Xiaomi screen repair: prices of 2026 for replacement of the display in service centers and independently

A broken smartphone screen is one of the most common breakdowns faced by Xiaomi owners: falling on asphalt, hitting a hard surface, or even failing to fit in a key pocket β€” and here you have a network of cracks, broken sensors, or a completely black display. In 2026, the cost of a screen repair depends on the phone model, the type of damage and the method of recovery chosen: official service, a third-party workshop or self-replacement.

In this article, we will analyze the current prices for screen replacement for popular Xiaomi models - from the budget Redmi Note 12 to the flagship Xiaomi 14 Pro, compare the cost of original and non-original spare parts, and also tell you how to save without the risk of getting poor-quality repairs. You will learn how much you will have to pay for replacing glass, touchscreen or a full display module, and where it is best to ask for help.

What the cost of screen repair Xiaomi depends on

The price of a replacement display can vary by 2-3 times even for the same model, due to several key factors:

  • πŸ“± Smartphone model – flagship devices (Xiaomi) 13T Pro, Mix Fold 3 are more expensive due to complex design and spare parts shortages.
  • πŸ”§ Type of damage – cracked glass, broken touchscreen or completely broken OLED-Module requires different approaches.
  • 🏭 The manufacturer of spare parts – original displays from Xiaomi are 1.5-2 times more expensive than their counterparts, but they guarantee the quality of color and sensitivity of the sensor.
  • πŸ“ Repair site – official service centers take 20-30% more than private workshops, but give a guarantee.

For example, replacing the screen with the Redmi Note 11 Pro in the official service will cost 8000-12,000 rubles, while in a private workshop you can meet 5000-7000 rubles with an analog display. But for the Xiaomi 13 Ultra the difference is even more noticeable: the original screen costs 25 000-30,000 rubles, and the non-original one - from 15 000 rubles.

πŸ“Š Where do you usually repair your phone?
In the official service Xiaomi
In a private workshop.
Independently.
Never repaired.

The price is also affected by urgency: some services offer express repairs in 1-2 hours, but with a premium of 10-15%. Another nuance is additional work, such as replacing glue, checking plumes or calibrating sensors, which can increase the total amount by 1,000-3,000 rubles.

Below is a table with the current prices for the repair of displays for the most popular Xiaomi smartphones.The cost is indicated for a complete replacement of the screen module (including glass, touchscreen and matrix) in official service centers and private workshops in Moscow and the regions. Prices can vary depending on the city and the dollar rate.

Smartphone modelOfficial Service (original)Private workshop (original)Private workshop (analogue)
Xiaomi Redmi Note 12 Pro+12 000 – 15 000 β‚½9 000 – 11 000 β‚½5 000 – 7 000 β‚½
Xiaomi 13 Lite14 000 – 17 000 β‚½10 000 – 12 000 β‚½6 000 – 8 000 β‚½
Xiaomi 13 Pro22 000 – 26 000 β‚½18 000 – 21 000 β‚½12 000 – 15 000 β‚½
Xiaomi Mix Fold 335 000 – 40 000 β‚½30 000 – 35 000 β‚½20 000 – 25 000 β‚½
Xiaomi Poco X5 Pro9 000 – 11 000 β‚½7 000 – 9 000 β‚½4 000 – 6 000 β‚½

Important: For foldable smartphones (for example, Mix Fold 3), the cost of repairing the internal screen can exceed 50 000 rubles due to the complexity of the design and the shortage of spare parts. Also note that in some cases, the masters offer partial repairs - for example, replacing only glass (if the matrix is intact), which costs 30-50% less.

πŸ’‘

Before repairing, check if your smartphone is under warranty. Even if the screen crashed at your fault, some services offer discounts on parts for devices under 1 year old.

Official service vs private workshop: where cheaper and more reliable

The choice between a Xiaomi service center and a private workshop depends on your priorities: price, speed or warranty.

