How to pour water into a vacuum cleaner Xiaomi: instructions for all models with aquafilter

Xiaomi cleaners are not just cleaning techniques, but real assistants in the fight against dust, dirt and allergens. However, many users face difficulties when using them for the first time: how to pour water properly so as not to damage the device? This procedure seems simple, but errors here are fraught with leaks, breakdowns or inefficient work. 2C, Dreame W10, Viomi V3 etc.) the process may be different - and we will analyze all the nuances.

In this article you will find not only step-by-step instructions with the photo, but also a table of fluid compatibility, a list of common errors (which 70% of beginners encounter), as well as answers to questions about whether it is possible to use a soap solution or how to avoid unpleasant odor. If your vacuum cleaner has stopped spraying water or gives an error E3 — There's a solution here, too.

Before you start, check that you have distilled or boiled water (filtered water at most), a clean cloth and model instruction, and do not use tap water, which is the main cause of plaque and blockages in the system.

1.What Xiaomi models support the function of floor washing?

Not all Xiaomi vacuum cleaners are equipped with aquafilter or wet cleaning system, and below is a list of popular models with support for the function where water pouring is required:

• 🔹 Xiaomi Mi Robot Vacuum-Mop 2C/2Pro/2Ultra — compact robots with a water tank (volume) 200–300 millimeter).
• 🔹 Dreame W10 / W20 / H12 — vertical vacuum cleaners with steam cleaning function (tank 0.5-1 l).
• 🔹 Viomi V2 / V3 / SE — Robot vacuum cleaners with electrical spraying system and automatic water dosing.
• 🔹 Xiaomi SCM-S1 — cleaner for manual cleaning (capacity 0.8 l).

If your model is not listed, check the specifications on the official website or in the Mi Home app. for example, Xiaomi Mi Robot Vacuum 1S does not support wet cleaning - pouring water into it will lead to breakage.

⚠️ The Mi Vacuum Cleaner Series G10 or dreame V11 They have a removable aquafilter, but it's only designed to filter air, not to wash floors!

To determine exactly if your appliance is suitable for wet cleaning, pay attention to:

• 📦 A separate water tank (usually transparent or blue marked).
• 💧 Badge "drop" on the body or in the instructions.
• 📱 The "Mopping" function in the Mi Home app.

2. What water can be poured: requirements and prohibitions

Not only does the cleaning process depend on the quality of the water, but the life of the vacuum cleaner as well. Xiaomi recommends distilled water, which does not leave a plaque on the heating elements or clog the sprayers, but boiled (chilled) or bottled water with minimal salt content will also work.

Which is strictly forbidden:

• 🚫 Tap water - contains chlorine, iron and other impurities that settle on the TEN and tubes.
• 🚫 Mineral water (even still) - due to high hardness.
• 🚫 Soap solutions or detergents (except special ones for vacuum cleaners Xiaomi).
• 🚫 Hot water – can warp plastic tank parts.

Exception: for Dreame models W10 viomi V3 It is allowed to use special detergents Xiaomi Floor Cleaner (article) DJ.CLEAN.001), But not more than 10 ml per 1 liter of water, and overdose will lead to excessive foaming and error. E5.

⚠️ Warning: If you use tap water, be sure to wash the tank and vacuum tubes with vinegar solution (1:1 with water) once a month. Otherwise, after 3-6 months, the sprayers will become clogged with plaque and they will have to be cleaned manually.

💡

To remove lime plaque in the tank, pour a solution of citric acid (2 tbsp. spoons per 1 liter of water), turn on the vacuum cleaner for 5 minutes in washing mode, then rinse with clean water.

3. Step-by-step instruction: how to pour water into a vacuum cleaner

The process of filling the water depends on the type of vacuum cleaner: vertical (manual) or robot. Below is a universal instruction, taking into account the features of popular models.

For Robot Vacuum-Mop (Mi Robot Vacuum-Mop) 2C, Viomi V3):

1. Turn off the vacuum cleaner and remove the water tank (usually located behind or below).
2. Remove the tank lid, wash it under running water (if this is not the first use).
3. Pour water to the mark MAX (usually 200-300 ml. Do not exceed the level!
4. Install the tank back, making sure it is tightly latched (a characteristic click should be heard).
5. Turn on the vacuum cleaner and select wash mode in the Mi Home (Cleaning Mode) app. → Mopping).

For vertical vacuum cleaners (Dreame) W10, Xiaomi SCM-S1):

1. Disconnect the hose or wash nozzle (if it is removable).
2. Find a water tank – it can be in the handle or at the base of the vacuum cleaner.
3. Unscrew the lid counterclockwise and pour water to the mark (usually 0.5-1 liters).
4. Close the lid and make sure the sealing ring is not skewed.
5. Connect the wash nozzle and select Steam or Wet Cleaning mode.

