What bolts are needed to fasten the Xiaomi TV: a complete guide to choosing and installing

Mounting a Xiaomi TV against a wall or bracket is a task that requires precision. Mistaking the choice of bolts can lead to a fall in equipment, damage to the panel or even injuries, especially for models with large diagonals (55-75 inches), where the weight exceeds 15-20 kg.

In this article, we will discuss all the nuances: from standards VESA And the bolt sizes, to the threads and materials, and you'll know which fasteners are suitable for Mi. TV 4S, Mi TV Q1, Redmi Smart TV Other popular series, and how to avoid typical editing errors.

Important: the information in the article is relevant for all Xiaomi TVs released after 2018. For legacy models (up to 2017) VESA They may differ – specify them in the documentation for a particular model.

1. Standard. VESA: What it is and how to determine your Xiaomi TV

Standard VESA (Video Electronics Standards Association defines the distance between the mounting holes on the back of the TV:

Most Xiaomi models support the standard VESA 200×200 mm (for diagonals) 32–55 inch VESA 400×400 mm (for) 65–75 Exceptions are the compact Mi series models. TV 4A (32–43 inch), where it can be used VESA 100×100 mm.

To determine the standard of your TV:

1. Turn the TV downward (preferably on a soft surface).
2. Measure the distance between the centers of the extreme holes horizontally and vertically.
3. Compare it to the table below.

Critical detail: the TV Xiaomi Mi TV 5 Pro (55-65 inches) bolt holes can have a non-standard depth - up to 25 mm. Use bolts with a thread length of no more than 20 mm, so as not to damage the internal components.

2. Types of bolts for mounting: which are suitable for Xiaomi

Xiaomi TVs are mounted with a six-sided (turnkey) or cross-shaped slit.

• 🔧 Carving: metric (designation begins with the letter M). M4, M6, M8.
• 📏 Length: from 10 to 30 mm. Optimally - 5-10 mm longer than the thickness of the bracket.
• 🔩 Head type: hexagon (turnkey 10–13 mm) or cross (Phillips) PH2).
• 🛠️ Material: galvanized steel or stainless steel (for wet rooms).

Examples of bolts for popular models:

• 📺 Mi TV 4S 55": M6×16 mm (hexagon).
• 📺 Redmi Smart TV 70": M8×25 mm (with the puck).
• 📺 Mi TV Q1 55": M6×20 mm (cruciform slitz).

⚠️ Warning: Do not use full-rotted bolts (where the coils go to the head) they can damage the plastic inserts inside the holes The optimal option is partial-rotted bolts (smooth area at the head).

💡

Before buying bolts, check the complete set of your bracket - some models (for example, Xiaomi Mi). TV Wall Mount already includes suitable fasteners.

3. How to choose bolts by diameter and length

The diameter of the bolt depends on the size of the holes in the TV.

• M4 — models up to 43 inches (e.g. Mi) TV 4A 32").
• M6 — for 48-55 inches (Mi) TV 4S, Redmi Smart TV X).
• M8 — for 65-75 inches (Mi) TV 5 Pro, Mi TV Q2).

The length of the bolt is calculated by the formula: The thickness of the bracket + 5-10 mm of stock (but no more than 25 mm for most models).

Example: if the bracket is thick 12 Um, get the bolts. M6×20 mm.

⚠️ Warning: Too long bolts (over 30 mm) can get stuck in the TV's internal components, damaging the board or backlight. TV 5 and Q1 critical depth of holes – do not exceed the recommended length!

Clarify the standard VESA forecast|Measure the thickness of the bracket|Choose partial threaded bolts|Check material (galvanizing/stainless steel)|Buying the washers (if not included)-->

4. Step-by-step instructions: how to fix a Xiaomi TV on the wall

For installation you will need:

• 🔨 Drill with a drill on concrete (if the wall is brick / concrete).
• 📏 Level (laser or bubble).
• 🔧 Key set or screwdriver PH2.
• ⚡ Dowels and screws for bracket (usually come complete).

Step 1 - Marking the wall

1. Apply the bracket to the wall and mark the dowel space with a pencil.
2. Check the level – the TV should hang strictly horizontally.
3. Make sure there is no hidden wiring in the drilling area (use a metal detector).

Step 2: Holding the bracket together

1. Drill holes and insert dowels.
2. Fix the bracket with screws (the moment of tightening is 15-20 N·m).

Step 3: Installation of the TV

1. Attach it. VESA-The back of the TV (if included).
2. Carefully hang the TV on the bracket and fix with bolts.
3. Tighten the cross-cross bolts to avoid skewing.

⚠️ Warning: Don't pull the bolts over, it can deform the metal frame of the TV. M6 — 4-6 Nm, for M8 — 8-10 Nm.

5 Frequent attachment errors and how to avoid them

Even the most experienced users make mistakes that can cause the TV to crash.

Mistake 1: Wrong selection of bolts by length

Too short bolts will not provide reliable fixation, and too long will damage the internal components. Always check the documentation for the TV or use the table above.

Mistake 2: Ignoring the weight of the TV

The bracket should be 1.5-2 times more than the weight of the TV. TV Q1 65" (weight) ~25 kg) need a bracket with a reserve of up to 50 kg.

Error 3: Fixing to drywall without reinforcement

Drywall can't bear the weight of a TV.

• 🛠️ Special butterfly dowels for GCL.
• 🏗️ Reinforce the wall with a wooden beam behind drywall.
• 🔧 Bracket with load distribution on several points.

Mistake 4: Lack of safety rope

Even with proper installation, it is recommended to use a safety cable (especially for TVs from 55 inches) that will hold the TV in case of accidental fall (for example, if the bracket deforms over time).

💡

Always check the mounting 2-3 days after installation – bolts may weaken due to vibrations or wall shrinkage.

6.Where to buy bolts for Xiaomi TV: tested

The mounting bolts can be purchased:

• 🏪 Fastening stores: "Leroy Merlin", "OBI", "220 Volts" (there are specialized sets for TV).
• 🛒 Online sites: Wildberries, Ozon, AliExpress (search on request "bolts" VESA M6 television-wire»).
• 🔧 Xiaomi Service Centers: Sometimes they sell original kits (for example, for Mi) TV 5 Pro).

Average cost:

• Set out 4 bolt M6×20 mm: 150–300 ₽.
• Set with washers and dowels: 400-600 ₽.
• Insurance cable: 200-500 ₽.

⚠️ Warning: Avoid cheap soft metal bolts (such as silumin) that can break when you puff up or under the weight of a TV, with 8.8 or 10.9 bolts being the best choice.

7. Alternative fastening methods (without bolts)

If for some reason the bolts cannot be used (e.g., the thread in the holes is ripped off), consider alternatives:

1. Clamp brackets

Some models of brackets (for example, Sanus) VLT6-B1) They're not bolts, they're flaps on the sides, and they're suitable for TVs up to 30 kg.

Universal adapters VESA

Adapters (e.g., adapters, VESA Extender) allow you to shift the mounting points if the holes on the TV do not match the bracket standard.

Wall anchorages without drilling

For rented housing or drywall walls, vacuum suction brackets (up to 20 kg) or tension cables (up to 50 kg) are suitable, but this is a temporary solution - reliability is lower than that of bolt mounting.

💡

If you rent a house and can't drill walls, consider floor racks for TVs. They don't require mounting and are suitable for Xiaomi models up to 65 inches.

FAQ: Answers to Frequent Questions