How to get it out right SIM-Map from Xiaomi phone: instructions for all models

Extraction SIM-Xiaomi smartphone cards seem like a simple task, but in practice many people face difficulties, from jammed tray to fear of damaging contacts. SIM This article will examine all the nuances of the process, from the preparation of tools to the solution of emergency situations.

It is important to consider that the design of trays Xiaomi differs depending on the series: for example, the flagship Mi 13 and Redmi Note 12 have different fixing mechanisms, and budget models like the one in the series. POCO M5 We're going to look at universal methods that are suitable for 90% of the brand's devices, and we're going to look at specific cases where you can use plastic latches. SIM-card stuck or tray not extended.

If you've never taken out SIM-If you're on your own or if you're afraid of damaging your phone, this guide will help you avoid common mistakes, and we'll also answer the common questions: can you take out the tray without a paper clip, what to do if you don't have a paper clip? SIM stuck, and how not to lose the guarantee when manipulating the slot.

Preparation: What will be needed to extract SIM-map

Before you start extracting, make sure you have everything you need, and most of the problems are caused by the wrong tools or lack of preparation.

The main tool is a paper clip for extraction SIM-cards (often put in a phone box) if they don't have one, alternatives are good:

• 📎 Standard stationery paperclip, straight-line
• 🔧 Thin needle or pin (with a diameter not exceeding 0.8 mm)
• 📱 A special key from another smartphone (such as from Samsung or Huawei)
• 🔨 Dull end of toothpick (only for emergencies, risk of damaging trays)

Also prepare:

• 🔦 Good lighting (better to use a desk lamp or flashlight)
• 🧻 Soft cloth or napkin to put the phone on a flat surface
• 🔍 Lupu (if you have vision problems or the tray is too small)
• 🧲 Magnet (will be useful if you drop it) SIM-map)

⚠️ Warning: Never use sharp objects (knives, scissors, sewers) - they can scratch the body or damage the tray contacts. Also avoid metal objects with magnetic properties (such as a screwdriver) if your phone has a magnetic Hall sensor (there is in models with wireless charging).

If you are planning to replace SIM-New card, check its size in advance. Modern Xiaomi smartphones support:

• Nano-SIM (most common, used in 99% of models after 2016)
• Micro-SIM (found in older models, such as the Redmi 2 or Mi 4)
• eSIM (only in flagships, for example, Xiaomi 13 Pro or Mix Fold 3)

Where is the slot for SIM-maps in Xiaomi phones

The slot's location depends on the model and year of release, and in most cases it is on the side of the edge, but there are exceptions.

Typical accommodation options:

• 📱 The right side is the most common place (for example, Redmi Note 11, POCO X5, Mi 11) Usually next to the switch button.
• 📱 The upper facet is found in older models (Redmi). 4X, Mi A1) and some budget smartphones.
• 📱 Left side facet is rare, but it happens (for example, Black Shark – gaming smartphones from Xiaomi).
• 📱 Under the battery - only in very old models (until 2015), where the back cover is removable.

To determine the slot's location, look around the phone's body, look for a small hole (about 1 mm in diameter) with a metal ring inside, which is the clip connector. Some models may have a pictogram next to them. SIM-map.

If you can’t find a slot, check the instructions for the phone or use the official Xiaomi website where there is a slot. 3D-Socket models, and in extreme cases, you can type in a search engine, "Redmi Note 12 is where you're going to find a SIM card," and usually the first results are a photo with a marked place.

Step-by-step instructions: how to remove SIM-map

Now, to the process itself, follow the instructions carefully to avoid damage.

1. Turn off your phone.This is not necessary, but it is recommended to avoid accidental tapping or disruption. SIM-If you don't turn off your phone, it's okay, but you better be safe.
2. Put your phone on a flat surface. You'd better use a table or some other solid base. Don't hold the phone on a weight -- if the tray pops out suddenly, you can drop it. SIM-card.
3. Put a paper clip in the slot hole. Push hard, but don't overdo it. You should feel a slight click, which means that the fixing mechanism has worked. If the clip doesn't go in, check if the hole is clogged with dust (you can clean it carefully with a toothpick).
4. Remove the tray. When you click, the tray will extend a few millimeters -- gently pull it with your fingers. Don't use force if it doesn't go! In some models (e.g., in some models, POCO F4) tray is not fully advanced - it must be pricked with a nail or tweezers.
5. Get it. SIM-Carefully remove the card from the tray. Notice its position -- there's usually a diagram on the tray showing which side to insert. SIM. If the card is “stook”, do not try to pull it out by force – slightly shake the tray left-right.
6. Put the tray back in (if necessary) Make sure the tray is inserted smoothly and to the end. If it does not fix, check if there are any foreign objects (dust, pruning) left inside. SIM-map).

