The Xiaomi Redmi 7, released in 2019, is still a popular budget smartphone due to its balanced specs and affordable price. However, over time, even reliable equipment fails – one of the frequent problems of owners of this model is caused by camera failure. Blurred images, a black screen during shooting or a “failed to connect to the camera” error can indicate a hardware failure. In this article, we will analyze how much it costs to change the camera on the Redmi 7 in 2026, what factors affect the price and how to avoid overpayments.
It is important to understand that the cost of repair depends not only on the type of camera (main or front), but also on the service chosen, the region, and the condition of the device itself. For example, replacing a module in an official Xiaomi service center will cost more than a private master, but guarantees original parts and retaining the warranty (if it is still valid), while saving on cheap analogues can lead to repeated breakdowns or deterioration of the quality of the photo.
Next, we will analyze the average prices in Russia, compare repair options, and give practical tips on how to prepare the phone for replacement and what to look for when choosing a master.
How much does it cost to replace the camera on Xiaomi Redmi 7: current prices 2026
The cost of repair depends on the type of camera and the level of the service center, and below is an indicative price list for Moscow and the regions (prices are indicated taking into account work and spare parts):
| Type of camera | Official Xiaomi service | Authorized partner | Private workshop | Self-sustaining replacement |
|---|---|---|---|---|
| Main camera (12 MP) | 3 500 — 4 800 ₽ | 2 800 — 3 900 ₽ | 1 800 — 3 000 ₽ | 800 — 1 500 ₽ (just a spare part) |
| Front camera (8 MP) | 2 700 — 3 500 ₽ | 2 000 — 2 800 ₽ | 1 200 — 2 200 ₽ | 500 — 1 000 ₽ (just a spare part) |
| Replacement of camera glass (without module) | 1 500 — 2 200 ₽ | 1 000 — 1 800 ₽ | 600 — 1 500 ₽ | 300 — 800 ₽ (just a spare part) |
Prices in the regions may vary by 15-30% in a lower direction, for example, in cities with a million people (St. Petersburg, Yekaterinburg, Novosibirsk), the cost will be close to Moscow, and in small towns - lower by 20-40%, also affecting the total amount:
- 🔧 The complexity of the breakdown: if not only the module, but also the plume or connector on the motherboard is damaged, the price will increase by 1,000-2,500 ₽.
- 📦 Part Type: Xiaomi’s original module costs more than its Chinese counterpart, but will last longer.
- ⏳ Urgent: express repair (for 1-2 hours) can cost 30-50% more than the standard.
- 🔄 Additional work: cleaning connectors, replacing glue or sealant will increase the cost by 300-800 ₽.
Important: In 2026, there were many fake Redmi 7 camera modules on the market that are seemingly indistinguishable from the original, but have worse shooting quality (noise, color distortion).
Main vs front camera: what is more expensive to fix and why
Xiaomi Redmi 7 has two cameras: the main 12 MP (with double flash) and front 8 MP. Their design and repair cost are very different:
- 📸 The main camera is harder to replace because: It requires a gentle disconnection of the plume from the motherboard, often glued to the body, which makes it difficult to dismantle. It includes not only the matrix, but also autofocus, which increases its cost.
- 👤 Front camera is cheaper to repair, but has its own nuances: It is located under the screen, so when you replace it, there is a risk of damage to the display. Often breaks due to moisture (for example, in the flood of the phone). Cheap analogues can give a strong "soap" effect on the photo.
If only the lens is broken (for example, the glass cracked), and the matrix is working, you can do with replacing the glass for 600-1 500 ₽. However, in 80% of cases, the camera itself suffers from mechanical damage, so a complete replacement of the module is required.
⚠️ Attention: Redmi 7 main camera is connected to the board through a fragile plume. If the master is not neatly disconnected, it may require soldering (additional). +1 500–2 500 ₽). Check with the specialist whether this service is included in the base price.
Where to repair: Comparison of options
The choice of service depends on your priorities: reliability, speed or price.
| Type of service | Pluses | Cons | Average price (main camera) |
|---|---|---|---|
| Official Xiaomi service | ✅ Original spare parts ✅ 6-12 months warranty ✅ Diagnosis before repair | ❌ Expensive. ❌ Long term (3-7 days) ❌ Not all cities are covered. | 3 500 — 4 800 ₽ |
| Authorized partner | ✅ Prices are lower than in the official service ✅ Faster (1-3 days) ✅ Often give a guarantee. | ❌ Risk of unoriginal spare parts ❌ The quality of the work depends on the master. | 2 800 — 3 900 ₽ |
| Private workshop | ✅ Lowest price ever. ✅ Opportunity to negotiate a discount ✅ Quick repairs (1–2 hours) | ❌ There is no guarantee or it is minimal. ❌ Risk of poor quality spare parts ❌ Maybe there's no check. | 1 800 — 3 000 ₽ |
| Self-sustaining replacement | ✅ Minimum costs ✅ Full control of the process | ❌ Hard without experience (risk of damaging fees) ❌ No guarantee. ❌ Need tools (suction cup, tweezers, hair dryer) | 800 — 1 500 ₽ (spare) |
If the phone is still warranty-worthy (unlikely for the Redmi 7 in 2026, but possible when buying a used one with a re-registration), repairs to an unofficial service will cancel it, in which case it is better to contact an authorized center, even if it is more expensive.
