Renovation of the screen Xiaomi Redmi 9A: cost, timing and where to fix in 2026

How much does it cost to fix the Xiaomi Redmi 9A screen today?

A broken screen on the Xiaomi Redmi 9A is one of the most common problems for owners of this budget smartphone. Falling from a height, hitting or even a bad press can lead to cracks, broken pixels or complete sensor failure. But how much will you have to pay for repairs? Prices range from 1,500 to 6,000 rubles depending on the type of breakage, quality of parts and place of repair.

In this article, we will discuss:

• 🔧 Average prices in service centers and private workshops
• 🔍 How to distinguish the original display from a fake
• ⏳ Timelines for repairs and guarantees
• 💡 Ways to save money without risking your phone

Important: The Redmi 9A is the 2020 model, but parts are still widely available. However, the original displays are getting smaller and prices are rising every year. If your phone falls and doesn't respond to touch, don't rush to buy a new one, repairs are often cheaper than buying a used one.

Private workshops vs. private workshops: where is cheaper?

The first question that arises from owners of Redmi 9A with a broken screen: contact the official Xiaomi service or look for a private workshop? The price difference can reach 30-50%, but there are nuances.

Xiaomi’s official service centers use original parts and give a warranty of up to 12 months, but the cost of repairs is higher here – from 4,500 to 6000 rubles for replacing the display module, plus in some cities, queues for repairs stretch for 5-7 days.

Private workshops offer prices from 1,800 to 3,500 rubles, but here the risks are higher:

• 🔄 Can be installed non-original display with the worst color reproduction
• ⏱ The guarantee is often limited. 1-3 months or not at all
• 🛠 The build quality depends on the experience of the master - there may be problems with the sensor or backlight

⚠️ Some workshops offer "budget" repairs with the installation of a display from Redmi 9C These screens may not display colors correctly or have problems with autobrightness. Always specify which module will be installed!

Cost of repair depending on the type of breakdown

The price of a Redmi 9A screen repair depends not only on the location of the repair, but also on the nature of the damage.

If only the protective glass is damaged (without damage to the matrix), some workshops offer to replace it separately - it will cost 800-1 500 rubles. However, for the Redmi 9A, such repair is rare, since the display module is usually changed entirely.

💡

Before repairing, check if the sensor is working in Fastboot mode. To do this, connect the phone to the PC and try to control it through ADB. If the sensor responds to commands, the problem may be in the firmware, not in the screen itself.

How to save on screen repair: 5 proven ways

Replacing the display with a Redmi 9A isn't always expensive, but here are a few ways to reduce the final amount:

• 🔍 Compare prices in 3-5 workshops, the difference can reach 1,000-1 500 rubles even in one city.
• 📦 Buy the display yourself (on AliExpress or at local parts stores) and give it to the master only for installation%.
• 🛠 Look for stocks. Many services offer discounts on repairs when you present a check to buy a phone.
• 🔄 Consider a used display, and some workshops offer work screens from donor phones at 20 to 40 percent lower prices.
• 📱 If the phone is warranty-free and the screen is the fault of the manufacturer (for example, due to a factory defect), repairs can be free.

Beware of too low prices, which may mean that the master uses poor-quality parts or saves on glue/sealants. For example, if you are offered to replace the screen for 1,200 rubles, there is a high risk that in a month it will fall off or the sensor will stop working.

Check if the display will be original |Ask for a warranty for work and spare parts |Check reviews about the workshop |Make sure that after repairs will keep the seals (if the phone is warranty) |Phoot the IMEI phone before repairs-->

Replacing the screen: Is it worth the risk?

Replacing the Redmi 9A display at home is possible, but requires experience and special tools. If you have never disassembled smartphones, it is better not to risk - an error can damage the motherboard or other components.

For self-repair, you will need:

• 🔧 Set of screwdrivers (star, cross, flat)
• 🧲 Screen suction cup
• 🔥 Dryer or infrared station for softening glue
• 📱 New display module (cost from 1,200 to 2,500 rubles)
• 🧴 Clay. B-7000 or double-sided tape for fixation

The average repair time for beginners is 2-3 hours.

• 💥 Damage to battery plume or camera
• 🔋 Unplugged battery (can lead to bloating)
• 📶 Loss of antenna signal (if the body is not assembled correctly)

⚠️ Warning: If you replace your screen yourself, you lose your warranty (if it's still valid) and risk losing your work phone. 9A — Your main machine, it is better to entrust the repair to professionals.

Where to buy parts for Redmi 9A: a review of proven sources

If you decide to buy a display yourself, it is important to choose a reliable seller. 9A:

When buying on AliExpress, pay attention to the seller's rating and reviews.The best stores for Xiaomi parts:

• 🏆 Xiaomi Mi Store Official (official store)
• 🛒 HWK Shop (good reviews on displays)
• 🔧 Repair Parts Store (specialized in parts)

Before buying, check with the seller:

• 📋 This is the original display or copy?
• 🔄 Is there a possibility of a return if the detail does not fit?
• 📦 It comes with glue and tools?

💡

When buying a display on AliExpress, choose options marked "Original" or "OEM." Avoid cheap "Copy" modules - they often have poor color reproduction and quickly fail.

Frequent Errors in Redmi 9A Screen Repairs and How to Avoid Them

Even in professional workshops, sometimes mistakes are made that lead to re-repair, and here are the most common problems and how to prevent them:

• 🔌 Badly soldered plume → The screen flickers or periodically turns off. Solution: Check the soldering quality and the reliability of the connector attachment.
• 🎨 Poor-quality glue → The display moves around the edges, dust gets in. Solution: Use specialized glue. B-7000 or LOCA.
• 📶 Damage to antenna contacts → Poorly catches the network or Wi-Fi. Solution: Carefully assemble the case without touching metal contacts.
• 🔋 Unstuck battery → The phone discharges quickly or doesn't turn on.Solution: When disassembling, use plastic blades to avoid damaging the battery.

If after repair you notice at least one of these problems, immediately contact the workshop - under guarantee they are obliged to eliminate the defect for free.

Another common complaint after changing the screen is poor sensor performance (delays, false touches).

• Incorrect calibration (you need to reset the settings in Settings → System → Reset settings).
• Bad contact of the plume (reconnection is required).
• Low quality touchscreen (only replacing the original will help).

FAQ: Answers to popular questions about Redmi 9A screen repair