How to get a tray out for SIM-maps in Xiaomi Redmi 9A: 3 proven methods + frequent

Xiaomi Redmi Smartphone 9A It's one of the most popular budget devices of the brand, because it's both reliable and simple, but even with something as simple as taking out the tray. SIM-And the problem is that people are afraid to break the mechanism, they can't find the hole for the paper clip, and some people just don't know which side to push, and this guide will help you understand everything from tool preparation to emergency situations.

Unlike the flagship models, where the tray can be extracted almost effortlessly, the Redmi 9A The fixing mechanism is more rigid. It's made for reliability, but it requires precision. SIM-It takes less than a minute if you know all the details, and we'll also tell you what to do if the tray is jammed or the paper clip breaks inside the hole.

In this article you will find:

• 🔧 Step-by-step instructions with photos and videos (for visual perception)
• ⚠️ Typical errors that lead to a tray breakage or damage to the body
• 🛠️ Alternative ways to extract if there is no paper clip at hand
• 📱 Answers to frequent questions: is it possible to pull out the tray without tools, what to do when jamming, etc.

1.Preparation: What will be needed to remove the tray

Before you start removing the tray, make sure you have everything you need. 90% of the time, a standard paper clip is enough, but sometimes you may need additional tools.

The main tool is a paper clip for SIM-cards (or any other thin metal object) complete with Redmi 9A She's not coming, but she's okay:

• 📎 Buy in communication salons or electronics stores (costs 20-50 rubles)
• 🖇️ Make yourself from the stationery clip (unwind it so that a straight end is 3-4 cm long)
• 🔩 Replace with a thin sewing needle, pin or unbended stapler bracket (at last)

Also prepare:

• 📱 A flat surface (table, window sill) so as not to drop the smartphone
• 🔦 Good lighting – the hole to extract the tray is small and easy to miss in the dark
• 🧲 Magnet (optional) – will help if the paper clip falls inside the body

⚠️ Warning: Never use toothpicks, matches or plastic items to retrieve a tray. They can break inside the hole, and it will be extremely difficult to get the debris out. Metal is the only safe material.

2. Where is the tray for SIM-maps 9A

At Xiaomi Redmi 9A squash SIM-The map is located on the left end of the case (when viewed from the front of the screen), which is a standard place for most Xiaomi smartphones, but some users confuse it with a microphone hole or speaker.

To avoid making a mistake, focus on such signs:

• 📍 The hole is about on 1/3 hull height from the lower edge
• 🔍 It is slightly sunk in the body and has a metal rim.
• 📏 Distance from the hole to the volume button - about 1-1.5 cm

If you are still in doubt, look at the case of the smartphone in bright light: next to the hole for the paper clip usually there is a barely noticeable arrow or dotted line indicating the direction of extraction.

Important: at Redmi 9A Hybrid tray – it supports either 2 nano-SIM or 1 nano-SIM + MicroSD card at the same time set 2 SIM-cards and flash drives are not allowed.

3. Step-by-step instruction: how to pull out the tray in 30 seconds

Now, to the process itself, follow the instructions carefully so that you don't damage the locking mechanism.

1. Turn off your smartphone.This is not necessary, but it is recommended to avoid accidental screen taps or malfunctions. SIM-If the phone is dead, you can skip this step.
2. Put the paperclip in the hole. Hold the smartphone with your left hand (screen to you), and insert the paperclip in the hole on the left end with your right hand. Press with moderate force, you should feel a slight resistance, and then click.
3. Take out the tray. After clicking, the tray will extend 1-2 mm. Carefully pull it with your fingers or tweezers (if your nails are short). Don't put too much effort into it - the tray should come out smoothly.

If the tray is not extended:

• 🔄 Check if you pressed the paperclip correctly (it should rest on the internal mechanism, not slide past)
• 🔧 Try to shake the paperclip slightly left-right without removing it from the hole.
• 💡 Light the hole with a flashlight – it may be dust or dirt inside

4. Alternative methods if there is no paper clip

Sometimes there's no paper clip or needle at hand, and you can use the tools you can use, but with caution.

Method 1: Paper clip

If you have a paper clip, but it's too thick, try bent it so that the end becomes thinner. Alternatively, use a paper clip for money (the one in your wallets), as long as the end is flat and has no barbs.

Method 2: Ear wand (in extreme cases)

If there's nothing else, you can try a plastic ear wand, but you have to break it down so that it has a thin, strong tip, and the risk here is that the plastic can break off inside the hole, and only use this method if other options are not available.

