How to increase the speed of the scooter Xiaomi 365 Pro: from firmware to upgrade iron

Xiaomi Mi Electric Scooter 365 Pro

25 km/h

Scooter acceleration is always a compromise between performance and safety

In this article, we'll look at 7 working methods for speeding up, from software to hardware. You'll learn how to get around firmware limitations, what parts can be replaced to increase power, and what overclocking can do for the battery and controller. Importantly, some methods require technical skills, and the wrong actions can disable warranties or even disable the scooter. If you're a beginner, start with the safest options.

Is it worth the candle? It depends on your goals. You can do 25 km/h in the factory for daily commutes, but if you like extreme driving or if you're in the race, then tuning is justified. The rule is, make any modifications at your own risk.

1. Update of firmware: official and custom versions

The easiest way to overclock the Xiaomi 365 Pro is to change the firmware. The manufacturer artificially limits speed for security reasons, but enthusiasts have long learned to bypass these restrictions. There are two ways: official updates (rarely increase) and custom firmware (risky, but effective).

Xiaomi's official firmware sometimes improves overclocking dynamics, but never removes the speed limit. It's worth installing them first, in case you're lucky with optimization. Check the current version in the Mi Home app (Devices section). → Scooter settings → Software Update: If a new version is available, upgrade.

Here are custom firmware (e.g. ScooterHacking Utility or ScooterHacking Utility). M365 DownG allows:

• 🚀 Remove the speed limit to 30-35 km / h (depending on the modification)
• 🔋 Optimize battery consumption at high speeds
• ⚡ Increase engine efficiency (but this reduces battery life)
• 🛠️ Set up regenerative braking

⚠️ Warning: Installing unofficial software will void the warranty and may cause unstable operation of the controller!

2. setting parameters through the application (without firmware)

Not everyone knows, but even without hacking the firmware, you can slightly increase the speed by changing the settings in the proprietary Mi Home application or alternative utilities like M365 Tools: These methods won't give you the same boost as custom software, but they're safe to guarantee.

Here's what we can do:

• 🔄 Turn off Eco mode, it artificially limits power. Switch to Sport in the scooter settings.
• 📉 Reduce the level KERS (Regenerative braking – this will reduce resistance during acceleration.
• 🔋 Calibrate the battery – sometimes incorrect charge data leads to a power drop.

In the annex M365 Tools (available for Android) has additional options:

• 🛠️ Increase motor current (Motor Current) – but this reduces battery life.
• 📊 Change the acceleration curve - the scooter will gain speed faster.

⚠️ Attention: Excessive increase in motor current can cause the controller to overheat!

Download Mi Home or M365 Tools|

Connect the scooter to Bluetooth|

Check the current version of the firmware|

Take screenshots of current settings (in case of resetting)-->

Replacement of tires or wheels: the effect on speed

The diameter and type of wheels directly affect top speed. The Xiaomi 365 Pro (8.5 inches) is not designed for speeds above 25 km/h, it wears out quickly and can burst. But if you want to accelerate, consider these options:

✅ Cutless slicks (e.g. Kenda) K193 or innova):

✅ Larger diameter wheels (e.g. 10 inches):

• 📏 Increase clearance and passability.
• 🔄 Change the gear ratio → Scooter accelerates more slowly, but the maximum speed grows.
• ⚠️ Requires the wings to be reworked (may rub).

❌ What can't be done:

• 🔥 Install wheels with a deep tread - they are very slow.
• 🚫 Use worn rubber - the risk of rupture at high speed.

Modification of the controller: risks and opportunities

The controller is the "brain" of the scooter that controls the power of the motor.The Xiaomi 365 Pro factory controller is limited to the level of the engine. 500W, It can be replaced by a more powerful one (for example, a 800W or 1000W). This will give an increase in speed to 35-40 km / h, but there are nuances:

✅ The advantages of upgrading the controller:

❌ Cons and risks:

• 🔥 Overheating – standard cooling is not designed for high power.
• 💥 Risk of fire when connecting incorrectly.
• 🔋 Rapid battery wear – high load reduces battery life.

🔧 Which controller to choose?

The following are the best options for Xiaomi 365 Pro:

⚠️ Note: After replacing the controller, check the:

• Compatible with your version of the firmware.
• Quality of soldering compounds (poor contact) = short-circuit).
• Body temperature after 10 minutes of driving at maximum speed.

5. Battery boost: more volts = speed

The speed of an electric scooter depends on the battery voltage. Xiaomi 365 Pro is equipped with a battery 36V, But you can replace it with 48V or 52V — This will increase speed by 20-30% without changing the controller.

🔋 Battery upgrade options:

• 🔄 Replacement of cells – instead of the original 18650, a more capacious 21700 is installed (for example, Samsung). 50E).
• 🔌 Additional battery – connect in parallel or sequentially (but this requires improvement) BMS).
• 🔋 Completed kits 48V — For example, from Wayne or Minimotors (suitable for Xiaomi with minimal modifications).

⚠️ What to consider:

• 🔧 Compatibility with controller – not all models support 48V.
• 📏 Dimensions - a battery of greater voltage may not fit into the regular case.
• 💰 Cost - high-quality battery will cost 15-30 thousand rubles.

📊 Battery comparison for Xiaomi 365 Pro:

💡

Before replacing the battery, check it for cell balancing with a multimeter. 0.1V — Otherwise, the risk of fire increases significantly.

6. Weight optimization and aerodynamics

The lighter the scooter, the less energy is spent on acceleration, and a weight loss of 2-3 kg can give you a speed gain of 1-2 km / h without any modifications.

✂️ How to reduce weight:

• 🚲 Remove unnecessary accessories (such as a basket or trunk).
• 🔧 Replace standard wings with carbon fiber (easier by 300-500 g).
• 🔋 Use a lightweight battery (e.g., lithium polymer instead of lithium-ion).

🌬️ Aerodynamics (relevant for speeds above 30 km/h):

• 🏍️ Install a windscreen - reduces air resistance.
• 👕 Driving in tight clothes (yes, it affects you!).
• 🛴 Getting down when you’re running is like riding a bicycle.

📉 What won't help:

• ❌ Shortening of the steering wheel - the impact is minimal.
• ❌ Replacement of bearings (if not worn out).

💡

Each extra kilogram on the scooter reduces the maximum speed of the ~0.3–0.5 km/h If your weight is more than 90 kg, it becomes more difficult to accelerate above 30 km/h – you will have to modify the engine or battery.

7. Alternative methods: what else can you try

If the previous methods didn’t work, there are a few other non-standard solutions, which are less popular, but sometimes help to squeeze the last kilometers of the Xiaomi 365 Pro out of the hour.

🔧 Unusual ways of dispersing:

⚠️ Extreme methods (for experienced only!):

• 🔥 Ringing shunts on the battery - increases current, but the risk of fire is extremely high.
• ⚡ Connecting two batteries in series (72V) — It requires a complete electronics redesign.

💡 Advice for those who do not want to take risks:

If you want speeds above 30 km/h but are not ready to modify the scooter, consider buying a more powerful model, such as:

• Xiaomi Pro 2 (up to 28 km/h, but better depreciation).
• Ninebot Max G30 (up to 30 km/h, larger battery).
• Dualtron Spider (up to 60 km / h, but the price is from 120 thousand rubles).

FAQ: Frequent questions about the overclocking of Xiaomi 365 Pro