How to enter the BIOS on Xiaomi Notebook Pro: all the ways and nuances

Xiaomi Notebook Pro laptops have gained popularity due to a combination of performance and affordable price, but they often have difficulty trying to log into the BIOS, the basic I/O system. Unlike most devices, where you just press F2 or Del when you boot, Xiaomi has its own peculiarities, due to the fast boot of Windows, optimized UEFI firmware and the lack of a traditional POST screen.

In this article you will find all the relevant ways to enter the BIOS For Xiaomi Notebook Pro models (including 2019, 2020, 2021 and 2022 versions), as well as solving typical problems - from "keyboard unresponsive" to "no Advanced point in Windows settings." + Reboot and alternative options for cases where the laptop refuses to boot.Special attention is paid to the unique key combination for Xiaomi (F2 + Power, which works even when the device is switched off.

Why the standard methods don’t work on Xiaomi Notebook Pro

The main problem when trying to log into the BIOS on Xiaomi devices is the lack of visual feedback when pressing the keys. Unlike Lenovo or HP laptops, where the manufacturer’s logo and prompt are displayed when downloading (for example, Press F2 for Setup), the Xiaomi Notebook Pro screen remains black until Windows fully boots.

• 🔹 Fast Boot (Fast Boot) – a function UEFI, skipping the self-testing stage (POST) and initialization of the keyboard.
• 🔹 Lack of legacy downloads – modern Xiaomi models are used exclusively UEFI, What changes the logic of entering the settings.
• 🔹 Optimized firmware - the manufacturer hides some options BIOS to simplify the interface, which complicates access to advanced settings.

In addition, on some models (for example, Xiaomi Notebook Pro X 15) the keyboard may not respond to pressing until the drivers are fully loaded, making it impossible to use hotkeys (F2, Del, Esc).

Method 1: Sign in via Windows settings (for a running system)

If your Xiaomi laptop is loading properly in Windows 10 or 11, the most reliable way to log into the BIOS is to use the built-in system settings, which bypasses the problem with the broken keyboard during the boot phase and is guaranteed to work on all Notebook Pro models.

1. Open the Start menu and select Settings (cog icon).
2. Go to the Update and Security section → Recovery.
3. In the Special Download Options block, click Reboot Now.
4. After the reboot, select: Diagnostics → Additional settings → UEFI embedded software settings.
5. Click Reboot – the laptop will automatically log into the BIOS.

This works even if you have a keyboard disabled or function keys not responding, but there is a caveat: some firmware may not have UEFI embedded software settings, in which case you can try updating the BIOS (instruction below) or using alternative methods.

Method 2: Hot keys when booting (for power users)

The traditional method of entry into BIOS It works on Xiaomi Notebook Pro with the help of keys, but requires exact adherence to the sequence of actions. The main difficulty is to have time to press the key in a limited period of time (about the time of the key). 1-2 seconds before you start loading Windows.

For most Xiaomi models, the following combinations are relevant:

• 🔘 F2 — keyboard BIOS (It works on 80% of devices).
• 🔘 Del is an alternative, less likely to work.
• 🔘 F2 + Power is a unique combination for Xiaomi: pinch F2 And hold it, then press the power button. F2, until the screen comes out. BIOS.

Important: If you have an external keyboard connected, try pressing the keys on it — sometimes the built-in keyboard doesn't initialize quickly enough. Also make sure the laptop isn't connected to a dock or hub — this can block the signals from the keys.

Method 3: Emergency login via resetting (if the laptop doesn't boot)

If the Xiaomi Notebook Pro doesn’t boot into Windows (for example, after a failed update or crash) and the BIOS login keys don’t work, you can use a hardware reset, which is suitable for power users, as it requires disassembling the laptop.

Instructions for CMOS discharge:

1. Turn off the laptop and disconnect the power cable.
2. Turn the device over and remove the bottom cover (a cross screwdriver will be required).
3. Find the CR2032 battery (silver round element) on the motherboard.
4. Carefully remove the battery for 10-15 minutes, then set back.
5. Collect a laptop and turn it on – the BIOS will reset to factory settings and you can log in via F2.

⚠️ Note: On some Xiaomi Notebook Pro models (e.g, 2022 battery CMOS It can be soldered to a board, in which case the reset is done by closing the contacts. CLR_CMOS (Look for the inscription next to the battery) screwdriver on 5–10 Don't touch the other parts of the board, it can cause a short circuit!

💡

If after resetting the CMOS laptop does not turn on, check the connection of the keyboard plume - it could disconnect during disassembly.

Method 4: Update the BIOS as a way to unlock access

If none of these methods worked, the problem may lie in outdated or damaged firmware BIOS. Updating the firmware not only adds new features, but often restores access to UEFI settings. For Xiaomi Notebook Pro, the current firmware can be downloaded on the official Xiaomi website (Support → Notebook → Your model).

Step-by-step instructions for updating:

1. Download the archive with the firmware and unpack it.
2. Connect your laptop to charge (required!).
3. Launch the *.exe file on behalf of the administrator.
4. Follow the update wizard's instructions. The laptop will reboot several times.
5. After the update, try logging into the BIOS via F2 or Windows settings.

⚠️ Note: Do not interrupt the update process BIOS And don't turn off the laptop, which can cause permanent damage to the motherboard, and if you have a power failure during the upgrade, you can only restore the device with a programmer in the service center.

After a successful update, check the BIOS version in the System Information menu (press Win + R, type msinfo32).

• 📌 Xiaomi Notebook Pro 15.6" (2019) - 1.07.00 or later.
• 📌 Xiaomi Notebook Pro X 15 (2021) – 1.12.00 or later.

💡

BIOS updates are a last resort: If your laptop is stable, don’t update your firmware unnecessarily, which could lead to a loss of warranty or new bugs.

Problem Solving: Frequent Errors and Corrections

Even following the instructions, Xiaomi Notebook Pro users often face typical problems when trying to log in to the BIOS. Let’s consider the most common cases and ways to fix them.

Problem 1: Laptop does not respond to F2/Del keys

Reasons:

• 🔌 Fast Boot disables keyboard support during the phase POST.
• 🔌 Connected conflict USB-devices (mouse, external storage device).
• 🔌 Damaged keyboard firmware (relevant for 2020–2021 models.).

Decisions:

1. Turn it off. USB-devices and try again.
2. Use the F2 + Power combination (hold on to F2 until the Xiaomi logo appears).
3. Update the BIOS (see previous section).

Problem 2: Windows does not have the option "UEFI embedded software settings"

This means that:

• 🔹 You have an outdated version of Windows (upgrade to the latest build).
• 🔹 BIOS Manufacturer blocked (relevant for some corporate models).
• 🔹 Laptop is in Secure Boot mode with access options disabled.

Solution: Try logging in via Shift + Reboot (hold Shift when you click on "Reboot" in the Start menu), then select UEFI Firmware Settings. If there is no option, update the BIOS or reset the CMOS.

Problem 3: After resetting CMOS, the laptop does not turn on

Probable reasons:

• 🔋 Incorrect battery connection CMOS (pleus).
• 🔋 Disconnected keyboard plume or power button.
• 🔋 Failure of firmware due to a sharp power outage.

Solution: Take the laptop apart again and check:

1. The density of the CMOS battery (contacts must be clean).
2. Connect the keyboard plume and power button.
3. Availability of charging indication when connecting the power supply.

FAQ: Frequent questions about BIOS on Xiaomi Notebook Pro