How do you put it in? SIM-Map in Xiaomi Redmi 5: instructions with photos, videos and life hacks

Xiaomi Redmi 5 is one of the most popular budget smartphones of 2017-2018, which is still actively used. SIM-maps: where the tray is, how to open it, what size SIM is needed and why the phone does not see the network after installation.

The Redmi 5 features a hybrid slot, either two nano-SIMs or one nano-SIM+ MicroSD card (up to 256GB), which means that if you want to expand your memory, you have to sacrifice a second SIM, and we'll show you how to avoid installation errors and what to do if your smartphone doesn't recognize the operator.

This article is relevant for all Redmi 5 versions: standard, Redmi 5A and Redmi 5 Plus. Instructions are universal, but we will point out the key differences between the models.

Preparation: what SIM-The card is needed for Xiaomi Redmi 5

Before inserting the SIM, make sure it is the right size. Redmi 5 supports only nano-SIM (4FF, 12.3×8.8 mm format) If you have a regular or micro-SIM, it will have to be trimmed or replaced in the cabin of the operator.

Here’s how to determine the type of card you have:

• 📱 Standard. SIM (1FF): The largest, used in older phones (before 2010).Redmi 5 is not suitable for the first time.
• 🔄 Micro-SIM (2FF): Medium size, popular in 2010-2015, can be trimmed to nano-SIM.
• ✅ Nano-SIM (4FF): The Redmi 5 is a modern format, and if your SIM is bigger, you should replace it.

⚠️ Attention: Do not try to insert micro-SIM into the tray without an adapter! this can damage the slot contacts or jam the mechanism, Tele2 etc. – the replacement of the simka is done free of charge or for a nominal fee (50-150 rubles).

If you decide to trim the SIM yourself, use the template for nano-SIM (there is in the trim kits) or carefully circle the contours with a pencil. The main thing is not to damage the chip! Alternative: buy a micro-SIM adapter → nano-SIM (costs ~ 100 rubles on AliExpress).

💡

Before trimming the SIM, take a photo of it from both sides – this will help restore contacts if something goes wrong.

Where is the slot for SIM-maps in Redmi 5

In Xiaomi Redmi 5, the sim tray is located on the left side of the body (when you look at the screen with the front side), it is easy to recognize by the small hole for the extraction tool.

Here's how to find him:

1. Take the phone in your right hand with the screen.
2. Look at the left end - there will be a small rectangular cutout with a metal rim.
3. In the cutout, you can see a hole with a diameter of ~1 mm - this is for a paper clip or key (goes complete with a phone).

⚠️ Warning: Don't confuse the SIM slot with the headphone jack (3.5 mm) - it's on the top end! There may be a volume button on the left side, but it's closer to the screen.

If you're not sure, look at the phone box -- there's usually a diagram of the elements -- or take a picture of us.

Step-by-step: how to open the tray and insert SIM-map

Now, let's get to the process. You're going to need to do this.

• 🔑 Paperclip (or special key from the Xiaomi kit).
• 📱 Nano-SIM (or micro-SIM with adapter).
• 🔍 Good lighting - the tray is small, easy to drop the sim.

Follow the instructions:

1. Turn off the phone. This is not necessary, but it is recommended to avoid crashes when initializing the SIM.Push and hold the power button, then select Turn off.
2. Find a hole to remove the tray (see the previous section). Insert the paper clip at a 45° angle and slightly press until the tray is pushed out 1-2 mm.
3. Take the tray out with your fingers carefully. Don't pull too hard -- it should come out smoothly.
4. Put it down. SIM-slot-card: 📶 Slot 1 (upper): supports 4G/LTE (recommended for the main sim). 📶 Slot 2 (bottom): only 2G/3G MicroSD (if you use a memory card, you can not insert a SIM here!).

Make sure the SIM is in the contacts down.

Put the tray back in.

Turn on the phone.

Check the format of the simka (nano-SIM)

Turn off the phone.

Prepare a paper clip or key

Make sure that the SIM contacts are clean.

