How to insert it correctly SIM-Xiaomi 11 Lite card: instructions with photos and videos

Before you start, what you need to know about SIM-Maps in Xiaomi 11 Lite

Xiaomi 11 Lite (NE and 5G models) supports two nano-SIM cards or one nano-SIM + microSD card up to 1 TB. Important: the slot is hybrid - you can not use two SIM and microSD at the same time. The manufacturer recommends turning off power before installation, but in practice many users successfully insert cards on the phone on the phone on, the risk of damage to contacts is minimal, but it is better not to experiment.

Xiaomi model 11 Lite NE (codename lisa is equipped with a tray for SIM-The cards on the right, next to the power button. 11 Lite 5G (The renoir code is similar. Both versions support 5G (if the operator provides such a service, but for stable operation it is necessary to SIM Older cards without this feature may not be registered on networks 4G/5G.

If you're switching from a different brand phone, check the SIM format: Xiaomi 11 Lite only works with nano-SIM (12.3 × 8.8 mm). Micro-SIM or mini-SIM standard cards need to be trimmed or replaced from the operator. The use of adapters is not recommended - they can get stuck in the slot or damage contacts.

What? SIM-Choose a map for Xiaomi 11 Lite

Not all. SIM-The cards work equally well with Xiaomi 11 Lite. The best option is nano-SIM from the operator with support:

• 📶 VoLTE (voice communication through the 4G) — Without it, calls can be interrupted when switching between networks;
• ⚡ 5G (if your tariff supports - for maximum Internet speed;
• 🔄 Dual Standby – The ability to hold two SIM-cards in standby mode (but only one will be active for data).

Modern operators (MTS, Beeline, Television)2, MegaFon) issue universal cards nano/micro/mini In the same holder, if you have an old one. SIM, It can be replaced for free in the communication room for 5–10 Please note that when you change the number is saved, but may reset the settings of the mobile Internet (APN). You will have to reconfigure them in the Settings menu. → SIM-maps and mobile networks → Access points (APN).

If you plan to use two SIM-maps, consider the limitations:

⚠️ Note: If after installing two SIM-The mobile Internet stopped working, check the priority of the network in the settings. By default, the data is transmitted only through the first one. SIM (slot 1. To change this, go to Settings → SIM-maps and mobile networks → Transfer data and select the desired card.

Step-by-step instruction: how to insert SIM-map to Xiaomi 11 Lite

The installation process takes less than a minute, but requires care.

• 📱 Xiaomi 11 Lite Smartphone (NE or 5G);
• 🔑 Paperclip or special key for extracting the tray (comes complete);
• 📇 Nano-SIM card (or two if you plan to use dual-SIM) SIM).

If the key is not available, an unbended paperclip or toothpick will do, the main thing is not to use sharp objects (needles, pins) so as not to damage the locking mechanism of the tray.

Turn off your phone (recommended, but not required)

Check the SIM format (should be nano)

Prepare a paper clip or key

Make sure you're on SIM No scratches or contamination-->

Step 1: Removing the tray for SIM-map

The tray is on the right end of the phone, next to the power button, to remove it:

1. Insert the paperclip into a small hole next to the tray.
2. Press with force - the tray should jump 1-2 mm.
3. Carefully pull the tray over yourself and get it out completely.

If the tray doesn't come out, don't use excessive force - check if the paper clip is skewed. In the Xiaomi 11 Lite, the locking mechanism is plastic and can be broken when rough.

Step 2: Installation SIM-map

The tray has two nests:

• 📱 Slot 1 (closer to the edge of the tray) - the main, supports 5G VoLTE;
• 📱 Slot 2 — Additional, it only works on networks 2G/3G/4G (without 5G).

Put it down. SIM-The card(s) in the tray contacts down, aligning the bevelled corner of the card with the angle of the nest. If you install a microSD, it should occupy slot 2 (instead of the second one). SIM). The memory card can be inserted in only one position - do not confuse the side.

Step 3: Return the tray to the phone

Carefully insert the tray back into the smartphone before the click. Make sure it sits straight - if the tray is skewed, SIM-The cards will not be recognized after installation:

1. Turn on the phone (if it was turned off).
2. Wait for the network indicator to appear (usually 10–30 seconds).
3. If there is no network, restart the device.

💡

After installation SIM-The phone can't see the network, try manually selecting the operator. → SIM-maps and mobile networks → Select the network and click "Network Search".

Frequent mistakes and their solutions

Even with the right installation SIM-These are the most common situations and ways to fix them:

1.The phone doesn't see. SIM-map

Causes and solutions:

• 🔌 Bad contact – take out the tray and check if it is flat SIM. Wash your card and phone contacts with dry cloth;
• 📵 Inactive SIM — You may not have activated the card from the operator;
• 🔄 If it doesn't work, reset your network settings to Settings. → System system → Resetting settings → Resetting Wi-Fi, Mobile Network and Bluetooth.

2. No mobile Internet

If the network indicator is available, but the Internet does not work:

1. Check the balance and activity of the tariff;
2. Make sure that mobile data is included in the notification curtain.
3. Set up APN manually (options can be taken from the operator’s website).

💡

If your mobile internet is gone after resetting your network settings, check the APN settings. Often they are reset to standard ones that are not suitable for your carrier.

3.The phone asks PUK-code

That means that SIM-The card is blocked after three incorrect attempts to enter PIN. PUK-The code is on the plastic holder that came with the card:

• 📞 Call the operator (from another phone);
• 🌐 Find it. PUK in the personal account on the operator's website;
• 🏦 Contact the Salon of Communication with a Passport.

⚠️ Note: If you enter incorrectly 10 times PUK-code, SIM-The card will be permanently locked and you'll have to change it!

How to activate the second SIM-map

If you've set two SIM-map, but the second one is not defined:

1. Open the Settings. → SIM-maps and mobile networks;
2. Press the inactive SIM;
3. Turn on the "On" switch;
4. Set your priority for calls and SMS (if necessary).

Note that in Dual SIM mode, only one card can use mobile Internet.

1. Go to Settings. → SIM-maps and mobile networks → Transfer of data;
2. Select the desired SIM;
3. Confirm the switch.

If the second SIM is not registered on the network, check:

• 📶 Does the operator support the work in your area;
• 🔄 Are the settings in conflict? APN;
• 📵 Is the card blocked (for example, for non-payment).

Video instructions and additional materials

If the text instruction seems complicated, check out the official video from Xiaomi (available on YouTube):

Xiaomi 11 Lite NE – How to Insert SIM Card (Subtitles)

It is also useful to read:

• 📄 Official documentation of Xiaomi (section "SIM-map");
• 🛠️ Forum 4PDA (Xiaomi 11 Lite topic with problems);
• 📞 Xiaomi Support Service (phone: 8 800 700 05 50).

If you're afraid of damaging your phone, you should go to the service center. SIM-cards there usually do not exceed 200-300 rubles.

FAQ: Answers to Frequent Questions