Xiaomi Redmi Note 8 Pro remains one of the most popular smartphones in the budget segment even years after its release. But over time, the back cover of the device can crack from impact, scratch or simply lose its presentable appearance. If you are faced with this problem, the first question is: how much does it cost to change the back cover and where to make it more profitable – in a service center, at a private master or with your own hands?
In this article, we will discuss the current prices for replacing the rear panel for the Redmi Note 8 Pro in 2026, compare the cost of original and non-original parts, and also tell you how to avoid typical repair errors. You will learn why some services can vary the price by 2-3 times, what hidden risks are hidden by cheap offers and how to check the quality of the installed cover.
Why the back cover on the Redmi Note 8 Pro breaks: the main reasons
The Redmi Note 8 Pro's back is made of Gorilla Glass 5, which is scratch-resistant but still fragile when mechanically impacted, and the most common causes of damage are:
- 💥 Hits and falls – even from a low height (such as a table) the lid can crack or split.
- 🔥 Temperature changes – if the smartphone has been lying in the cold for a long time or, conversely, overheated in the sun, the glass can deform.
- 🔧 Sloppy repairs – when replacing the battery or other internal components of the master often damage the mounts of the cover.
- 🛠️ Wear glue - over time, the factory glue loses its properties, and the lid begins to move away at the edges.
It's important to understand that a crack in the back is not just an aesthetic problem, because the cracks can get dust and moisture, which over time will lead to oxidation of the contacts or even short circuit, so you shouldn't ignore the damage.
How much does it cost to replace the back cover in service centers: a comparison of prices 2026
The cost of replacing the back cover depends on several factors: the type of part (original or analogue), region, status of the service center and complexity of work. Below is a table with the current prices for the Redmi Note 8 Pro in official and unofficial services:
| Type of service | Type of cap | Cost (₽) | Duration of repairs | Guarantee |
|---|---|---|---|---|
| Official Xiaomi Service (Mi Service) | Original. | 4 500 – 6 000 | 1-3 days | 6 months |
| Authorized Partner of Xiaomi | Original. | 3 800 – 5 200 | 1-2 days | 3–6 months |
| Unofficial service (with guarantee) | Analogue (quality) | 2 000 – 3 500 | 2-4 hours | 1-3 months |
| Private Master (without warranty) | Analogue (budgetary) | 1 200 – 2 500 | 1-2 hours | No. |
As you can see from the table, the price difference between the original and the non-original cover can be as high as 3,000 to 4,000 rubles. However, it is important to consider the quality of the adhesive and assembly. In cheap services, they often save on adhesive composition, which can cause the lid to move away in a few months.
⚠️ Note: Some services use fakes as "original" covers. To avoid deception, ask for a part in the package with a Xiaomi hologram or check it for the Redmi logo under the name of the "original" cover. UV-lamp (original glows blue).
Previous Previous post: What is the best choice for Redmi Note 8 Pro
When you replace the back cover, you'll be offered a choice of original parts or analogues, and to make an informed choice, compare the pros and cons:
- ✅ The original cover:
- ❌ Cons: high price (from 4000) ₽), not always available.
- ✅ A quality analogue (e.g. from Aukey or KSP):
- ❌ Cons: possible small gaps, glue worse holds, no protection from moisture.
If your Redmi Note 8 Pro doesn’t have official water protection (IP53), the difference between the original and the good one will be minimal, but if the smartphone has not been disassembled before and is kept factory sealed, it’s better to choose the original one – this will prolong the life of the device.
How to distinguish the original cover from a fake?
Self-replacement of the back cover: step-by-step instructions
If you decide to save money and replace the cover with your own hands, you will need:
- 🔧 Set of screwdrivers (cross, flat, flat, T3, T5).
- 🧲 Suction cup for lid removal.
- 🔥 Fryer (for heating glue).
- 📦 New back panel. + glue (B-7000 or similar).
- 🧤 Gloves (to avoid leaving fingerprints on the inside of the lid).
Replacement process:
- Turn off your smartphone and remove it. SIM-map + memory-card.
- Heat the hair dryer of the edge of the cover (temperature ~60°C) for 2-3 minutes to soften the glue.
- Suction the lid at the charging connector and carefully separate it from the body.