Official Xiaomi Service Center

  • βœ… Work and parts warranty (usually 6-12 months).
  • βœ… Used original displays with factory calibration.
  • βœ… Professional equipment for diagnosis and repair.
  • ❌ Prices are 20-30% higher than in private workshops.
  • ❌ Long term repair (from 3 to 7 days).

Private workshop

  • βœ… Lower cost (up to 40% savings on parts).
  • βœ… Quick repairs (often in 1-2 hours).
  • βœ… Option between the original and the analog.
  • ❌ The risk of running into poor quality parts or unscrupulous masters.
  • ❌ The warranty is not always given or limited to 1-3 months.

If you want to keep the long-term results and all the screen functions (for example, adaptive refresh rate or correct operation of the light sensor), it is better to contact the official service. For budget models (Redmi 10A, Poco M5), the price difference can be unreasonably large, and a private workshop will be a reasonable compromise.

πŸ’‘

When choosing a private workshop, be sure to check reviews, ask about warranties, and ask for a part to show before installation.The real original display has factory-labeled and a protective film with the Xiaomi logo.

Can you save money: Replacing your screen?

Replacing Xiaomi’s screen at home is a difficult task, but doable if you have experience with electronics.

  • πŸ’° Minimum costs – only the cost of spare parts (from 2 000 rubles for budget models).
  • ⏱️ No dependency on workshop schedules.

But the downsides are much greater:

  • ⚠️ Risk of damaging plumes, battery or motherboard.
  • ⚠️ No warranty – if something goes wrong, repairs to the service will cost more.
  • ⚠️ The need to buy special tools (suction cups, mediators, hair dryer for heating glue).

If you still decide to repair yourself, follow this checklist:

Buy an original or high-quality analog display (check model compatibility)

Prepare tools: plastic mediators, suckers, cross screwdriver, hair dryer

Make a backup copy of the data (in case of emergency situations)

Battery discharge to 20-30% (for safety)

Take a video of the process or follow the step-by-step instructions for your model-->

For most modern Xiaomi smartphones (such as the Redmi Note 12 or Xiaomi 13), the screen replacement process involves:

  1. Heating the body with a hairdryer to soften the glue.
  2. Careful separation of the screen with the help of suction cups and mediators.
  3. Disabling battery plumes and display.
  4. Installation of a new module and check of performance.

Warning: On models with built-in battery (such as Xiaomi 12T) there is a high risk of damage to the battery if you take the screen off sloppy. If you are not sure about your skills, it is better to entrust the repair to professionals.

What happens if you connect the cables incorrectly?
If the display or battery plumes are not connected correctly, the smartphone can: - Not turn on at all (black screen, no charging reaction). - Have artifacts on the screen (bands, flickering, broken areas of the touch screen). - Overheat or quickly discharge due to a short circuit. In such cases, you will need to repair it again, which will cost more than the original one.

How to Avoid Screen Repairs

Unfortunately, fraud is common in the smartphone repair market, from overpriced parts to substandard parts, and here are some signs of dishonest service that you should look out for:

  • 🚩 Refusal to show the spare part before installation or documents for it.
  • 🚩 Too low price (for example, replacing the screen Xiaomi 13 Pro for 8 000 rubles – a clear sign of counterfeiting).
  • 🚩 Pressure on urgency ("Now the part will rise!", "The master leaves in an hour").
  • 🚩 Lack of a check or service contract.

To protect ourselves:

  1. Before repairing, take a picture of the phone's IMEI (dial *#06#) and the serial number on the box.
  2. Ask the workshop to provide a warranty card with a seal and signature.
  3. After repair, check the operation of all functions: touchscreen, sensors, camera, speakers.

⚠️ Warning: If you notice that the colors have become dim, the brightness is not regulated or the touch screen does not respond well to touch, you probably have a low-quality analogue.

Also, you should avoid workshops that:

  • πŸ”§ They offer a β€œfree diagnostics” but then impose expensive repairs.
  • πŸ”§ They say that β€œwe also need to replace the plume / battery”, without showing evidence of a breakdown.
  • πŸ”§ Work without a sign or in basements (the risk of "one-day" workshops).

