Preparation for installation: what you need to know before installation
Mounting a Xiaomi TV on the wall is a task that requires not only accuracy, but also an understanding of technical nuances. TV (Like Mi. TV Q2 75" or Mi" TV A2 55") have ultra-thin housings, which makes them visually attractive, but at the same time increases the requirements for reliability of attachment. Errors during installation can lead not only to the fall of equipment, but also to the cancellation of the warranty - many manufacturers consider the wrong installation a violation of operating conditions.
Before you take up the drill, make sure the wall can withstand the load. Drywall, hollow brick or old plaster can be unreliable bases for a TV weighing 15-30 kg. For concrete and brick walls, standard anchor bolts will work, and for drywall, you will need special mole or butterfly mounts. VESA-compatibility of your model is the standard for marking holes on the back of the TV, which should match the bracket.
It's just as important to pick the right place.
- 📏 Height of installation: optimally when the center of the screen is at the level of the eyes of the seated person (usually 100-120 cm from the floor).
- 🔌 Access to the socket: the power cable should not be stretched or overflexed.
- 📶 Router Location: for Smart TV Wi-Fi is important to have no barriers between the TV and the signal source.
If you're in doubt, you should trust the installation to the professionals, but if you do it right, it's only 2-3 hours to install yourself.
Choosing a bracket: which is suitable for Xiaomi
The bracket is the backbone of your TV security. There are three types of mounts suitable for Xiaomi models:
- Fixed ones are the simplest and most reliable, but they don't allow you to adjust the angle of inclination. They're suitable for eye-level installation.
- Sloping - allow you to change the vertical angle (usually) ±15°), Useful for installation above or below the optimal height.
- Rotating (articulated) - allows you to rotate the TV left-right and change the slope, ideal for corner settings, but require a stronger wall.
The main parameter in the selection — VESA-Most Xiaomi TVs have it in specifications:
- 📺 Mi TV 4S 55" — 200×200 mm 400×200 mm (depending on the year of issue).
- 📺 Mi TV Q1 75" — 400×400 mm.
- 📺 Redmi Smart TV X55 — 300×300 mm.
Don't skimp on brackets -- cheap silumin models can deform over time, and the best option is corrosion-resistant steel mounts, such as those from Omnimount, Vogel's or Kromax. Pay attention to the maximum load: it should exceed the weight of the TV by at least 30%.
💡
If you're not sure of the size VESA, Measure the distance between the centers of the holes on the back of the TV – this will be the desired standard.
Tools and materials: full list
So, to avoid being distracted by the missing parts, you have to prepare it in advance.
| Category | List of lists | Notes |
|---|---|---|
| Tools | Drill, drill (⌀6-10 mm), screwdriver (cross/flat), level, roulette, pencil | For concrete walls - a punch |
| Fortress. | Anchor bolts (⌀8-10 mm), dowels, screws (usually come complete with bracket) | For drywall, dowels are "butterflies" or "mole" |
| Additionally. | Insulation, screeds for cables, chill (for cutting corners) | Useful for wire camouflage |
If the wall is covered with drywall, you need to find metal profiles or use traverses to distribute the load, and in extreme cases, you can attach the bracket to a wooden mortgage installed behind the drywall.
Important! Do not use plastic dowels for heavy TVs (from 20 kg) - they will not withstand the load. TV Q2 75) metal anchors of at least 60 mm in length are recommended.
☑️ Tool preparation
Step-by-step: how to fix the TV on the wall
Now, to the most important stage, installation, follow the instructions Step-by-step to avoid errors.
1. Wall markings
Use the level and roulette to mark:
- 📍 Center for the future location of the TV.
- 📍 Distance between bracket holes (standard) VESA).
- 📍 Height of mounting (note that the bracket can add 5-10 cm to the height).
Put a bracket on the wall and mark the drill points with a pencil. Double-check the horizontality of the lines with a level, even a slight skew will spoil the appearance.
Drilling and installation of anchorages
For a concrete wall:
- Drill holes with a depth of 5-10 mm longer than the length of the anchor.
- Remove dust from the holes (can be vacuumed).
- Carefully hammer the anchors with a hammer, then twist the bolts.
For drywall:
- Use butterfly dowels or find a metal profile behind a sheet.
- Twisting screws without excessive effort, so as not to push drywall.
3. Bracket and TV fastening
Place the bracket on the wall, then:
- Join me. VESA-The back of the TV (usually included).
- Twisting the bolts evenly to avoid skewing.
- Hang the TV on the bracket (better with an assistant!).
Critical detail: bolts on VESA-The plate must be tightened at a force of 5-7 Nm (use a dynamometer key if you have one). Too weak attachment will lead to backlash, too strong to cracks in the body.
What if the holes on the TV do not match the bracket?
Hiding Cables: Aesthetics and Safety
Hanging wires spoil the whole view, and you can accidentally hit them.
- 🔌 Cable ducts are plastic boxes that are attached to the wall, suitable for open wiring.
- 🕳️ Strubbing – laying cables inside the wall (requires repair).
- 🔄 Corner bracket with channel – some models (e.g. Omnimount) OE220) have built-in wire compartments.
If you have chosen stroty, consider:
- The depth of the channel shall be at least 20 mm.
- The cables are stacked in corrugated to protect against damage.
- After laying the canal is plastered and painted.
Tip: for Xiaomi TVs with external power supply (like the Mi) TV 4A) leave access to the socket - the block can overheat in a closed space.
💡
Use Certified Cables UL or CE — Cheap wires can melt off the load, especially if the TV consumes 150-200 watts.
Set up the TV after installation
After installation, it remains to configure Smart TV For a comfortable viewing experience, start with the basics:
- 📺 Inclination angle: adjust the bracket so that the screen does not reflect light from windows.
- 🔊 Sound: in the menu Settings → Select Mode "Movie" or "Music" depending on the content.
- 🌐 Network: Connect to Wi-Fi or Ethernet to access Google Play and streaming services.
For Google models TV (Like Mi. TV Q2) recommended:
- Update the firmware through Settings → About TV → System Update.
- Install Netflix, YouTube, Kinopoisk apps from Google Play.
- Set up the Google Assistant voice assistant to control from the remote.
If after installation, artifacts appeared on the screen (for example, broken pixels), check:
- Cable adjoinance density HDMI.
- Settings of permission in the menu Settings → Display and sound → Screen resolution.
- Integrity of the cable (try replacing it with another one).
Frequent Mistakes and How to Avoid Them
Even experienced craftsmen sometimes make mistakes, and here are the most common mistakes when mounting Xiaomi TVs:
⚠️ Attention: If the TV is hanging on drywall without mortgages, the risk of falling increases by 5 times. drywall withstands a static load of up to 15 kg / m2, but dynamic loads (for example, if you hit the screen) can lead to a collapse.
- ❌ Ignoring VESA-standard: bracket with marking 200×200 It's not good for a TV with a 400×400 Check compatibility before buying.
- ❌ Weak fixation of bolts: understretched bolts on VESA-The plate leads to backlash and gradual displacement of the TV.
- ❌ Installation on an inappropriate wall: wooden partitions or walls with cracks will not withstand weight.
- ❌ Laying cables without protection: bare wires can be rubbed or cause short circuit.
Another common problem is that the TV will overheat after installation, and this happens if you:
- Ventilation holes on the back panel are covered by a wall.
- The TV is installed in a niche without air circulation.
- Power cables or HDMI block out airflow.
To avoid overheating, leave a gap of at least 5-10 cm between the wall and the TV. TV Q1) This gap must be at least 15 cm.