Extraction SIM-Xiaomi Redmi cards are a challenge that every owner will face sooner or later. Whether you change operator, send your phone for repair or just want to clean the tray of dust, the procedure requires accuracy. Despite its apparent simplicity, careless handling of the tray can cause the latch to break, damage to the contacts, or even debris to enter the body, especially for hybrid slot models where the latch is not easily accessible. SIM Shares space with a microSD memory card.
In this article, we will look at all the nuances, from tool preparation to solving emergency situations (for example, if the tray is jammed or the paper clip broke inside), and pay special attention to the differences between the models - the Redmi Note 10 and Redmi 9A have different types of trays, and this affects the extraction process, and you will learn how to avoid common errors that lead to contacting the service center.
If you never took it out. SIM-Now, if you're doing this for the first time, don't worry. Statistically, 80 percent of tray failures are due to the use of inappropriate tools (toothpicks, needles) or excessive power, and we'll show you how to avoid risks even if you don't have a brand key on hand.
1.Preparation: What will be required to extract SIM-map
Before you start, make sure you have everything you need, the wrong tool is the main cause of damage to the tray.
- 🔑 Paperclip for SIM-card (complete with phone) or special key. If you lost it, you'll get a paper clip straight straight up.
- 📱 Smooth surface: A table or other solid plane so that the phone doesn’t slip when pressed.
- 🔦 Good lighting: the hole for extracting the tray is small, and in a poorly lit room it is easy to miss.
- 🧲 Magnet (optional): will help if the paper clip fell inside the case (relevant for models with a metal frame).
If you have a Redmi with a hybrid slot (for example, Redmi Note 11 Pro), where one SIM and microSD share the same socket, prepare tweezers as well - it will come in handy for careful extraction of cards if they are "stuck" to contacts.
Important: Never use sharp objects (needles, toothpicks, knives) that can scratch the body or damage the interior parts. If the paperclip is too thick and does not enter the hole, do not press harder, but find a thinner tool.
💡
If you change often SIM-card, buy a metal key with a magnetic tip - it will last for years and will not bend, unlike a paper clip.
2. Where is the tray for SIM-maps in Xiaomi Redmi
The slot’s location depends on the Xiaomi Redmi model, and is usually on the left end of the case (when you look at the screen), but there are exceptions:
- 📱 Redmi Note 10/11/12, Redmi 9/9A/9C: tray on the left, next to the volume buttons.
- 📱 Redmi 8/8A, Redmi 7/7A: tray on the right, under the power button.
- 📱 Redmi K40/K50: The top of the box, near the headphone jack (if any).
To make sure you're not mistaken, look around the phone's body. ~1 mm is the tray extraction jack, and some models have a pictogram next to them. SIM-map.
Tip: If you can’t find the hole, shine a flashlight along the end of the case – it will be noticeable as a small depression.
| Xiaomi Redmi Model | Location of the tray | Slot type |
|---|---|---|
| Redmi Note 10 Pro | Left end (near the volume buttons) | Hybrid (2 SIM + microSD) |
| Redmi 9A | Left end | Normal (2 SIM) |
| Redmi 8 | Right end (under the power button) | Hybrid (2 SIM + microSD) |
| Redmi K50 | Upper end | Normal (2 SIM) |
What to do if the hole for the paper clip is clogged with dust?
3. Step-by-step instruction: how to pull the tray from the SIM-card
Now, let's get to the process. Follow the instructions carefully to avoid errors:
- Turn off your phone.This is not necessary, but it is recommended to avoid accidental screen taps or disruptions. SIM-extraction.
- Place the Xiaomi Redmi on a flat surface with the screen upwards. Make sure the clip hole is accessible and not covered with a cover.
- Insert a paper clip (or key) into the hole at an angle of ~45° and press with enough force to trigger the latch. You will feel a slight click.
- After clicking, the tray will extend 1-2 mm. Carefully pull it with your fingers or tweezers to fully remove.
Critically, don't push the paperclip at right angles (90°) -- it can break the latch mechanism inside the case, and a 45° angle ensures that the force is evenly distributed.
Make sure the phone is off (optional) | Prepare a paper clip or key | Put the phone on a flat surface | Check if there is any dust in the paper clip hole | Remove the tray in a smooth movement-->
If the tray is not extended after pressing:
- Try pressing again, maybe the clip didn't reach the latch.
- Check if the hole is contaminated.
- If the phone fell, perhaps the tray deformed - in this case, contact the service.
