Residual image on Xiaomi: how to eliminate burn-in on the screen

The screen of your Xiaomi TV Or did the Mi Desktop Monitor start displaying pale contours of channel logos, taskbars, or static interface elements even after they have disappeared? OLED- some LCD-And unlike physical defects in the matrix, this effect can be reduced or even eliminated -- but only if you do it right.

In this article, we will analyze 7 proven methods of fighting burn-in on Xiaomi devices – from software tricks to hardware solutions, and also explain why some “people’s” tips (like rubbing the screen with alcohol) are not only useless, but also dangerous. You will learn how to diagnose the problem, what settings in MIUI TV This will help prevent the defect from reappearing, and when to contact the service center. OLED-screens (e.g. Xiaomi) TV OLED 65" or Mi" TV Master OLED), where the risk of burn-in is higher due to the peculiarities of the technology.

What is a residual image and why does it appear on Xiaomi?

The term burn-in (literally, “burning”) describes the phenomenon where static image elements (such as a channel logo, control panel, or game indicators) are “imprinted” into the screen matrix and remain visible even after changing the content. LCD-The panels are usually temporary (image persistence) and OLED — often irreversible damage to organic LEDs.

The main reasons for the appearance of burn-in on Xiaomi devices:

• 📺 Long-term display of static elements: channel logos, HUD In games, taskbars (especially on the MIUI TV permanent-bottom).
• ⚡ High screen brightness: at maximum (200)+ nitrogen OLED degrade faster.
• ⏳ Life of the matrix: after 2-3 years of intensive use, the risk of burn-in increases (especially on the basis of the use of the system). OLED 2018–2020 release).
• 🔄 No prevention: no screensavers, disabled Pixel Refresh (if available in the model).

Nana LCD-Xiaomi TVs (e.g. Mi TVs) TV 4S or Redmi Smart TV) The residual image is more often temporary and is associated with the charge of liquid crystals. OLED (Xiaomi models TV OLED or Mi TV Master is a physical degradation of pixels, and it can be completely eliminated only by replacing the matrix.

⚠️ Warning: If colored spots (red, green or blue) appear on the screen, rather than pale contours, it is not burn-in, but broken pixels or a backlight defect!

How to Diagnose Residual Images on Xiaomi TV

Before trying to fix burn-in, make sure the problem really exists. Often users confuse the residual image with:

• 🔍 Dirt on the screen (dust, fingerprints).
• 📶 Artifacts HDMI-cable (check another cable or signal source).
• 🎨 Incorrect color settings (e.g. Dynamic Contrast mode enabled).

For accurate diagnosis:

1. Turn on the TV a uniform color background (gray, red, green, blue). MIUI TV This can be done through the Settings menu. → Display. → Color test.
2. If the contours of logos or text are visible on a homogeneous background, it is burn-in.
3. Take a picture of the screen on your phone in a dark room: the defect will be more noticeable in the photo.

Nana OLED-Xiaomi TVs for diagnosis can use a hidden service menu:

Press sequentially on the remote:


Menu → 1 → 9 → 6 → 9 → Menu




Select "Panel Test" → "Uniformity"

Method 1: Programming burn-in compensation (for OLED)

Modern. OLED-Xiaomi TVs (e.g. Xiaomi) TV OLED 65" or Mi" TV Master OLED) They have a built-in burn-in compensation function that automatically adjusts the brightness of the burnt-out pixels to manually run it:

1. Open Settings → Display → Additional settings.
2. Find Pixel Refresh or Panel Care (name depends on the model).
3. Select Start Compensation. It takes 10 to 30 minutes, and the TV will restart.

This function works on the principle of equalization of brightness: it slightly mutes the “healthy” pixels to visually smooth out the contrast with the burnt out. It can not completely eliminate burn-in, but makes it less noticeable.

⚠️ Note: Do not run compensation more than 1 time per month - this accelerates the wear of the matrix. On some Xiaomi models, the feature is only available after 1000 hours of operation.

Disconnect all external devices (configures, receivers)

Make sure the TV is connected to a stable power source.

Do not press the remote buttons during the process.

After completion, let the TV cool down for 10-15 minutes.-->

Method 2: The white noise cycle LCD-screen

If you LCD-Xiaomi TV (e.g. Mi TV) TV 4S or Redmi Smart TV X Series, the temporary residual image can be eliminated with dynamic content, best suited for white noise or fast-changing colors.

Instructions:

1. Find a video on YouTube with white noise (for example, the video is a video of white noise, «LCD Screen Burn-in Fix»).
2. Turn on the video at maximum brightness (200 nits) and leave for 2-4 hours.
3. Change content periodically (e.g. switch between white, grey and black screens).

This method works by redistributing charge in liquid crystals, and to speed up the process, you can alternate:

• 🔄 Color screensavers (RGB-test).
• 📊 Gradient transitions (from black to white).
• 🎮 Dynamic games (e.g. races with frequent scenes).

