How to install USB-Xiaomi driver: full instructions for Windows 7/10/11

Connecting Xiaomi smartphone to your computer through USB It often turns into a headache: the device is not detected, drivers are not installed, and the task manager appears yellow exclamation points. 90% of the time is due to the absence or incorrect operation. USB-It's a driver that's responsible for the interaction between Windows and the device, and without it, you can't flash your phone through Fastboot, unlock the bootloader, or even just transfer files in mode. MTP.

In this article, you will find the latest ways to install drivers for all Xiaomi models (including Redmi, POCO, Black Shark, regardless of Windows version. We will analyze manual and automatic installation, solving typical errors (codes 10, 28, 43) and give recommendations for choosing the right version of the software.

If you've tried to install a driver through MiFlash or a standard Windows wizard before, but you haven't been able to do it, don't give up. Often, the problem is solved by cleaning old drivers or disabling the digital signature, and we'll start by getting the system ready.

1. Preparation of the computer before installing the driver

Before installation USB-Xiaomi drivers need to follow several critical steps to avoid conflicts with existing software.Neglecting these actions often leads to errors such as “Device not recognized” (Code 43) or endless driver installation.

First, disable the antivirus (especially Avast, Kaspersky or Bitdefender) which blocks the installation of unsigned drivers, considering them potentially dangerous.

1. Open the settings. → Update and security → Windows security.
2. Choose Protection against Viruses and Threats → Managing settings.
3. Turn off the protection in real time.

Second, remove old drivers if they were installed earlier.

1. Connect Xiaomi to the PC.
2. Open Device Manager (Win + X → Device Manager).
3. Find in the list Other devices → Xiaomi (or) ADB Interface, Android Phone).
4. Right-click. → Remove the device → Check the box Remove driver programs for this device.

⚠️ Note: If Qualcomm is displayed in Device Manager HS-USB QDLoader 9008, which means the phone is in emergency mode (EDL). In this case, standard drivers will not work – you will need a separate QDLoader package.

Finally, download the current version of the drivers from the official source.

• 🔹 Xiaomi official website (Mi Unlock Tool section).
• 🔹 XDA Developers (for custom firmware).
• 🔹 Universal. ADB-Driver (if you need support for all Android devices).

Installation of the driver via MiFlash (official method)

The most reliable method is to use the MiFlash utility, which automatically installs all the necessary drivers to work with Xiaomi in Fastboot and Fastboot modes. EDL. This method is suitable for firmware, unlocking the loader and restoring “bricks».

Download the latest version of MiFlash from the official website (Mi Flash Tool section). At the time of writing, the current version is MiFlash 2023.4.1.

If after connecting the phone to Fastboot (a screen with a rabbit and the inscription Fastboot) the driver is not installed automatically:

1. Open Device Manager.
2. Find a device with a yellow icon (usually Android Bootloader Interface).
3. Right-click → Update the driver → Search for drivers on this computer.
4. Specify the path to the folder with the unpacked MiFlash (for example, C:\MiFlash\Driver).

Windows 11 may require disabling digital signature verification, as Xiaomi drivers are not Microsoft certified.

1. Restart your PC and hold the Shift when you start up. + F8 (call the recovery menu).
2. Select Troubleshooting and Finding → Additional settings → Download options → Reboot.
3. After restart, press. F7 (Disable mandatory driver signature verification).

⚠️ Note: If the Android Sooner Single is displayed in Device Manager after installing the driver ADB Interface, which means that the phone is determined in mode ADB, Reconnect the device by holding Vol-.

Manual installation of the driver through INF-file

If the automatic installation through MiFlash did not work, you can install the driver manually using an.inf file. This method is suitable for experienced users and requires accurate follow-up of the instructions.

First, download the driver archive for your Xiaomi model. 10 Pro will suit the package Xiaomi_Drivers_2026.zip (can be found 4PDA or XDA). Unpack the archive in a folder. C:\Xiaomi_Drivers.

Next, perform the following actions:

1. Connect your phone to your PC in Fastboot mode (press Power + Vol- when the device is off).
2. Open Device Manager and find a device with a yellow exclamation point (e.g., Xiaomi Composite). MDB Interface).
3. Right-click. → Update the driver → Search for drivers on this computer → Select a driver from the list of already installed.
4. Click Install from disk and specify the path to the file android_winusb.inf unpacked.
5. In the list, select Android Bootloader Interface (for Fastboot) or Android ADB Interface (for Interface) ADB).