⚠️ Note: Do not use toothpicks or matches to remove the tray, they can break inside the case. If the paperclip is stuck, do not try to pull it out with tweezers: you should contact the Xiaomi service center.
4. Features of hybrid slots: SIM + microSD
Many Xiaomi Redmi models (e.g. Redmi Note 11 or Redmi) 10C) are equipped with hybrid slots, where the second slot can be used for the second slot SIM-It's either a microSD card or a microSD card, and there's a little bit of a nuance when you extract these trays:
- 🔄 If you use a microSD, remove it carefully – the contacts on the memory card are thinner than on the memory card. SIM, and they're easier to bend.
- 📱 In hybrid slots SIM-The cards are set with the contacts down and the microSD with the contacts up, and you can't mix them up because of the different sizes, but you can be very careful about the orientation.
- ⚠️ Do not insert two into the hybrid slot. SIM-MicroSD and card cards at the same time are physically impossible and can damage your contacts.
If you are planning to replace microSD with a second one SIM-Note that the phone will require a reboot to recognize new modules.In some models (e.g. Redmi). 9T) When installing a microSD second SIM-card automatically shuts down.
Example: In the Redmi Note 10 Pro, the slot supports a 1 SIM + microSD or 2 SIM scheme. If you removed the tray to add a memory card and the second SIM was active, after installing the microSD, it will stop working until you return to the 2 SIM configuration.
💡
Hybrid slots save space in the case, but require compromises. Before removing the tray, decide what is more important: the second one is the first one. SIM-card.
Frequent problems and their solutions
Even with a careful handling of the tray, difficulties can arise. Let's consider typical situations and ways to eliminate them:
The tray does not extend after pressing the paper clip
- 🔧 Possible cause: a hole clogged or a latch broke. Try blowing the hole through with compressed air or gently cleaning with a soft brush.
- 🔨 If the tray is jammed after the phone falls, do not try to pull it out by force - this can damage the motherboard.
The paper clip broke inside the case.
- 🧲 Use a magnet to pull the debris out (bring it to the hole and pull it gently).
- 🛠️ If the magnet is not working, do not pick the hole with a needle - you risk damaging the antenna contacts.
The tray falls out or is not fixed
- 🔄 Check if the metal latch on the tray is bent. If so, straighten it carefully with tweezers.
- 📦 Maybe there's garbage in the lap of the tray. Clean it with a dry brush or compressed air.
⚠️ Note: If after removal SIM-The phone stopped catching the network, check: Is it installed correctly SIM-map (contacts should be downwards) is there any damage to the card itself (scraps, scratches on contacts) is Flight mode activated in settings (Settings) → SIM-If the problem persists, try inserting SIM-card to another phone to prevent its malfunction.
6 How to insert SIM-map back: nuances
Installation of the tray with SIM-The card back to Xiaomi Redmi requires no less accuracy than the extraction:
- 📱 Make sure that SIM-The card is trimmed to nano-SIM size (most modern Redmis do not support micro-SIM or standard SIMs). SIM).
- 🔄 Check orientation: the bevelled corner of the card should match the angle on the tray.
- 📌 Insert the tray to the point, but without undue effort. If it does not enter smoothly, remove and check if the cards are correctly installed.
After installing the tray, the phone may require a restart to activate SIM-Some models (e.g. Redmi Note 12) will have a notification: «SIM-map discovered. Reboot now? - confirm the action.
Important for hybrid slots: If you use a microSD, check the tray in Settings → Storage after installing it. Sometimes the memory card is not immediately determined, in which case remove and insert the tray again.
7. Alternative methods of extraction SIM-cards (if the tray is jammed)
If the standard paper clip method has failed and the service center is not available, alternatives can be tried, cautioned that these methods are risky and can lead to a loss of warranty.
- 🔧 Disassemble the body. This will require a plastic spatula (or mediator) and a screwdriver. Carefully apply the back cover, starting at the bottom edge, then disconnect the battery plume and remove the tray manually. This is only suitable for models with a removable lid (for example, Redmi). 4X).
- 🧲 Use a strong magnet. Hold the neodymium magnet to the tray area, which sometimes helps to move the latch. Don't bring the magnet to the speakers or the camera!
- 📱 Software reset (last resort) on some models after reset to factory settings (Settings) → The phone. → Reset settings) the tray unlocks. The method works rarely and deletes all data!
⚠️ Attention: Disassembling the phone without experience is fraught with damage to the plumes or the separation of the antenna contacts. If you are not confident in your abilities, you should consult a specialist. The cost of repairing a jammed tray in the Xiaomi service usually does not exceed 500-1000 rubles.