How to insert it correctly SIM-map 11T: instructions with photos and tips for choosing a tariff

Xiaomi 11T (model code 2108119DG for the global version) is equipped with a hybrid slot for two nano-SIM or one nano-SIM + microSD memory card. Despite the apparent simplicity of the procedure, improper installation can lead to loss of communication, damage to contacts or even lock the slot. In this article, we will analyze not only the basic instructions, but also the nuances: from the difference between the physical and eSIM to the choice of the optimal tariff for the second number.

The Xiaomi 11T is not a traditional latched retractable tray, but instead uses a spring-mounted metal tray that requires precise positioning when inserted, and if you are first encountering this design, we recommend reading the section on typical errors, which will save you time and nerves.

This article is relevant for all Xiaomi 11T versions, including the 11T Pro and 11T Lite, as the design of the slot is identical. If you have a different model (for example, Redmi Note 11), check compatibility in the compatibility table below.

Preparation: What you will need before installation

Before starting the installation SIM-- I'll give you a card, make sure you have everything you need:

• 📱 Xiaomi Smartphone 11T with a battery charge of at least 20% (in case a reboot is required).
• 🪨 A paper clip or a special key to remove the tray (company with your phone) Do not use pins or needles - they can damage the mechanism.
• 📇 Nano-SIM card (or two if you plan on Dual-SIM) Micro-SIM or standard SIM They will not fit - they will have to be trimmed, which is fraught with the risk of damage to the chip.
• 🔍 Lump or flashlight (optional, but will help to see contacts in poor lighting).
• 📱 Backup phone (in case you need to call the operator to activate) SIM).

If you are planning to use MicroSD, consider that the Xiaomi 11T hybrid slot can install either a second SIM or a memory card, both options are not supported, the volume of supported MicroSD is up to 1 TB, but for stable operation we recommend A2 or UHS-I cards.

💡

If you're buying a new one SIM-You can ask the operator to activate the card before you install it on the phone. SMS, and without SIM It's not going to be possible.

Before removing the tray, be sure to turn off the phone. Although the Xiaomi 11T supports hot SIM replacement (without rebooting), the risk of short circuits with careless actions remains. To turn off the device, press the power button and select Turn off.

Where is the slot for SIM-maps in Xiaomi 11T

Unlike some Xiaomi models, where the slot is on the top edge, the 11T is on the left end (if you look at the screen with the front side), next to the slot you will see a small hole - this is a socket for extracting the tray.

To avoid confusion, focus on such labels:

• 📍 Left end is a slot for SIM.
• 🔊 The bottom face is the connector. USB-C, speaker.
• 🔋 Right face - volume and power buttons.

If you hold the phone in your hands, the slot will be about the middle finger. Some Xiaomi 11T boxes have a sticker with a diagram of the items — save it or take a picture for the future.

Step-by-step instruction: how to insert SIM-map

Now, to the process itself, follow the instructions carefully to avoid damaging your contacts.

1. Remove the tray: Insert the paper clip into the hole next to the slot and press until the click. The tray should extend 1-2 mm. Carefully pull the tray on itself parallel to the body. Don't pull at an angle - this can bend the contacts!
2. Install. SIM-Map(s): Place the tray on a flat surface with the contacts up. Place the nano-SIM in the appropriate slot. SIM1 and SIM2 (Make sure the angle of the card is the same as the angle on the tray.
3. Put the tray back in: Carefully insert the tray into the slot to the end. It should snap without effort. If the tray is not fixed, check if the cards are correctly installed.

Turn on the phone:

• Press the power button to turn on the Xiaomi 11T.
• Wait for the network icon to appear in the status bar (usually takes 30-60 seconds).

If the network does not appear after turning on, check:

• 🔄 Reboot the phone.
• 📶 Manually select the operator in the settings: Settings → SIM-maps and mobile networks → Choice of network.
• 🔧 Make sure that SIM-Card activated (call from another phone to her number).

What are they? SIM-The cards are supported by Xiaomi 11T

Xiaomi 11T compatible with three types SIM-map:

If your carrier offers eSIM, note that Xiaomi 11T does not support it, in which case you will have to use a physical nano-SIM. Among the popular carriers that issue nano-SIM by default: MTS, Beeline, MegaFon and Tele2. If you have an old SIM, it can be replaced for free in the salon.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when installing SIM-Here are the most common problems and their solutions:

⚠️ Attention: If you force the tray into the slot, it can bend the contact springs inside the slot, in which case you will need repairs in the service center, since it is almost impossible to straighten the contacts yourself.

• 🔄 Upside down SIM-Map: Contacts should be downward, and the bevelled angle should match the tag on the tray. If you put the card upside down, the phone won't see it.
• 📏 Incomplete insertion of the tray: If the tray does not snap to the end, SIM-The card will periodically "disappear." Make sure the tray is sitting flushed with the body.
• 🔋 Installation with the phone on: Although Xiaomi 11T It supports hot replacement, it's better to turn off the device, and in rare cases, this can cause the communication module to fail.
• 🪨 Use of inappropriate tools: pins, needles or knives can damage the tray extraction mechanism. Use only a paper clip or a brand key.

Another common problem is the conflict between the two. SIM-If one of the cards is running 4G, And the second one is just 2G, Check the Network Priority Settings:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose. SIM-map for which you want to change the settings.
3. Click Network Type and install 4G (recommended).

💡

After installation SIM-card phone stopped seeing the network, first of all check whether the flight mode is activated (aircraft icon in the status bar).

Setting up two SIM-maps: priorities and tariffs

Xiaomi 11T Supports the work with two physical SIM-Dual-SIM Dual Standby (Dual-SIM, DSDS). This means that both cards can be active at the same time, but only one of them will work in the same way. 4G-the second one is in the 2G/3G (depends on the operator).

To set priorities:

1. Open the Settings. → SIM-maps and mobile networks.
2. Choose dual SIM and mobile network.
3. Set the basic SIM for calls, SMS and mobile internet.
4. Set up Network Priority for each card (e.g. SIM1 – 4G, SIM2 – 3G).

When choosing rates for two SIMs, consider:

• 📞 Voice calls: If you want to take calls to both numbers at the same time, choose VoLTE-enabled carriers (e.g. MTS or MegaFon).
• 🌐 Internet: For maximum speed, set up the main SIM on 4G/5G, The second is for calls only.
• 💰 Savings: If the second SIM rarely needed, connect the tariff with payment upon use (for example, Tele2 "My conversation").

Please note that when you are actively calling on one SIM The second will not be available for calls (but SMS Some banking applications (e.g. Sberbank Online) may also require a specific link to the bank. SIM-map.

Compatibility: Which Xiaomi models have the same slot

If you’ve used other Xiaomi smartphones before, it’s helpful to know that the 11T slot design is similar to many 2021-2023 models.

If you are moving from an older model (like the Redmi Note 9), note that Xiaomi is a big seller. 11T There's no separate microSD slot, it's hybrid, which means you have to donate a second slot to use the memory card. SIM-card.

Frequent questions