Partial repair: when you can do without a full screen replacement

A broken screen doesn't always require a complete module replacement, and in some cases, you can do a partial repair, which can save up to 50% of the cost.

1. Replace only glass (if the matrix is intact)

If the screen is cracked, but the image is clearly displayed, and the touchscreen works, you can only replace the top glass. This is true for models with glued display (for example, Redmi Note 11, Poco X4 Pro).

  • πŸ“± Budget models: 2,000 – 4,000 β‚½.
  • πŸ“± Flagships: 5,000 to 8,000 β‚½ (due to the complexity of disassembly).

Repair of plumes or contacts

If the screen flickers, part of the display doesn't work, or the touchscreen refuses to respond, the problem may be damaged plumes or oxidized contacts.

  • πŸ”§ Re-sweetening plumes (cost: 1,500 - 3,000) β‚½).
  • πŸ”§ Clean the contacts with a special solution (cost: 500 - 1,500) β‚½).

3. Touchscreen calibration

Sometimes, after a fall, the sensor will react incorrectly to touch (for example, it will press in the wrong place where you touch), this is treated by software calibration, which costs 300 - 800 times. β‚½.

⚠️ Note: Partial repairs are not always possible. 12S Ultra or Mix Fold 2 glass and matrix are soldered together, and you can't replace them separately!

How much does it cost to repair the screen, taking into account additional services

When you replace a display, the wizards often offer additional services that can both improve the result and unnecessarily increase the cost, and let's figure out what you really need and what you can do without.

ServiceCostDo I need it?
Replacement of glue for tightness500 – 1 500 β‚½βœ… Yes, otherwise dust and moisture will fall under the screen.
Cleaning the case from dust300 – 800 β‚½βš οΈ At will, but useful for durability.
Checking the operation of cameras and speakersFree (included in the diagnosis)βœ… Make sure there are no hidden damages.
Installation of protective glass500 – 2 000 β‚½βš οΈ You can do it yourself later.
Phone firmware after repair1 000 – 2 500 β‚½βŒ Only if the screen is not working due to a software failure.

For example, a complete screen repair Xiaomi 11T Pro with the replacement of glue and cleaning will cost 15,000 – 18,000 β‚½ in official service and 10,000 – 13,000 β‚½ If you're forced to have a firmware or a battery replacement for no apparent reason, that's a reason to question the master's honesty.

Tip: Before you repair, ask the workshop to make an estimate by work and parts, which will help you avoid unexpected extra payments.

FAQ: Frequent questions about Xiaomi screen repair

πŸ”Ή How long does it take to replace the screen?
In the official service - from 3 to 7 days (depending on the availability of spare parts); in a private workshop - from 1 to 3 hours (if the part is available); For foldable smartphones (Mix Fold), the period can be extended to 2-3 days.
πŸ”Ή Can I replace the screen with a guarantee if it crashes?
No, the warranty does not cover mechanical damage, but some services offer discounts on parts for devices under 1 year old.
πŸ”Ή Why does the battery quickly go down after changing the screen?
This may be due to: Poor display (analog screens consume more power); damage to the battery plume during disassembly; improper calibration of sensors; contact the workshop for diagnostics; you may need to reconnect the plumes or replace the battery.
πŸ”Ή How to check if the original screen is installed?
Signs of the original display: On the inside of the glass there is a Xiaomi logo and serial number. Colors and brightness match factory settings. Touchscreen works without delay, all gestures are supported. All modes are available in the screen settings (for example, AdaptiveSync for 120Hz). If anything is in doubt, ask for documents for the spare part.
πŸ”Ή What to do if the screen is shimmering after repair?
The flicker can be caused by: Bad plume contact (reconnected), incompatible firmware (renewed), defective display (replacement warranty required) Return to service immediately, as they are obliged to fix the defect for free if the repair was done recently.