How to get it out right SIM-Map from Xiaomi phone: instructions for all models

SIM card is a small but critical element of your smartphone Xiaomi, without which it is impossible to call, send SMS But many people have difficulty retrieving it, the tray doesn't extend, the paper clip breaks, and sometimes the map just gets stuck inside. In this article, we'll look at all the ways to safely extract it. SIM-Maps from Xiaomi, Redmi and POCO, including models with hybrid slots and features of the new flagships of 2023-2026.

It is important to understand that the process can vary depending on the design of the phone. For example, the Xiaomi 13 Ultra uses a retractable tray with a spring mechanism, and the Redmi Note 12 uses a hybrid slot where the device is designed to be a mobile device. SIM-We'll look at universal methods that are suitable for 90% of models, and also give advice on solving unusual situations when the tray is jammed or the paper clips are not at hand.

Preparation for extraction SIM-maps: what you need to know

Before you start retrieving, make sure you turn off the phone. This is not a requirement for all models, but in some cases (for example, with a jammed tray) this will help avoid damage to the contacts.

• 🔍 Type of slot: Standard (only) SIM), hybrid (SIM + microSD or eSIM (in new models like Xiaomi 14).
• 📍 Slot location: 99% of the time it is on the left or right side edge, but in some models (e.g. Mi Mix). 2S) — bottom-end.
• 🛠️ Tool availability: standard paper clip (company), pin or special key SIM-eject tool.

If you have a hybrid slot, remember: it is designed for either two nano-SIMs or one. SIM + microSD. Trying to insert two SIM-The cards and the memory card can also cause the tray to break. POCO F5 The newer slot is often equipped with dust protection - a rubber seal that should not be damaged.

⚠️ Warning: Do not use sharp objects (needles, knives, toothpicks) to remove the tray, this can damage the mechanism or scratch the body of the phone.

Standard method: extraction by means of a paper clip

This is the most common and safe method, suitable for most Xiaomi models, including the Redmi Note 11, POCO X5, Mi 11 and others.

1. Find a small hole near the slot on the side of the phone for SIM-It can be denoted by a pictogram. 📱↗️.
2. Insert a straight clip (or a special key) into the hole to the point. Press with moderate force, it should be a slight click.
3. The tray will extend 2-3 mm. Carefully pull it with your fingers until completely removed.
4. Delete. SIM-card, if necessary, replace it or clean the contacts with dry cloth.
5. Insert the tray back before the click, making sure it sat flat.

If the tray doesn't retract the first time, try swaying the paperclip slightly in the hole or pressing it at a different angle.In Xiaomi 12T and Redmi K50 models, the mechanism can be tighter than in budget smartphones.

Is the phone off?|Is there a key or a key at hand?|Checked the location of the slot?|Ready to replace (if needed)?-->

What to do if the tray is jammed or there is no paper clip

Situations where the tray is not pushed out are more common than it seems, and the causes can range from dust to mechanical damage. Here are some proven ways to solve the problem:

Method 1: Use of alternative tools

If there is no handy paper clip, you can use:

• 📎 Hair clip (thin and durable).
• 🖊️ A rod from a gel handle (pre-heat the tip with a lighter so that it becomes thinner).
• 🧲 Magnet (bring a powerful neodymium magnet to the slot area – sometimes the tray moves from place).

Method 2: Warming up the body (for jammed trays)

If the tray is not extended due to moisture or deformation, you can try okal warming up:

1. Heat the area of the slot with a hairdryer (temperature not higher than 50 ° C) for 1-2 minutes.
2. Try to remove the tray with a paper clip immediately.
3. If it does not help, repeat the procedure, increasing the temperature to 60 ° C (not higher!).

⚠️ Warning: Do not use an open fire (lighter, matches) - this can melt plastic parts inside the phone.

Method 3: Disassembling the phone (extreme case)

If the tray is completely jammed and other methods have not worked, you have to partially disassemble the phone, which is a risky way that can lead to loss of warranty.

1. Remove the back cover (need a mediator and a hair dryer to soften the glue).
2. Unscrew the screws holding the metal plate over the tray.
3. Carefully tuck the tray with tweezers or a plastic spatula.

This method is recommended only for advanced users, and if you are not confident in your abilities, you should contact a service center.

Standard paperclip from the kit | Office paperclip |SIM-eject tool |Spoofs (pin, needle) |I never take out-->

Features of extraction SIM-Maps in popular Xiaomi models

Some Xiaomi smartphones have unique design features that are worth considering, and below is a table with key nuances for popular models:

In models with protection from dust and moisture (for example, Xiaomi 13T Pro) tray can sit tighter than usual. Don't be afraid, this is normal.

💡

If you change SIM cards frequently, buy a metal SIM-eject tool key – it is stronger than a paper clip and does not bend.

How to extract SIM-card if the phone is not turned on

If your Xiaomi does not respond to the power button or hovers on the logo, but you need to get it urgently SIM-map, follow this algorithm:

1. Try a forced reboot: press the power button + increase the volume for 10-15 seconds, sometimes it helps to wake up the phone and normally remove the tray.
2. Use a paper clip on a phone that is turned off: even if the screen is not working, the tray mechanism must work.
3. Connect to charging: sometimes when connected to the network, the phone briefly gives signs of life, and the tray can be pulled out.
4. Carefully tap the body in the slot area (no bigotry!) Vibration can move the jammed mechanism.

If the phone is completely discharged and does not respond to charging, try holding it on charging for 10-15 minutes, and then try to retrieve. In extreme cases, contact the service - the masters can remove the tray without risking damage to the board.

Frequent Mistakes and How to Avoid Them

Even in a process as simple as extraction. SIM-These are the most common errors that users make, which can cause them to break:

• 🔧 Using the wrong tools: needles, knives, forks, it scratches the body and breaks the tray mechanism.
• 💪 Excessive force: if the tray is not pushed, do not push hard - it is better to try another angle of pressing.
• 🔄 Incorrect installation of the tray: if you insert it curved, the phone may not see SIM-card or tray will jam.
• 🚫 Removal with your phone on: In rare cases, this can cause a modem to malfunction (especially in older models on Qualcomm Snapdragon). 820/821).

In Xiaomi models with support 5G (for example, Xiaomi 12S Ultra) improper extraction SIM-If the network is lost after retrieving the card, restart the phone or reset the network settings in the Settings menu. → SIM-maps and mobile networks → Resetting settings.

How to care SIM-map and slot in Xiaomi

To avoid problems with extraction SIM-Maps in the future, follow these tips:

• 🧼 Clean the tray of dust and dirt regularly with a dry soft cloth or brush!
• 🔋 Remove the tray only when the phone is turned off (especially in models with eSIM, such as Xiaomi 14).
• 📦 Keep a spare paperclip in your phone case or next to a charger – it should always be on hand.
• 🔄 Check the correct installation: SIM-the card should lie in the tray so that the bevelled angle coincides with the notch.

If you live in a high-humidity region, wipe your contacts every 2-3 months. SIM-cards and a tray of alcohol (at least 70%) this will prevent oxidation and communication problems.

💡

Never put it in. SIM-If it doesn't come in easily, you're doing something wrong. Check the orientation of the map and the tray.

FAQ: Answers to Frequent Questions