How to install and configure Xiaomi mouse: instructions for beginners and experienced users

Xiaomi’s wireless mice have gained popularity with a combination of affordable prices, stylish design and advanced features. However, even with such a simple device, users often have questions about how to connect a mouse to a computer, what to do if it does not work, or how to set up additional buttons.

We will look not only at basic models like Xiaomi Mi Wireless Mouse or Xiaomi Mi Bluetooth Mouse 2, but also at more advanced options with support for multi-device connectivity (for example, Xiaomi Mi Dual Mode Wireless Mouse), pay special attention to typical errors that interfere with proper operation, and give practical tips for increasing battery life.

If you’ve just purchased a Xiaomi mouse or are planning to, bookmark this article, and here you’ll find answers to 90% of the questions that arise when you first connect and continue to use it.

1.Preparation for connection: what to check before starting

Before you start connecting, make sure all components are in place and the devices are compatible. In the box with the mouse Xiaomi should be:

• 🖱️ The wireless mouse itself.
• 📶 USB-receiver (for models with radio frequency connection)
• 🔋 Battery or battery (depending on model)
• 📄 Brief instruction (often in several languages but without Russian)

If you don't have at least one of these items, you should contact the seller.

• 🔍 Compatible with your OS: Most Xiaomi mice run Windows 7/8/10/11, macOS 10.12+ Android 5.0+, But for full functionality, it may be necessary to install drivers.
• 🔋 Battery charge: if the mouse does not turn on, connect it to the charge on the 10-15 minutes (for models with built-in battery).
• 📱 Bluetooth availability: For Bluetooth-connected models (such as Mi Bluetooth Mouse 2), make sure your PC or laptop supports Bluetooth 4.0+.

⚠️ Note: Xiaomi Mice with Dual Mode support (e.g. Mi Dual Mode Wireless Mouse) can connect via Bluetooth or via the Wireless Mouse USB-The first one is the receiver, but not the same one.

If you connect your mouse to a MacBook or iMac, please note that some models may require additional customization in System Settings. → Bluetooth.For example, for Mi Bluetooth Mouse 2, you sometimes need to manually confirm the pairing.

2. Xiaomi Mouse Connection Ways: Step-by-step instructions

Depending on the model, Xiaomi mice support one or more connectivity options. Let's look at each in detail.

2.1 Connection through USB-receiver (2.4 GHz)

This is the most reliable and energy efficient way, as it does not require constant pairing, suitable for most models, including the Mi Wireless Mouse and Mi Dual Mode Wireless Mouse.

1. Put it in. USB-receiver to the free port of the computer. USB 2.0 (black color), because USB 3.0 (blue) can cause interference.
2. Turn on the mouse using a switch on the bottom panel (usually signed). ON/OFF).
3. Press the pairing button (most often it is hidden under the cover of the battery compartment or marked with an icon). ↻).
4. Wait until the mouse indicator stops blinking and lights up constantly (usually takes a lot of time). 3-5 seconds).

If the mouse doesn't work:

• 🔄 Restart your computer with a connected receiver.
• 🔌 Try another one. USB-port (avoid hubs).
• 🗑️ Remove other mice from Device Manager (in Windows) to avoid conflicts.

2.2 Connection via Bluetooth

This is a versatile method, but it may require more power, and is suitable for Mi Bluetooth Mouse 2, Mi Dual Mode Wireless Mouse and others with Bluetooth support.

For Windows 10/11:

1. Open Settings → Devices → Bluetooth and other devices.
2. Turn on Bluetooth and press Add Device → Bluetooth.
3. Hold the pairing button on the mouse (usually) 3-5 seconds) until the indicator flashes quickly.
4. Select Mi Bluetooth Mouse from the list of found devices.

For macOS:

1. Go to System Settings → Bluetooth.
2. Click Connect next to the mouse you find.
3. Confirm pairing if necessary (you may need to enter 0000 or 1234).

