Replacement of the screen on Xiaomi Redmi Note 8 Pro: prices 2026, where cheaper and how not to run into fraud

Why does the Redmi Note 8 Pro screen break so often – and how much does it cost to fix it?

The Xiaomi Redmi Note 8 Pro screen is one of the most vulnerable parts of this smartphone. Despite the protection of the Gorilla Glass 5, falls from a height of 1-1.5 meters often end in cracks, "web" or complete sensor failure. The reason is not only the brittleness of the glass, but also in the design: thin body and lack of shock absorbing inserts between the display and the metal frame. Even a slight impact on the corner can lead to rupture of plumes or damage to the matrix.

The cost of screen replacement varies from 3500 before 12000 The price range is huge, not just in the region or the status of the service center, but also in the type of matrix being installed. 2-3 It is more expensive than analogues, but it guarantees the preservation of all functions: Always-on Display, the correct operation of the light sensor and the absence of "yellowness" after replacement. In this article, we will discuss where it is more profitable to repair, how to distinguish a fake from the original and why cheap repairs can turn into new problems.

Important: if after a fall, the smartphone does not turn on or the screen flashes / flickers, the problem may not be in the display, but in damage to the motherboard or disconnection of connectors. In such cases, diagnosis in the service is mandatory - self-disassembly without experience is fraught with the final failure of the device.

Official service vs. informal workshops: where is cheaper and more reliable?

Prices in authorized service centers Xiaomi (for example, Mi Service) start from 8000 rubles for the replacement of the screen with the original matrix.

• 🔧 Guarantee 6-12 months at work and parts
• 📋 Only certified components are used.
• 🛡️ Factory tightness is maintained (IP53)
• 📝 Official check for guarantee obligations

However, there are pitfalls: the line for repairs can stretch on the 1-2 In some cities, there are no official centers. 3500 RUB, but here the risks are higher:

• ⚠️ 70% of cheap matrices are fakes to the original (often with marriage backlights)
• ⚠️ There is no guarantee of maintaining the functions HDR and DC Dimming
• ⚠️ Possible problems with color calibration after replacement

Compromise option – certified partners Xiaomi (not to be confused with official SC!) They work with original parts, but the prices are lower by 15-20%. For example, in Moscow, the replacement will cost 6500-7000 rubles against 8500 in Mi Service.

How much does the original matrix cost – and how not to buy a fake?

Original matrix for Redmi Note 8 Pro (article) MDY10-EG) retailer 5000-6000 But the market is full of fakes that are sold as "original" at a price. 2500-3500₽. Here's how to distinguish the real detail:

If you order the matrix yourself (for example, on AliExpress or Avito), pay attention to reviews about the seller "OEM-Clones are non-original parts manufactured in the same factory as the originals, but without Xiaomi’s quality control. They can last a year or two, but there is no guarantee that all features will be preserved.

💡

Before buying a matrix, check it for performance with a multimeter. Connect the plumes to the test controller (worth it). ~500₽) Make sure there are no broken pixels or backlight defects.

Step-by-step: how to replace the screen yourself

If you decide to repair yourself, prepare the following tools:

Suction cup (∅5-7 centimeter)|Plastic mediators (0.15-0.3 mm)|Screwdriver. T3 and T5 (magnetic)|Tweezers with curved ends|A hair dryer or a thermo-air station (t)=80-100°C)|Double-sided tape or glue B7000-->

The replacement process takes 1.5-2 hours. Follow the algorithm:

1. Turn off the power and remove SIM-Heat the edge of the screen around the perimeter with a hair dryer (do not direct the air flow to the battery!).
2. Put a suction cup on the screen and carefully separate it with a mediator, so the key is not to damage the plumes of the display and the sensor.
3. Unscrew the 6 screws that hold the metal plate over the plumes. Unplug the connectors with tweezers.
4. Remove the old matrix and clear the frame of the glue residue. Apply a new adhesive (e.g., B7000) to the new matrix.
5. Connect the plumes to the new array, lock the plate and press the screen.

Critical Beginners error: Incorrect connection of the sensor plume. If after assembly the screen works, but the touches do not register, check the FPC-40P connector (it is on the right of the main display plume), often connected "upside down" - this leads to a broken touch.

Hidden costs: What else might require a replacement?

When changing the screen, the masters often find additional problems that increase the final cost of repairs.

• 🔋 Bloated battery (replacement) +1500-2500₽). If the battery is deformed, it must be replaced, otherwise the new screen may be damaged due to pressure.
• 📶 Damaged antenna module (repair) +1000-2000₽). Often suffers from blows to the upper part of the body.
• 🔌 Disconnected charging contacts (soldier) +800-1500₽). Manifested as unstable charging or complete lack of response to the cable.
• 🎛️ Broken Volume/Power buttons (replacement) +500-1200₽ They're easy to damage when they're disassembled.

To avoid unexpected expenses, before repairs, ask the master to conduct a full diagnosis (it is worth it). 300-500₽). It includes a check:

• Integrity of the motherboard (for microcracks)
• Operational capacity of all sensors (gyroscope, accelerometer, compass)
• Type-C connector states (often oxidized after moisture is ingested)

💡

If the wizard refuses to show the removed matrix or does not provide a check for spare parts, this is a reason to doubt the integrity of the service. Original parts always have a series and markings that can be checked with the Xiaomi database.

Where to buy spare parts for Redmi Note 8 Pro: verified sellers

If you’re choosing to replace your screen yourself or want to monitor the quality of your parts, here are reliable sources:

When buying a used matrix, be sure to specify:

1. Reason for replacement (if the previous screen was beating, the plume could have suffered).
2. Term of use (matrixes older than 2 years often have burnt pixels).
3. A receipt or photo of a performance test.

- Sensor operation (swipe your finger across the screen in drawing mode).

No broken pixels (clean white/black screen)

- Correct operation of autobrightness (to point the camera at the light source).-->

Frequent Screen Replacement Errors – and How to Avoid Them

Even after a successful screen replacement, users face problems, and here are the most common ways to fix them:

• 🔄 The screen spontaneously rotates → Reset the gyroscope calibration in Settings → System system → Additionally. → Sensor reset.
• 🌡️ Autobrightness is not working. → Check the connection of the light sensor plume (it is located next to the front camera).
• 🎨 The colors have become dull or greenish → Set the sRGB color profile in the screen settings or manually calibrate it with ##3644##.
• 🔋 The battery goes down fast. → After changing the screen, reset the battery statistics: Settings → Battery → Three points. → Optimization → Reset.

If after the replacement there are "dead zones" on the sensor (does not respond to touch), the problem may be:

• Bad contact sensor plume (reconnect).
• Damage to the sensor layer itself (replacement of the matrix is needed).
• Incompatibility of the firmware with the new matrix (update the software to the latest version of MIUI).

⚠️ Warning: If the screen starts to warm up more than usual after replacing, immediately turn off the smartphone! This is a sign of short circuit in the plumes or damage to the backlight controller.

FAQ: Answers to Frequent Questions About Replacing the Redmi Note 8 Pro