Why Xiaomi 8 Pro screens break down and when you need a replacement
The screen Xiaomi 8 Pro — one of the most vulnerable parts of the smartphone, despite the manufacturer’s stated protection of Gorilla Glass 5. Falling from a height of even 50-70 cm, hitting a hard surface or strong pressure (for example, if you sit on the phone in your pocket) often lead to cracks, broken pixels or complete failure of the sensor. In 80% of cases, such damage requires a complete replacement of the display module — repair matrix or glass layer separately is more expensive and less reliable.
The Xiaomi 8 Pro features a glued screen where the touchscreen, the matrix and the protective glass represent a single unit, which makes it easier to replace (no layers need to be disassembled), but increases its cost. For example, if only the sensor is damaged, you still have to change the entire module. Another common problem is "spots" or "bands on the screen after a fall that signal damage to the plume or display controller. In such cases, replacing the screen may not solve the problem, and a board diagnosis will be required.
Should Xiaomi be Repaired? 8 Pro in 2026 Considering that the model came out in 2018 In the year, the market price rarely exceeds 10-15 If the cost of replacing the screen is close to 50-70% It makes sense to consider buying a new device, but for many Xiaomi users, it is worth considering. 8 Pro remains relevant thanks to Snapdragon 845, 8 GB of RAM and AMOLED-screen – in this case, the repair is justified.
Factors Affecting the Cost of Screen Replacement
The price of replacing the Xiaomi 8 Pro display can vary by 2-3 times depending on several key factors. First, it is the type of screen: original (OEM) or non-original (copy). Original modules cost more, but guarantee full compatibility with the hardware of the smartphone, while cheap copies often have problems with color reproduction, brightness or sensor. Second, the repair site: official Xiaomi service centers charge 30-50% more than private workshops, but provide a warranty.
Other important points:
- 🔧 Difficulty of damage: crack only on glass will cost less than a broken matrix with a broken sensor.
- 📦 Additional work: if the front camera or speaker is affected by the fall, their replacement will increase the total amount of work.
- 🏙️ Region: in Moscow and St. Petersburg prices for 15-20% higher than in the regions.
- ⏳ Urgent: Express repairs for 1-2 could cost an hour 20-30% more expensive.
Also worth considering is the generation of the screen. For the Xiaomi 8 Pro, there are both old batches of original displays (cheaper but with an old resource) and new ones that are manufactured under license. The latter are more expensive but more reliable. Some workshops offer "premium copies" with improved color reproduction, but their quality is difficult to verify without testing.
Comparison of prices in official and informal services
Xiaomi’s official service centers use only original parts and provide a warranty up to the end of the day. 12 months, but their prices are rarely lower 8-12 For example, in Moscow Mi Service Center, the screen was replaced by Xiaomi 8 Pro's gonna cost you in 10 500 roubles (as of June) 2026 In the regions, the price may be lower by 10-15%, But we should not expect significant savings.
Private workshops offer more flexible conditions, where you can choose between the original screen (6,000-9,000 rubles) and a quality copy (3,500-5,500 rubles). However, it is important to check the reputation of the workshop: cheap screens often have problems with automatic brightness, sensor response or color balance.
| Type of service | Screen type | Cost (rupe) | Guarantee | Duration of repairs |
|---|---|---|---|---|
| Official Xiaomi service | Original (OEM) | 10 000–12 000 | 12 months | 3-5 days |
| Authorized partner | Original | 8 500–10 000 | 6–12 months | 2-4 days |
| Private workshop (premium) | Original | 6 000–8 000 | 3–6 months | 1-3 days |
| Private workshop | Copy (premium) | 4 500–6 000 | 1-3 months | 1-2 days |
| Private workshop | Copy (economy) | 3 000–4 500 | No, 1 month. | 1 day |
⚠️ Attention: Some workshops may offer "repair" screens instead of replacements, such as sealing cracks with a special film or polishing (1-2 months) and often degrade the sensor sensitivity. 8 Pro AMOLED-matrix such procedures are not recommended, as can damage organic LEDs.
Step-by-step: how to change the screen yourself
Self-replacement of the screen on Xiaomi 8 Pro is possible, but requires experience with electronics, specialized tools and patience. If you have never disassembled smartphones, it is better to contact the service - errors in dismantling can damage the plumes, battery or motherboard.
Buy a new display module (check compatibility with Xiaomi 8 Pro!)
Set of screwdrivers (cross, flat, Pentalobe)
Plastic blades or mediators for disassembly of the body
Hair dryer or thermo-air station for softening glue
Screen suction cup
Double-sided tape or glue to fix the new display
Tweezers and antistatic bracelet (optional)
-->
Step 1: Preparation and disassembly
Turn off the phone and remove it. SIM-Heat the edge of the screen with a hair dryer (temperature) ~60°C) during 2-3 Carefully apply a plastic blade to the display starting at the bottom edge, don't use metal tools, they can damage the case or plumes, as soon as there's a gap, insert a plastic card into it, and slowly lead along the perimeter, separating the screen.