⚠️ Note: If the Xiaomi mouse is not detected by Bluetooth, try it: 🔄 Reboot the Bluetooth module (in Windows, this can be done through Device Manager). 📱 Remove the mouse from the list of associated devices and reconnect. 🔋 Check battery power – at a discharge below 10%, the Bluetooth connection can be unstable.

2.3 Connection to Android devices

Some Xiaomi mice (such as the Mi Bluetooth Mouse 2) can connect to Android smartphones or tablets, which is convenient for working with DeX Mode on Samsung or when connecting to the Xiaomi Pad.

Instructions:

1. Activate Bluetooth on your Android device.
2. Put the mouse in pairing mode (hold the button until the indicator flashes quickly).
3. In Bluetooth settings, select Mi Bluetooth Mouse.
4. Confirm the pairing (if necessary, enter the code 0000).

Once connected, the mouse will act as a pointer, but some gestures (such as horizontal scrolling) may not be supported.

3. Xiaomi Mouse Customization: Drivers, Buttons and Sensitivity

By default, the Xiaomi mouse will work with basic features, but for full use (for example, setting additional buttons or changing the buttons). DPI) You will need software.

Installation of official drivers

For most Xiaomi models, drivers are installed automatically through Windows Update. However, advanced features (such as Mi Dual Mode Wireless Mouse) may require manual installation:

1. Download the driver from the official Xiaomi website (Support section) → Downloads).
2. Unpack the archive and launch the Setup.exe file.
3. Follow the installation wizard’s instructions (usually just click Next several times).
4. Restart the computer.

For macOS, additional drivers are not usually required, but you can use utilities like SteerMouse or other tools. USB Overdrive for fine-tuning.

Sensitivity adjustment (DPI) and button

The sensitivity of the mouse is measured in DPI (Most Xiaomi models support switching between multiple levels (e.g., dots per inch, 800/1200/1600 DPI). To change this parameter:

• 🖱️ On the mouse itself: there is usually a special button under the wheel or on the side (click it to cyclically switch modes).
• 🖥️ In the driver: if you have installed software from Xiaomi, open the mouse control panel and select the desired value DPI.
• 🔧 In Windows settings: Parameters → Devices → Mouse. → Additional Mouse Parameters → Index parameters.

To set additional buttons (for example, side buttons or buttons under the thumb):

1. Open the control panel. → Equipment and sound → Mouse.
2. Go to the button or setting tab (depending on the model).
3. Assign an action to each button (e.g., Back, Go, Open Task Manager).

Xiaomi gesture-enabled mice (such as Mi Bluetooth Mouse 2) allow you to assign up to 5 different actions per touch, but this feature only works with official software.

Calibration of the wheel and elimination of squabbles

If the scroll wheel is not working smoothly or "jumps", try:

• 🧹 Clean the wheel of dust (use compressed air or a soft brush).
• 🔧 Calibrate in settings: Control Panel → Mouse. → Wheel parameters.
• 🔄 Update the wheel driver through Device Manager.

For models with silent buttons (such as the Mi Silent Wireless Mouse), rattles can occur due to wear and tear, in which case only a mouse replacement or repair in the service center will help.

💡

If the Xiaomi mouse is too fast to discharge, turn off the backlight (if any) and reduce the poll frequency in Bluetooth settings (for Windows: Control Panel) → Mouse. → Additionally. → Frequency of the survey).

Typical problems and their solutions

Even with quality devices, sometimes there are failures, and here are the most common problems and ways to fix them:

If the Xiaomi mouse is plugged in, but the cursor is moving with a delay, try:

• 🔌 Connect USB-port receiver on the back of the system unit (less interference).
• 📶 Switch from Bluetooth to radio frequency (if supported).
• 🔧 Disable the Device Manager setting Allow this device to be disabled to save energy.

⚠️ Note: If the Xiaomi mouse stopped working after the Windows update, try rolling back the driver: in Device Manager, find the mouse, right click → Properties → Driver. → This often helps in conflicts with new OS versions.

