How to remove the filter from the vacuum cleaner Xiaomi Dreame: instructions for all models (V9, V10, V11, V12)

Xiaomi Dreame vacuum cleaners have become popular thanks to their powerful suction, convenient design and multi-stage filtration system. However, over time, any filter gets clogged with dust, loses bandwidth and requires cleaning or replacement. If you notice that the vacuum cleaner has become worse to suck, there is an unpleasant smell or increased power consumption, most likely the problem lies in clogged filters.

In this article, we will discuss in detail how to properly remove all types of filters from the vacuum cleaner Xiaomi Dreame (models). V9, V10, V11, V12 And they're modified. You'll know where they are. HEPA-filter, washable prefilter and motor filter, how to dismantle them without damage, and also get tips on care and frequency of replacement.

Before you start, make sure the vacuum cleaner is off (for network models) or that the battery is removed (for wireless versions).This will prevent accidental switching on during disassembly. Also prepare a soft fabric, a soft bristle brush and a vacuum cleaner to clean up the fallen dust - it can fly apart when the filters are removed.

1. Types of filters in vacuum cleaners Xiaomi Dreame: where are they?

The Xiaomi Dreame vacuum cleaners are equipped with a multi-stage filtering system, which includes from 2 to 4 filters depending on the model.

• 🔹 Cyclone filter (pre-filter) - captures large particles of dust and debris, located in a dust collector (container for garbage).
• 🔹 HEPA-filter (fine cleaning) - traps fine dust, allergens and bacteria, located behind the engine compartment or in the upper part of the body.
• 🔹 Motor filter (engine protection) - prevents dust from entering the engine.
• 🔹 Washing filter (for models with aquafiltration) - used in vacuum cleaners such as Dreame V11 Absolutely or V12 Pro.

Most of the Dreame models V9/V10 There are two main filters: cyclone (in a container) and HEPA (In the advanced versions (V11, V12, Bot W10) It adds a motor filter and/or a washing element:

Important: in vacuum cleaners with aquafiltration (for example, Dreame) V12 Pro) the washing filter requires a weekly washing or it will be molded.

2. How to remove the cyclone filter (pre-filter) from the dust collector

A cyclone filter is the first barrier to dust, and it's located inside a dust collector, and it's usually a plastic mesh or a cone to extract it.

1. Turn off the vacuum cleaner from the power supply (take out the battery if the model is wireless).
2. Press the dust collector opening button (usually marked with the urn icon).
3. Take out the container and roll it over the trash can.
4. Inside you will see a cyclone filter – pull it up behind a special handle or protrusion.

In some models (e.g. Dreame) V10) The cyclone filter has two parts: the outer plastic case and the inner mesh:

Turn off the vacuum cleaner from the network|Press the dust collector opening button|Take out the container and turn it over.|Pull the filter up by the handle|If necessary, remove the filter parts.-->

After removal, clean the filter with a soft brush or rinse under warm water (if permitted by the instructions). Do not use aggressive detergents, they can damage the material. Dry the filter for at least 24 hours in a ventilated place, avoiding direct sunlight.

⚠️ Warning: If the cyclone filter is deformed or cracked, it must be replaced, and the damaged filter will not be able to effectively trap dust, which will lead to clogging of the engine.

3. Extract HEPA-filter: step-by-step instructions

HEPA-The high efficiency particulate air filter is responsible for finely cleaning the air from small particles (pollen, bacteria, mold spores). In Xiaomi Dreame vacuum cleaners, it is usually located at the top of the case or behind a removable panel to reach it:

For Dreame models V9/V10:

1. Turn the vacuum cleaner down (if it is a vertical model).
2. Find the latch or button on the top cover (usually marked with the filter icon).
3. Open the lid and remove it. HEPA-filter by pulling it by the plastic frame.

For Dreame models V11/V12:

1. Remove the dust collector (as described in the previous section).
2. Under it you will see a round or rectangular cover - unscrew it or move it to the side.
3. Get it. HEPA-filter, carefully pulling over the edge.

HEPA-filters are washable (you can wash with water) and disposable (replace only). Specify the type in the instructions for your model. If the filter is washed, wash it under cool water without detergents and dry thoroughly. Don't brush the filter, it can damage the microscopic pores.

Critical information: in vacuum cleaners Dreame Bot W10 and V12 Pro HEPA-The filter is integrated with the carbon layer to absorb odors, and you can't wash it, you can only replace it every 6 to 12 months.

Dismantling of the engine filter (for models) V10, V11, V12)

The engine filter protects the engine from dust and extends its life, and it is not available in all models, for example, in Dreame. V9 He's not, but in V10, V11, V12 It's installed next to the turbine, so you can get to it:

1. Take the dust collector off and HEPA-filter (as described above).
2. Turn over the vacuum cleaner and find a removable panel on the back or bottom of the case (usually mounted on latches or screws).
3. Open the panel - under it you will see a motor compartment with a filter (most often a flat sponge or mesh).
4. Carefully remove the filter by pulling over the edge.

