, this is fraught with consequences: glass fragments can hurt your fingers. Dust and moisture will get inside the case, which will lead to corrosion of contacts. If the matrix is severely damaged, you can overheat and ignite the Redmibi (Particular cases, you can buy a Motmi for the screen with 8 LC, for example, if you can buy a screen with a screen from the original 8 LCD). Official Xiaomi distributors (list on the brand website) The cost of the original module is from 4 500 ₽. Beware of fakes: the original has a Xiaomi logo on the plume and a hologram on the packaging.