Method 3: Dental floss or fishing line

It's a non-standard, but it works. Take a 10- to 15-cm piece of dental floss, fold it in half, and put it in the clip hole, and then pull the floss to the sides, simulating a push, and the mechanism will work, and the tray will move out.

⚠️ Attention: If you use non-standard tools (brush, sticks), do not press too hard - this can bend the internal mechanism of the tray.

💡

If the paperclip is constantly slipping out of the hole, wrap its tip in a thin layer of insulating tape, which will increase friction and help you get into the mechanism more accurately.

5. Common Mistakes and How to Avoid Them

Even a simple act like taking the tray out can be a problem if you do it wrong, and here are some of the most common mistakes and their consequences:

Mistake 1: Pressing too hard

Many users are afraid that the tray will not come out, and they are pressing the paper clip with all their might.

• 🔧 Bend the metal lock inside the body
• 💥 Breaking a plastic tray (it's fragile)
• 🔋 Damage contacts SIM-cards (if the tray goes too sharply)

Mistake 2: Using the wrong tools

Toothpicks, matches, plastic forks, all of these things can break down inside the hole, it's almost impossible to get the debris out without disassembling the case, and if there's no paper clip, you'd better go to the nearest electronics store than risk it.

Error 3: Removing the tray when the phone is turned on

This is not critical, but it can lead to:

• 📵 Temporary loss of network (if) SIM-card is taken out during the call)
• 🔄 Automatic reboot (rarely, but happens when the modem fails)
• 📲 Loss of unsaved data in applications using mobile Internet

Error 4: Incorrectly installing the tray back

If you insert the tray crooked or not to the end, it can:

• 🚫 Not fixed (will fall out when shaking)
• 📶 Not to contact with SIM-map (no network)
• 🔌 Damage contacts inside the smartphone (with frequent careless inserts)

6.What to do if the tray is jammed

Sometimes the tray stops moving even when you press it right, and the causes can be anything from dust to mechanical damage.

Reason 1: Dust or dirt in the machine

If the smartphone was often carried in a pocket or bag without a case, dirt could get into the clip hole.

1. Blow the hole with compressed air (a canister for cleaning equipment).
2. Carefully clean it with a thin needle soaked in alcohol.
3. Try pressing the paperclip again.

Reason 2: The tray is inserted crooked

If the last time you put the tray in, it was not fully inserted or at an angle, it could jam.

• 🔧 Try to slightly press the tray with your finger inside the body, simultaneously pressing the paper clip.
• 🔄 Swing the smartphone in your hands - sometimes the tray moves from a dead point.

Reason 3: Mechanical damage

If the smartphone fell or was pressed, the tray's locker might bend.

• 🛠️ Contact the service center (self-repairing can aggravate the problem).
• 📱 If the warranty is valid, do not try to disassemble the phone yourself - this will void the warranty.

⚠️ Attention: If a paper clip breaks inside the hole, don't try to get it with tweezers or a magnet - you can push the fragment deeper.

💡

If the tray does not come out after 3-4 attempts, stop trying and consult a specialist.

7. How to properly insert the tray back

Removing the tray is half the job, and it's equally important to properly install it back to avoid network problems or mechanical breakdowns.

Step 1: Check it out SIM-map

Make sure that:

• 📱 SIM-The card is trimmed to nano-SIM size (in Redmi). 9A Micro-SIM or standard SIM are not supported)
• 🔍 The bevel on the map coincides with the bevel on the tray (usually it is in the upper right corner)
• 🧹 There are no dust or scratches on the contacts (wipe them with a dry cloth if necessary)

Step 2: Insert the tray

Carefully place the tray in the groove and press it until you click it, there should be no gaps or backlash.

• Check if it's skewed. SIM-map.
• Make sure you don’t confuse the sides (the tray is inserted in only one position).

Step 3: Check the work

After installation:

• 📶 Turn on your smartphone and check the network level.
• 📞 Try to make a call or send a message. SMS.
• 🌐 Make sure that the mobile internet is working (if it is connected).

If the network does not appear:

• 🔄 Reboot your smartphone.
• 📱 Check if it is installed correctly SIM-card (sometimes it shifts when inserting tray).
• 🛠️ In extreme cases, reset the network settings in Settings. → SIM-maps and mobile networks → Resetting settings.

FAQ: Answers to Frequent Questions