If the tray is not extended after pressing the paper clip, try the following actions:

• 🔄 Repeat pressing 2-3 times with an interval of 1-2 seconds.
• 🔍 Check if the hole is not contaminated (you can blow it or clean it carefully).
• 📱 Turn the phone over and try to press the paperclip on the other side (sometimes the hole goes right through).
• 🔧 If nothing helps, the fixing mechanism may have broken - in this case, contact the service center.

⚠️ Note: In Xiaomi models with waterproofing (for example, Xiaomi 13 Ultra or Redmi Note 12 Pro)+) post-extract SIM-The sealing gum on the tray may shift. Before you insert the tray back, make sure that the gum is flat - otherwise the phone will lose its protection from moisture.

Frequent problems and their solutions

Even with careful extraction, there can be difficulties, and we'll look at the most common situations and how to deal with them.

1.The tray is not extended after pressing the paper clip

Causes and solutions:

• 🔧 The mechanism is jammed. Try to gently move the tray with your fingers while pressing the paper clip. Sometimes it helps to tap the phone body near the slot (don't overdo it!).
• 🧹 Mud in the hole. Use compressed air (a balloon) or a thin needle to clear the hole. Don't blow with your mouth - saliva can get in and cause corrosion.
• 🔨 Broken machinery. If the tray doesn't respond at all, don't try to break it down, call the service. Self-repairing can damage the motherboard.

2. SIM-card stuck in the tray

If the card is not taken out of the tray:

• 🧲 Try to poke her with a nail or a plastic card (like a bank card!
• 🔄 Carefully swing the tray left-right - sometimes the card "sticks off».
• 💧 If the card is deformed (for example, after the fall of the phone), do not try to straighten it - it is better to replace it with a new one.

3.The tray has fallen, but is not fixed back

Possible causes:

• 🔍 Dust or debris in the slot. Blow the slot with compressed air or gently clean with a soft brush.
• 🔧 A bent tray. Put it on a flat surface and press it a little bit to straighten it out. Don't bend too much, the trays are made of thin metal.
• 📱 Incorrect position. Make sure the tray is inserted on the same side as the one that was removed. Some models have a label on the tray (for example, an arrow or an inscription «UP»).

4.The phone can't see. SIM-post-resetting

If after removal and re-installation SIM-map is not defined:

• 🔄 Reboot the phone.
• 📶 Check if the card is inserted correctly (compare with the diagram on the tray).
• 🧹 Wipe your contacts. SIM-cards and tray with soft fabric (you can moisten with alcohol).
• 📱 Update your phone’s firmware – sometimes recognition bugs SIM Corrected in new versions MIUI.
• 🔧 If nothing helps, try another one. SIM-card to rule out its malfunction.

💡

If the tray falls out too easily, it can be a sign of wear and tear of the locking mechanism. Temporarily fasten it with a small piece of tape (without closing the contacts!), but contact the service as soon as possible to replace the tray.

Features of extracting SIM-cards in different models of Xiaomi

Some Xiaomi smartphones have unique design features that you should know about in advance.

1. Waterproof models (IP53/IP68)

Phones with water and dust protection (for example, Xiaomi 13 Ultra, Redmi Note 12 Pro)+, POCO F5 Pro) have additional sealing gums on the tray. SIM-map:

• 🔍 Check the integrity of the rubber band – if it is torn or deformed, the water protection will be broken.
• 💧 Do not remove the tray in the rain or in high humidity conditions.
• 🔄 After installing the tray back, make sure it fits tightly to the body.

2. Hybrid slots (SIM + microSD)

In most budget and mid-budget models (e.g. Redmi 10, POCO M4 Pro) uses a hybrid slot where you can install either two Nano-SIMs or one Nano-SIM. + memory card, when extracted:

• 📱 If you use two of them SIM-Pay attention to the order of installation of the cards. SIM1 supportive 4G, SIM2 — only 2G/3G.
• 🔧 If you're replacing SIM on microSD, make sure the tray is switched correctly (sometimes you need to physically move the separator).
• ⚠️ Do not insert microSD into the slot SIM — This can damage your contacts!