Put the SIM down with the contacts.-->

🎥 Video Instructions: If it is difficult to understand from the text, watch the official video from Xiaomi (available on YouTube on request "Redmi 5" SIM Pay attention to the moment of insertion of the tray - many users insert it inverted, which is why the phone does not see the SIM.

Common Mistakes and How to Avoid Them

Even after installing the Redmi 5 SIM correctly, it may not show the network, and here are the most common problems and solutions:

⚠️ Note: If after installing the SIM phone writes"SIM-The card is not supported, which may mean that the card is damaged or blocked by the operator. Try inserting it into another phone - if the problem persists, contact the salon.

Another common mistake is to use a memory card and two Sims at the same time. In Redmi 5, this is impossible because of the hybrid slot! The priority is given to the last one you inserted, for example, if you put two SIMs first and then you added MicroSD, the second SIM will stop working.

How to set up a network after installation SIM-map

Once you've successfully installed the SIM, you need to set up your mobile network.

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose yours. SIM-map (if there are two, set each separately).
3. Turn on the options: 📶 Mobile data (for Internet access). 📞 Calls (if SIM for voice communication). 📶 4G (LTE) — select mode 4G/3G/2G (motor-car).

APN access point

• Press the Access Point Name (APN).
• Select your operator’s settings (for example, internet.beeline.ru for Beeline).
• If there is no automatic profile, enter the data manually (you can find them on the operator's website).

💡

If after all the manipulations the network does not appear, check if it is blocked. SIM-map IMEI. This can happen if the phone was wanted or bought with hands without checking.

What to do if the tray is jammed or broken

Sometimes the tray SIM-The cards stop being pushed or they don't stick in:

• 🔧 Infection of dust/mud into the mechanism.
• 💥 Strong pressure during installation (bent guides).
• 🔄 Incorrectly installing a SIM or MicroSD (jammed).

Here's how to solve the problem:

1. If the tray doesn't extend: Try using a thicker paper clip or needle. Light up with a flashlight, maybe there's dirt in the hole. Carefully move the tray with your fingers while pressing the paper clip.
2. If the tray is not inserted to the end: Check if the metal guides inside the phone are bent. Make sure the SIM or memory card do not protrude beyond the edges of the groove. Try inserting the tray without the SIM - if it comes in normally, the problem is in the card itself.

If the mechanism is broken:

• Contact the Xiaomi service center (slot replacement costs ~500-1000 rubles).
• Temporary solution: Use tweezers to gently insert the SIM into the tray bypass (risky!).

⚠️ Warning: Do not try to disassemble the phone yourself - in Redmi 5 slot soldered to the motherboard, and careless actions can damage the antenna or contacts.

Compatibility of Redmi 5 with operators and 4G-net

Xiaomi Redmi 5 supports the following communication standards:

• 📡 2G: GSM 850 / 900 / 1800 / 1900 MHz.
• 📡 3G: HSDPA 850 / 900 / 1900 / 2100 MHz.
• 📡 4G LTE: bands 1, 3, 5, 7, 8, 38, 40 (supported by most Russian operators).

This means that the phone will work with:

• 🇷🇺 All Russian operators: MTS, Beeline, MegaFon, Tele2, Yota.
• 🇧🇾 Belarusian: A1, MTS Belarus, life:).
• 🇺🇦 Ukrainian: Kyivstar, Vodafone, Lifecell.
• 🇰🇿 Kazakhstani: Beeline KZ, Kcell, Tele2 KZ.

🔹 Important: For full-time work 4G SIM must support VoLTE (voices on the LTE). Check with the operator if this option is activated. If not, the calls will go through the phone. 3G, and the Internet through 4G (This is normal, but it can slow down the speed).

If you have a Redmi 5A, note that this model does not support the LTE 20 (800 MHz) range that Yota and some MegaFon towers use, in which case 4G speeds may be lower than the Redmi 5 standard version.

FAQ: Answers to Frequent Questions