For models with electronic water flow control (e.g. Viomi) V3) After refueling, you may need to reset the meter:

1. Hold the power button for 5 seconds.


2. Go to Settings → Reset Water Tank in the app.

Make sure the vacuum cleaner is off.|Check the integrity of the sealing rings|Use only recommended water|Not exceeding the level MAX tank-house|Secure the tank before you click.-->

4 Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when refilling water.-5 problems and solutions:

• 💦 If you pour it above the mark, MAX, The liquid can get into electronic components, causing an error. E1 (Solution: immediately pour out the excess and dry the vacuum cleaner for 24 hours.
• 🔌 A loosely closed tank leads to leaks and errors. E4 (Solution: check the sealing ring, it may have dried or deformed.
• 🧼 Using detergents, the foam will clog the filters, and the vacuum cleaner will spit with water. Solution: rinse the system with clean water 3-5 times.
• ❄️ Cold water in steam mode. In models with heating (for example, Dreame). W10) Solution: Use room temperature water (20-25)°C).
• 🔋 Pouring water with the power plug. Short circuit risk. Solution: always remove the plug from the socket before filling.

If the vacuum cleaner does not spray water after filling, check:

1. Air in the system (shake the tank to blow the plug).
2. Clogging of the sprayers (clean with a needle).
3. Correct installation of the nozzle for washing.

⚠️ Warning: If you have water left in the tank after cleaning, don't leave it for long, it will lead to bacteria and an unpleasant smell!

5. How to care for the water tank?

Regular care extends the life of the vacuum cleaner and prevents breakdowns.

• 🧽 After each cleaning: drain the remaining water, wash the tank with warm water and dry it in the air (not in direct sunlight!).
• 🧴 Once a week: disinfect the tank with a weak solution of vinegar (1:3 with water) or special cleaning tablets (Xiaomi Cleaning Tablets).
• 🔍 Once a month: check the condition of the sealing rings - if they crack, replace (Dreame article) W10 — DR.SEAL.002).
• ❄️ Every 3 months: Clean the sprayers from plaque with a toothpick or compressed air.

For models with self-cleaning system (e.g. Viomi) V3) Just run the Tank Cleaning function in the app every 2 weeks. The vacuum cleaner will automatically wash the tubes with clean water.

💡

Using hard water reduces the life of a vacuum cleaner by 30 to 40 percent. Distilled water is cheaper than repair!

6. Can detergents be used?

Xiaomi allows the use of branded detergents from the line Xiaomi Floor Cleaner or Dreame Detergent. they have a neutral pH and do not form foams that are dangerous to electronics.

• 🧴 Special tablets (e.g. Xiaomi Cleaning Tablets) – dissolve in water, suitable for all models.
• 🍋 Citric acid (1 h.spoon per 1 liter of water) - only to clean the system from plaque, not for regular cleaning!
• 🧼 Baby soap (without fragrances) - in extreme cases, but not more than 5 ml per 1 liter of water.

What can't be added:

• 🚫 The means for washing dishes (Fairy, AOS) — foaming.
• 🚫 Bleachers or chlorinated liquids – corrodes plastic and rubber seals.
• 🚫 Vinegar in its pure form - can damage metal parts.

If you still used the wrong tool and the vacuum cleaner began to "spit" foam:

1. Turn off the device immediately.
2. Pour the solution and rinse the tank with clean water 3-5 times.
3. Clean the sprayers with compressed air.
4. Leave the vacuum cleaner to dry for 12 hours.

💡

To flavor the water when cleaning, add 1-2 drops of essential oil (lavender or tea tree) to the tank. This is safe and will give a pleasant smell to the room.

7. Frequent questions and problem-solving

We have collected answers to the most popular questions of users of Xiaomi vacuum cleaners with the wash function.

8 Conclusion: Short checklist before cleaning

To avoid mistakes and extend the life of your Xiaomi vacuum cleaner, follow this algorithm:

Use only distilled or boiled water|Check the integrity of the sealing rings|Do not exceed the mark MAX tank-house|Make sure the tank is tightly closed (click!)|Select the correct mode in the application (Mopping/Steam)|After cleaning, drain the water and dry the tank-->

If you are using a cleaning vacuum cleaner for the first time, start with a test cleaning on a small area of the floor, which will help to assess the intensity of the spraying and adjust the settings in the application if necessary.

Remember, properly caring for the tank and using the recommended water will save you time and money for repairs, and if you have problems, most of them are solved by flushing the system or replacing seals.