The motor filter is usually washable. Wash it under warm water with mild soap, then squeeze it (without twisting it!) and dry it. Don't use a hair dryer or battery to speed up drying, it can warp the material.

⚠️ Note: if the engine filter is oiled or has traces of melting, it is a sign of overheating of the engine, in which case the filter should be replaced, and the vacuum cleaner checked at the service center.

In some models (e.g. Dreame) V12 Pro) the motor filter is combined with a noise suppressing gasket. When you install it back, make sure that the gasket is flat, otherwise the vacuum cleaner will work louder.

5 Features of filter extraction in Dreame Bot vacuum cleaners

In the robot vacuum cleaners Xiaomi Dreame Bot (models) W10, D9, L10 Pro et al.) the filtration system is more compact, but the principles are the same:

• 🔹 HEPA-filter is located under the upper cover (opens by pressing the latch).
• 🔹 The cyclone filter is integrated into the dust collector and is often not removable (cleaned with the container).
• 🔹 The engine filter may be missing or may be combined with HEPA.

To get the filter out of Dreame Bot W10:

1. Turn the robot upside down.
2. Press the lid opening button (usually next to the on button).
3. Under the cover you will see a round HEPA-filter - pull it up.
4. In some models, the filter is fixed by a rotary mechanism - turn it counterclockwise and pull it out.

In robot vacuum cleaners, filters are smaller, so you need to clean them more often, about once every 1-2 weeks. Use only water for washing, as detergents can leave a film that degrades throughput.

💡

If the robot vacuum cleaner is getting worse after cleaning the filter, check the turbine unit for blockages. Often hairs and threads are wound onto the shafts, blocking work.

6. How often should the filters be cleaned or changed?

Frequency of filter maintenance depends on the intensity of the vacuum cleaner and the type of cleaning.

If you have pets, allergies or young children in your home, the filters clog up faster.

• 🐕 Clean the cyclone filter after each cleaning (especially if you have long-haired pets).
• 🤧 Change. HEPA-filter every 3-4 months if you have allergies in your home.
• 🏡 Wash the filter with hot water (60).°C) once a week for disinfection.

Important: If the vacuum cleaner starts to spontaneously shut down or make an uncharacteristic whistle, this is a sure sign of a clogged filter or motor. Immediately clean all the filters and check the turbine for foreign objects.

7.Typical errors in filter removal and how to avoid them

Many users make mistakes that cause filters to break or the vacuum cleaner to deteriorate.

• ❌ Using sharp objects to extract the filter, it can puncture. HEPA-How to do it right: use only your hands or plastic tweezers.
• ❌ Washing filters with hot water or detergents; high temperatures warp the material, and chemistry clogs the pores; how to wash them under cool water (max. 40)°C) without soap.
• ❌ Incomplete drying before installation, a wet filter will become a breeding ground for mold and bacteria, and rightly so, dry the filter for at least 24 hours in a ventilated place.
• ❌ Installation of the wrong side filter. HEPA-filters have the direction of air flow (usually indicated by an arrow) How to do it: check the labels on the filter and the case.

Another common mistake is ignoring the motor filter, and many people only clean the cyclone filter. HEPA, And forgetting to protect the engine, and that leads to increased wear and tear on the turbine and shortened vacuum life.

⚠️ Warning: If the vacuum cleaner is louder after cleaning the filters, check if the debris has entered the bearings of the turbine.

8.Where to buy a replacement and how to choose the right filter?

Filters for vacuum cleaners Xiaomi Dreame can be bought:

• 🛒 Xiaomi official store (original parts, but more expensive).
• 🌍 AliExpress, Amazon, Wildberries (a large selection of analogues at low prices).
• 🏬 Home appliances stores (for example, M. Video, Eldorado»).

When choosing a filter, pay attention to:

1. Model vacuum cleaner - filters for Dreame V10 not fit for V12.
2. Type of filter — HEPA, cyclone.
3. Compatibility – some filters are universal (for example, for the use of V10 and V11).
4. Material – original filters are made of synthetic fibers, cheap analogues can be made of paper (they break quickly).

Average cost of filters (for 2026):

• 💰 HEPA-filter - 300-800 rubles.
• 💰 Cyclone filter - 200-500 rubles.
• 💰 Motor filter - 400-1000 rubles.
• 💰 Filters – 800-1500 rubles.

If you're buying a non-original filter, look at the reviews, because cheap ones can filter the air poorly or they can't fit in. For example, for Dreame. V11 Absolute is better to take the original HEPA-carbon filter – it removes odors more efficiently.

💡

Always check the filter article before buying. V10 original HEPA-filter DMF-F01, for V12 Pro — DMF-F05.

FAQ: Frequent questions about filters in vacuum cleaners Xiaomi Dreame