💡

For the best effect, use HDMI-login from an external device (such as a laptop) – this will eliminate artifacts from Xiaomi’s built-in processor.

Method 3: Resetting color settings and calibration

Sometimes the residual image is amplified by incorrect color settings, such as the Dynamic Contrast mode on or the saturation overload can make burn-in more visible.

Settings → Display → Picture → Resetting image settings

After resetting manually adjust:

• 🔆 Brightness: not higher than 180 nits for OLED, 220 nits for LCD.
• 🎨 Contrast: 80–90% (at maximum burn-in is more noticeable).
• 🔄 Image Mode: Select Movie or Standard (not Vivid!).

Nana OLED-Xiaomi models are also useful to disable:

Settings → Display → Additional settings → Adaptive brightness (off)


Settings → Display → Additional settings → Local dimming (set on “Low”)

💡

Color Temperature: Warm helps hide burn-in by reducing the contrast of blue pixels, which burn out faster than others.

Method 4: Update firmware and service utilities

Manufacturers regularly release updates that improve burn-in compensation algorithms. TV OLED After 2021, the Pixel Orbiting feature was added – it slightly shifts static interface elements to prevent burnout.

How to update firmware:

1. Go to Settings → About TV → System Update.
2. If a new version is available, install it (requires a stable Internet connection).
3. After the update, reset the settings (Settings) → On TV. → Reset to factory).

For some Xiaomi models, there are service utilities from the manufacturer that allow you to manually run matrix tests. TV 4S You can use the Mi Service Tool app (available only for authorized service centers).

⚠️ Warning: Do not install firmware from third-party sites! this may result in the TV being blocked (activation of Anti-Rollback protection).

Method 5: Hardware solutions (for advanced users)

If the software methods didn't work, and burn-in is a big spoiler, you can try the hardware, which requires disassembling the TV and is only suitable for users with experience in electronics repair.

Option 1: Flashing EEPROM matrix

Some of them. LCD-Xiaomi panels (for example, models on Mstar or Realtek chips) can reset the calibration data of the matrix through the service port:

• 🔧 Programmer CH341A (500 ₽).
• 💾 dump EEPROM For your model (see the forums) 4PDA or BadCaps).
• 🔌 A soldering iron for connecting to contacts on the board.

Option 2: Replacement of the matrix

Nana OLED-Xiaomi TVs (e.g. Mi TVs) TV Master OLED) If you have a TV set for warranty, contact the service center - burn-in is considered a warranty case (provided that you did not violate the rules of operation).

⚠️ Attention: Disassembling Xiaomi TV voids warranty if there are seals on the case. OLED After 2022, the adhesive compounds of the matrix are used - reassembly without specialized equipment is almost impossible.

Method 6: Prevention of burn-in on Xiaomi TV

The best way to fight burn-in is to prevent it from happening, and the following steps will help to extend the life of the screen:

• ⏰ Use screensavers: set up automatic screen shutdown after 5-10 minutes of inactivity (Settings) → Energy conservation → Screensaver).
• 🔄 Alternate content: Avoid long-term viewing of channels with static logos (e.g. Channel One or Russia 24).
• 📉 Reduce the brightness: for OLED optimally 150-180 nits, for LCD — 200 nits.
• 🎮 Set up games: in games, turn off static elements HUD Or reduce their transparency.
• 🔄 Update the firmware: new versions MIUI TV Often contain improved burn-in protection algorithms.

Nana OLED-Xiaomi models are also useful:

• 🔄 Enable Pixel Shift (if available in the settings).
• 📺 Use Film Maker Mode for movies (less bright static elements).
• 🔋 Turn off the TV at night (not leave it on standby).

💡

For Xiaomi. TV Google TV (model 2023+ Install Screen Burn-In Tool from Play Market – it automatically shifts static interface elements.

When to contact the service center

If you have tried all the methods, but burn-in remained, it is time to contact the professionals.

• 🔧 OLED-screen with severe burnout (visible contours even on a gray background).
• 💥 Artifacts after firmware updates (such as stripes or flickering).
• ⚡ Problems with illumination (dark spots, uneven brightness).
• 📉 Warranty case (TV under 2 years old).

Xiaomi Service Center can offer:

• 🔧 Recalibration of the matrix (for LCD).
• 🔄 Replacement OLED-panels (for models under warranty).
• 💻 Diagnostics of the control board (sometimes burn-in is associated with a malfunction of the controller).

Cost of repair in unofficial services:

• LCD-TVs: 3,000 to 10,000 ₽ (cleaning, reflashing).
• OLED-TVs: 15,000-40,000 ₽ (matrix-replacement).

⚠️ Before visiting the service, take photos of the defect from different angles - this will help prove that the problem existed before the repair (in case of disputes).

FAQ: Frequent questions about burn-in on Xiaomi