5. Comparison of popular Xiaomi mouse models

To choose the right model, compare the key characteristics of popular Xiaomi mice:

For office work, you should choose Mi Dual Mode Wireless Mouse - it is versatile and supports fast switching between devices. Mi Gaming Mouse (if it is in your region) with customizable DPI 7200.

If you’re interested in autonomy, look for models with built-in battery packs (like the Mi Bluetooth Mouse 2) – they last longer than battery-powered mice and don’t have to be bought all the time.

6.How to extend the life of the Xiaomi mouse

The average life of Xiaomi’s wireless mouse — 2-3 If you're using it properly, then you should follow these tips to extend this period:

• 🔋 Battery Charging: Do not leave your mouse on charge more 4 Use only the original cable (or a certified USB-Type-C). If the mouse has not been used for more than a month, drain the battery to the point where it is not used. 40-50% before storage.
• 🧼 Surface care: Wash the body with a soft cloth moistened in alcohol solution (at least 70%). Avoid getting moisture on the optical sensor. Use compressed air or cotton swab to clean the wheel.
• 📶 Operation: Do not drop the mouse - even from a height of 30 cm, it can damage the optical sensor. Avoid using it on glass or glossy surfaces (use a mat). If the mouse is not in use for a long time, turn it off with a switch.

For models with silent buttons (such as Mi Silent Wireless Mouse), avoid sharp presses, which leads to wear and tear of the mechanism. If the buttons become soft or double clicks spontaneously, it is time to change the mouse.

⚠️ Note: If the Xiaomi mouse stopped holding the charge (discharges for the battery) 1-2 Try to reset the battery controller: completely discharge the mouse, then charge it off during the day. 12 It helps in the hours. 60% case.

💡

Regular cleaning of the optical sensor (once in a week) 2-3 month) increases the accuracy of the mouse and prevents cursor jerks.

7.Alternative ways to use the Xiaomi mouse

Xiaomi mice can be used not only from PCs, but here are some non-obvious scenarios:

• 📺 Smart management TV: Connect your Bluetooth mouse to the Xiaomi Mi TV, Samsung Smart TV Android TV. It is convenient for surfing the Internet or using applications like Kodi.
• 📱 Tablet: Xiaomi mice are compatible with iPad (via Bluetooth) and Xiaomi Pad. Enable Mouse in Settings Special features → Mouse pointer (for iPad).
• 🎮 Game consoles: Some models (such as Mi Dual Mode Wireless Mouse) can be connected to Steam Deck or Nintendo Switch in Desktop Mode. PlayStation 5 or Xbox will require a Bluetooth adapter.

Use Raspberry Pi or other single board computers USB-Receiver (if included) Some Linux distributions (such as Ubuntu) may require manual driver installation:

sudo apt update


sudo apt install xserver-xorg-input-libinput

After restarting, the mouse must be determined automatically.

8.Where to buy Xiaomi mouse parts and accessories

If the Xiaomi mouse is out of order, you don't always have to buy a new one.

• 🛒 Official service centers: Addresses can be found on the Xiaomi Support website.Warranty repair usually takes 5-7 days.
• 🌍 Online stores: AliExpress, Banggood - here are sold batteries, USB-Receivers and buttons. Battery cost for Mi Bluetooth Mouse 2 — near 500-800 ruble.
• 🔧 Self-repair: A screwdriver will be required to replace buttons or clean the encoder of the wheel T5 YouTube has demolitions of most models (see Xiaomi Mouse Disassembly on request).

If you lost USB-You can buy a universal nano receiver (for example, Logitech Unifying), but it may not support all the functions of the Xiaomi mouse.

💡

Before buying a Xiaomi mouse battery, check its capacity. For example, the Mi Bluetooth Mouse 2 requires a 10440 battery. 3.7V, Mi Dual Mode Wireless Mouse – 103450 3.7V. Capacity mismatch will reduce operating time.

Frequently Asked Questions (FAQ)