3. Smartphones with a retractable mechanism (for example, Mix Fold)

Xiaomi foldable phones (such as the Mix Fold 2 or Mix Fold 3) have a custom tray design.

• 📱 Extract. SIM-card only in the unfolded state of the phone.
• 🔧 Do not apply force - the tray mechanism is connected to the folding hinge.
• 🔄 After extraction, check if the dust has hit the hinge.

4. Old models with removable lid

In phones before 2016 (e.g. Redmi) 3S, Mi 4i) SIM-The card is mounted under the removable back cover:

1. Turn off the phone and remove the lid (usually it is held on the latches).
2. Take the battery out carefully (if it is removable).
3. Extract. SIM-card from the slot (usually located under the battery).
4. Reset the lid back, making sure all latches are locked.

How to extract SIM-map without paper clips: alternative methods

If you don't have a paper clip, you can use the tools you can use, and the main thing is not to damage the phone.

1.Use of headphones with buttons

If you have wired headphones with a control button (such as Xiaomi Piston):

1. Cut the 3.5mm plug (if headphones are not needed).
2. Insert the bare wire into the slot hole.
3. Push carefully until the tray is pushed out.

⚠️ Be careful – do not damage the insulation of the wire, so as not to close contacts inside the phone.

2. Paper clip or paper clip from a notebook

Paperclips in office notebooks are thinner than standard ones, but they can be folded in half for stiffness.

• Untighten the paperclip.
• Put it in the hole and press it.
• If the paperclip bends, try to double it.

3. Toothpick or plastic fork

Only as a last resort:

• Break the sharp tip of the toothpick so as not to scratch the body.
• Put the blunt end in the hole and press.
• If the toothpick breaks, carefully remove the fragment with tweezers.

4. With the help of another phone.

If you have a second smartphone with a working tray:

• Remove the tray from the second phone.
• Insert it into the troubled Xiaomi slot at a 45-degree angle.
• Press carefully to activate the push mechanism.

⚠️ Warning: Never use sharp objects (needles, pins, knives) to extract the tray unless you are sure of your actions. The risk of damaging the motherboard or antenna contacts is very high, especially in thin phones like the Xiaomi 13 Lite.

💡

If you often extract SIM-card (for example, for trips abroad), buy a metal key for a tray - it is more reliable than a paper clip and will last for years.

What to do after extraction SIM-maps: care tips

After you got it. SIM-The card should pay attention to a few points to avoid problems in the future.

1. Contact cleansing

Over time, on the contacts. SIM-The cards and the tray accumulate dust and oxides, which can lead to a bad signal:

• Use a soft eraser (wash your contacts) SIM-map).
• Wash the tray with a cotton swab soaked in isopropyl alcohol (do not use vodka or cologne!).
• Allow everything to dry before resetting.

2. Integrity verification SIM-map

Look at the map for the subject:

• 🔍 Scratching or chipping on contacts.
• 💧 Traces of corrosion (green plaque).
• 🔄 Deformation (if the card is bent, it is better to replace it).

If contacts are damaged, contact the operator for replacement SIM-Cards (usually free).

3.Supplier storage SIM-map

If you've extracted SIM-Replacement card, don't throw away the old one. Keep it in:

• 📄 Special plastic container (combined with new one) SIM).
• 📂 Foil envelope (protects against static electricity).
• 🔑 Case for bank cards (mainly so that there are no magnetic fasteners).

4. Checking the operation of the telephone

After re-installation SIM-map:

• 📶 Make sure the phone catches the network (check the signal indicator).
• 📞 Try to make a test call.
• 🌐 Check the mobile Internet operation.
• 🔄 If something doesn’t work, restart your phone or check your network settings in Settings. → SIM-maps and mobile networks.

If, after extraction, SIM-The phone stopped seeing the network, try it:

1. Insert SIM-card to another smartphone – if it does not work, the problem is in the map.
2. Check if the settings have gone wrong APN (point).
3. Reset network settings to Settings → System → Settings Reset → Reset settings Wi-Fi, mobile network and Bluetooth.

FAQ: Answers to Frequent Questions