💡
Before repairing, back up your data! replacing the camera may require resetting, especially if the wizard accidentally damages the motherboard plume.
Step-by-step: how to prepare your phone for a camera replacement
To make the repairs quick and without any unpleasant surprises, follow a few simple steps:
Make a backup copy of photos and contacts|Get out. SIM-memory-card|Write it down. IMEI telephone (in case of loss)|Disable the pattern lock/password (if the wizard requires testing)|Check the camera before repair (to shoot a test video)-->
If you are going to replace the camera yourself, you will need to:
- 🔧 Set of screwdrivers (cross, flat, flat, T2–T5).
- 🧲 Removal suction cup.
- 🔥 Hair dryer or thermo-air station (for softening glue).
- 🧷 Plastic mediators (so as not to scratch the body).
- 📦 New camera module (check compatibility with Redmi 7!).
The replacement process takes 30-60 minutes with experience, and if you've never taken a smartphone apart, it's best not to take risks - errors when disconnecting the plume or installing the module can lead to a complete failure of the phone.
⚠️ Attention: Redmi 7 has a back cover glued to it, not latched, and if you don't remove it, you can damage the antenna contacts (network signal will deteriorate) or crush the battery. Use a dryer at a minimum temperature (60-80).°C)!
Common causes of camera failure on Xiaomi Redmi 7
The camera on Redmi 7 can fail for several reasons.
- 💥 Mechanical damage: falling of the phone, hitting the camera or pressure on the body (for example, if you sit on a smartphone.
- 💦 Moisture: Even if the phone hasn’t sunk, condensation or high humidity can oxidize plume contacts.
- ⚡ Software failures: after the update MIUI or install custom firmware camera may stop working (solved by resetting or flashing).
- 🔌 Problems with the plume: if the camera periodically turns off or the image “breaks”, the fault is poor contact between the module and the board.
- 🔋 Overheating: Long-term video shooting in 4K or games with a camera on (for example, in the PUBG Mobile) can cause module overheating.
Before you carry your phone for repair, try diagnosing the problem:
- Reboot your smartphone.
- Check the camera in safe mode (hold the power button) → «Safe regime»).
- Install a third-party camera app (like Open Camera) – if it works, the problem is the firmware.
- Light a flashlight into the lens: if you see damage to the lens, you need a replacement.
If the camera doesn’t work even after resetting, the problem is precisely hardware.
How to Save Money on Repairs Without Losing Quality
Replacing a camera isn’t the cheapest procedure, but there are ways to reduce costs:
- 🛒 Buy parts yourself: workshops often charge 30-50% on the cost of the module. On AliExpress or in trusted stores (for example, Fix-Price), the original main camera module can be found for 1,000-1 500 ₽.
- 📅 Search for promotions: Many services make discounts for repairs at the beginning of the month or before the holidays.
- 🤝 Make arrangements for comprehensive repairs: if you need to replace not only the camera, but also, for example, the battery or glass, the master can make a discount.
- 📱 Check used modules: on Avito or Yule sometimes sell working cameras with disassembly for 500-800 ₽.
- 🔧 Choose workshops with reviews: cheap repairs can turn into a re-breaking. Look for services with a rating of at least 4.7 on Yandex.Maps or 2GIS.
If you have a budget, consider buying a used Redmi 7 for parts, which is 2,000-3,500. ₽, But you'll get not just a camera, but a spare battery, speaker, or button.
⚠️ Note: When buying a camera module on AliExpress, pay attention to the reviews with photos! Many Chinese sellers send fakes that are seemingly indistinguishable from the original, but have poorer shooting quality (especially in low light conditions).
What to do if the camera is worse after the replacement
Sometimes, after repairs, Redmi 7 owners face new challenges:
- 📷 Blurred photos – perhaps the master did not fix the module well or used an unoriginal spare part.
- 🔴 Constant focus (autofocus does not work) – a problem with a plume or improper installation.
- 🌈 Distorted colors – a cheap matrix with poor color reproduction.
- 🔄 The camera periodically shuts down - poor contact plume with the board.
Here's what we can do:
- Return to the master: if the repair was guaranteed, he is obliged to eliminate the defects free of charge.
- Check the camera settings: resetting to factory can help (but not if the problem is hardware).
- Install third-party software: GCam sometimes works better with non-original modules.
- Contact another service: if the master refuses to correct errors, write a claim (a sample can be found on the website of Rospotrebnadzor).
If the camera gets worse after self-replacement, check:
- The density of the module to the housing (there should be no gaps).
- The purity of the contacts of the plume (wipe with alcohol).
- The resolution settings in the camera app (sometimes are confused by the minimum).