If Windows gives an error, “This device cannot be installed because no drivers are found for it,” try the following:

• 🔹 Make sure you select the correct.inf file (for the purpose of the 64-discharge system needed android_winusb64.inf).
• 🔹 Try another one. USB-port (preferably) USB 2.0, because USB 3.0 sometimes conflicts).
• 🔹 Disconnect all other Android devices from your PC.

4. Solving common installation errors

Even after installing the driver correctly, users often encounter errors. Let's consider the most common problems and ways to fix them.

The error deserves special attention «MIUI Security Check, which appears when you try to unlock the bootloader, means that the phone has Mi Account protection on, and you need to continue:

• 🔹 Link the device to your Xiaomi account (in your phone settings).
• 🔹 Wait 72–168 hours after the binding (depending on the model).
• 🔹 Use the official Mi Unlock Tool (non-custom versions!).

If after all the manipulations the phone is still not identified in Fastboot, check if it is not in mode. EDL (Qualcomm 9008). in this case, you will need a special driver QDLoader and the utility MiFlashPro.

💡

Before you run through Fastboot, always check the driver version in Device Manager. If the Android Bootloader Interface displays Ports instead of "Android Bootloader Interface (COM & LPT)", This means that the phone has gone into mode. EDL, And further action may lead to a "brick".

5. Installation of drivers for mode EDL (Qualcomm 9008)

Regime. EDL (Emergency Download Mode is used to repair bricks or firmware of phones with a damaged system.In this mode, Xiaomi is defined as Qualcomm HS-USB QDLoader 9008 requires a separate driver.

Download the QDLoader driver with XDA Developers (search by QDLoader) HS-USB Installation is carried out in the standard way:

1. Unpack the archive with the driver.
2. Connect the phone in mode EDL (clamp+ + Vol- when connecting the cable).
3. In Device Manager, find Qualcomm HS-USB QDLoader 9008.
4. Update the driver by specifying the path to the unpacked folder.

After successful installation, you can use MiFlash or EDL Tool for firmware. Pay attention:

• 🔹 In mode. EDL The phone doesn’t turn on or respond to buttons – that’s okay.
• 🔹 Do not turn off the cable during firmware, this can lead to a complete failure of the device.
• 🔹 Some models (e.g. Redmi Note 8 Pro with Mediatek chip) require a separate driver. MTK USB.

⚠️ Attention: Firmware through EDL Without official permission, Xiaomi will block IMEI Use this method only as a last resort and have a backup of the data.

6. Checking the operability of the driver

After installing the driver, you need to make sure that it works correctly. To do this, perform the following checks:

1. Check in Device Manager:

- Connect your phone to Fastboot (Power) + Vol-).

Device Manager should display Android Bootloader Interface (without exclamation points).

2. Check through ADB/Fastboot:

- Open the Command Prompt (Win) + R → cmd).

- Enter the command:

fastboot devices

- If the driver is installed correctly, you will see the serial number of the device (for example, the driver is installed, 1234567890abcdef fastboot).

3. Verification of file transfers (MTP):

Connect your phone in normal mode (not Fastboot).

- In the phone settings, select File Transfer (MTP).

- A window with phone files should open on the PC.

If at least one of the points does not work, repeat the driver installation or try an alternative method (for example, through Zadig).

💡

The most reliable way to check the Fastboot driver is by the fastboot device command, and if it returns the serial number, the driver works correctly, and you can proceed to firmware or unlock.

7. Alternative ways to install drivers

If the standard methods don't work, we can use alternative tools. Let's look at two proven options.

Method 1: Zadig Zadig is a universal tool for installing WinUSB, libusb or libusbK drivers. It is useful if Windows refuses to accept standard Xiaomi drivers.

1. Download Zadig from the official website.
2. Connect your phone in Fastboot mode.
3. Run Zadig on behalf of the administrator.
4. In the drop-down list, select Android Bootloader Interface.
5. Press Install Driver (select the libusb-win32 or WinUSB).

Method 2: Universal Adb Driver

Universal. ADB-The driver is suitable for all Android devices, including Xiaomi, and its advantage is easy installation and compatibility with Windows 11.

1. Download the driver from GitHub.
2. Connect the phone in mode ADB (Turn on the debugging. USB developer-setting).
3. Start the installer and follow the instructions.

These methods are particularly useful if:

• 🔹 You are using Windows 11 with Driver Signature Check enabled.
• 🔹 Xiaomi’s standard drivers are in conflict with other Android devices.
• 🔹 You need to set up quickly. ADB debugging without unnecessary manipulation.

FAQ: Frequently Asked Questions