- Unscrew all the screws (about 15 of them, fold in a separate container, so as not to lose).
- Disconnect the battery plumes, cameras and buttons (photo stage is necessary, so as not to confuse the assembly!).
- Remove old glue from the smartphone frame (you can use alcohol or acetone).
- Apply a new glue to the frame, install a new cover and press tightly.
- Collect the smartphone in reverse order, check the performance of all buttons and sensors.
1. make a backup copy of the data (in case of error).
2. charge the battery by 30-50% (not 100%!).
3. Prepare the workplace (clean surface, good lighting).
4. View video instructions specifically for the Redmi Note 8 Pro.-->
⚠️ Warning: If you replace yourself, you risk damaging the plumes or tearing off the battery contacts. If you've never taken down your smartphones, you'd better leave it to the professionals -- repairs are cheaper than replacing the display or motherboard due to an error.
Where to replace the back cover: a comparison of options
To save money, many people look for the cheapest deals, but the low price often hides the pitfalls. Let's compare the pros and cons of different options:
| Repair option | Pluses | Cons | Recommendation |
|---|---|---|---|
| Official Xiaomi service | Warranty, original details, proven quality | Expensive, long-term repairs, not in all cities | If the smartphone is guaranteed or you need the original |
| Authorized partner | Prices lower than Mi Service, there is a guarantee | They can find an unoriginal detail. | Optimal balance of price/quality |
| Unofficial service with guarantee | Fast, cheap, often good quality | Risk of running into a poor-quality glue or detail | If you need a quick repair and don’t have money for the original |
| Private Master (without warranty) | The lowest price, you can negotiate a discount | No guarantee, high risk of marriage | Only if the master is checked or the smartphone is not sorry. |
| Self-sustaining replacement | Minimum Costs (parts + tools only) | Risk of damaging smartphone, no guarantee | Only for experienced users |
If your budget is limited, but you want quality repairs, look for services with a lifetime glue guarantee. Such workshops usually use good materials and do not save on assembly. Also, before repair, check the reviews about the service on Yandex.Maps or 2GIS - this will help to avoid scams.
💡
Before you hand over your smartphone for repair, take a picture of the IMEI (dial *#06#) and the serial number (in settings or under the battery) to prove that your device was returned, not the replacement.
Hidden costs: what else can impose a surcharge
In some services, the total amount may be higher than the initial amount, and here is what you should pay attention to not overpay:
- 🔋 "Diagnosis” (200-500) ₽) — It is often included in the cost of repairs, but some services are taken separately.
- 🛡️ "Additional protection” (500-1000) ₽) — They will be asked to put a film or cover on it, although it is not necessary.
- 🔧 "Complex dismantling" (1000-1500) ₽) — If the cover is badly damaged, you can take a surcharge for its removal.
- 📦 "Express repairs (30-50% of the cost) – speeding up repairs for an additional fee.
- 🔄 "Dust cleansing” (300-800) ₽) — It is often imposed, although it can be done for free at home.
To avoid unexpected expenses, check the finale price in advance and ask for an estimate with the signature of the master. If you are told that "the price will be known after the dismantling", this is a reason to be wary - honest services always call the cost in advance.
💡
The safest way to avoid surcharges is to request a written estimate before repairs begin, which must include all the work and details with the prices, and if the master refuses to provide it, look for another service.
Frequent mistakes when replacing the back cover and how to avoid them
Even in service centers, sometimes mistakes are made that lead to more breakdowns, and here are the most common joints and how to prevent them:
- 🔌 Badly glued lid → In a month, it'll start to move around the edges. How to avoid it: ask what glue you're using (optimal — B-7000 or T-7000).
- 📱 Damaged plumes → After repairs, buttons or camera don't work. How to avoid: ask the wizard to check all the features before assembly.
- 🔊 Incorrect setting of the speaker → How to avoid it: after repairs, test the volume at the maximum level.
- 🔋 Battery problems → How to avoid: make sure that the master did not damage the battery during dismantling.
- 🌡️ Processor overheating → If you forgot to put the heat paste on the chip, how to avoid: after repair, check the temperature in the CPU Monitor.
If you notice at least one of these problems after replacing the lid, immediately return to the service - under the guarantee they are obliged to fix the defect for free. If they refuse, demand a written refusal and contact Rospotrebnadzor.