Step 2. Turn off the plumes.
After removing the screen, you will see 2-3 plumes: the main (display + sensor) and additional (for example, for a fingerprint scanner). Carefully disconnect them with a plastic blade. Don't pull the plumes! - they are fragile and can come off the board. Photograph the location of the plumes so as not to confuse them with reverse assembly.
Step 3: Installation of a new screen
Move all the small details from the old one (for example, a metal frame, if any) to the new display. Connect the plumes in reverse order and check the screen performance until final fixation. If the image is available, but the sensor is not working, check the contact density of the plume. Secure the screen on a double-sided tape or glue (for example, B-7000).
What if the screen doesn’t work after replacement?
⚠️ Warning: If you replace it yourself, you lose the warranty (if it is still valid) and risk damaging other components, such as sloppy handling of the battery could cause it to bloat. If you are not sure about your skills, it is better to pay for repairs in the service than to get a broken phone.
Where to buy a screen for Xiaomi 8 Pro: proven sources
You can buy a display module for Xiaomi 8 Pro at sites like AliExpress, Avito or in specialized spare parts stores, but it is important to avoid low-quality counterfeits.
- ⭐ Rating not lower than 95% and reviews with photo / video installed screen.
- 📄 Certificates or warranties for goods (at least 3 months).
- 📦 Static electrical protection packaging (antistatic bags).
- 💬 Answers to questions about compatibility with a specific revision of the Xiaomi 8 Pro (for example, for a version with 6 or 8 GB of RAM).
Recommended areas for purchase:
- 🌍 AliExpress: Stores HWSIN Store, JMTRONICS Official Store (original and premium copies).
- 🛒 Specialized sites: Fixez.ru, Zapchasti-GSM.ru (original spare parts with warranty).
- 📱 Local groups in Telegram: often sell used original screens from disassembly.
- 🏬 Electronics stores: Svyaznoy, M. Video (sometimes available).
Average screen prices (June 2026):
- Original (OEM) – 5 000-7 000 rubles.
- Premium copy (with good color reproduction) - 3,500-5000 rubles.
- Economy-copy (possible problems with the sensor) – 2,500-3,500 rubles.
💡
Before buying a screen on AliExpress, check with the seller whether the module supports the Always On Display (AOD) function.
Frequent screen replacement problems and how to avoid them
Even after a professional screen replacement on the Xiaomi 8 Pro, there may be problems, and here are the most common ones and ways to prevent them:
1.The sensor or part of the screen is not working
The reason is: bad plume contact, damage to the flexible cable, or incompatibility of the screen, so the solution is to reconnect the plume, check the integrity of the contacts, and if the problem persists, maybe we need another display module.
2. Poor color reproduction or brightness
The reason: a cheap copy of the screen with a low-quality matrix, the solution: calibrate the colors in the settings (Settings → Screen → Color mode) or replace the screen with a better one.
3.The screen spontaneously presses or floats the sensor
The reason: the screen is misaligned (misfitting) or the touch layer is damaged. Solution: Reset the display, making sure it's tightly attached to the body.
4.The fingerprint scanner is not working.
The reason: when you change the screen, the scanner plume is damaged or the connector is not connected, the solution is to check the connection of the plume to the motherboard. If the scanner is built into the screen (as in some versions of the Xiaomi 8 Pro), you may need firmware.
5. The battery goes down fast.
The reason: the new screen consumes more power due to a poor matrix or improper calibration, the solution being to calibrate the battery (discharge to 0% and charge to 100% without interruption) or replace the screen with a more energy efficient one.
💡
If the phone stopped turning on after changing the screen, the motherboard or battery is likely damaged, in which case a diagnosis is required in the service - self-repair can exacerbate the problem.
Alternatives to screen replacement: when repairs are inappropriate
Replacing the screen with the Xiaomi 8 Pro isn't always justified.Consider alternatives if:
- 💸 The cost of repair exceeds 70% of the price of a used smartphone (for example, if the screen costs 8,000 rubles, and the phone itself can be bought for 12 000 rubles).
- 🔄 The phone has other critical issues: a broken camera, a faulty battery, or a damaged board.
- ⏳ You plan to upgrade your smartphone soon – in this case, it is easier to save on repairs.
- 🛠️ You do not have time to wait for repairs (in official services it can take up to 5 days).
What to do instead of replacing the screen:
- 📱 Sell the phone for spare parts: even with a broken screen Xiaomi 8 Pro can be profitable to pass (price – 3000-5 000 rubles).
- 🔄 Exchange for a new smartphone: some stores (for example, Messenger) accept old devices in the trade-in.
- 🛡️ Use protective glass: if cracks do not interfere with the work, the glass sticker will prevent further destruction.
- 🖥️ Connect your phone to an external monitor USB-C → HDMI Adapter and use as a mini PC.
If you still decide to replace the screen, but want to save money, consider buying a used Xiaomi 8 Pro with a working display and transferring components.