How to fold the treadmill Xiaomi: instructions with photos and storage tips

Xiaomi’s compact treadmills are the perfect home workout solution, but their key advantage – folding capability – is often a source of problems. Users are faced with jammed mechanisms, damaged rollers or incorrect position of the tape after unfolding. This article will help to avoid typical errors and teach you to fold the track without risk to mechanics, regardless of the model - whether it is WalkingPad. C1, KingSmith R1 Xiaomi Mi WalkingPad R2.

We'll take a look at not only the standard procedure, but also the nuances for different modifications, and we'll give you recommendations for long-term storage and maintenance of the mechanism, and if your track creaks when folded or doesn't lock up vertically, here's the solution.

Warning: improper folding with force can lead to deformation of the frame or failure of the engine mount bolts, especially for models with automatic folding system (for example, WalkingPad). X21), wherein the mechanism is sensitive to distortions.

In the article you will find:

• 🔧 Step-by-step instructions for manual and automatic models
• 📸 Visual diagrams and designations of key nodes
• ⚠️ List of dangerous errors and their consequences
• 🔄 Tips for preparing the path for folding (cleaning, lubrication)
• 📦 Recommendations for folded storage

1. Preparation of the treadmill for folding

Before you fold the track, it needs to be properly prepared, which will prevent damage to the tape, rollers and electronic components, starting with power outages — even if the model is battery-powered (like the WalkingPad). A1 Pro, it is better to completely remove the plug from the socket or turn off the battery.

Next, check:

• 🧹 Clean running tape. Dust and sweat mixed with lubricant form an abrasive layer that accelerates wear. Wipe the tape with a wet microfiber (no aggressive detergents!).
• 🛑 The position of the tape. It should be centered - if it is shifted to one of the edges, adjust the tension before folding (instruction below).
• 🔌 Condition of cables: models with remote control or touch panel (KingSmith) R2) The wires should not be stretched or twisted.

For models with automatic folding (for example, WalkingPad) X21) Make sure that, furthermore:

• 🔋 Battery charge not less than 30% (otherwise the mechanism may not work).
• 📱 There are no active errors in the mobile app (Mi Home or WalkingPad App) E01 or E03 block).

⚠️ Warning: If the track has been in use for more than 30 minutes, let it cool for 10-15 minutes.Overheating of the engine or controller can cause a failure when folding.

💡

For models with hydraulic shock absorbers (KingSmith) R1) Before folding, press down the frame 2-3 times - this will distribute the oil in the cylinders and facilitate the process.

2. Step-by-step instruction: how to fold a manual model (WalkingPad) C1, C2)

The handheld models are folded using a hydraulic mechanism and a hold. Here's a detailed algorithm:

Step 1. Unlock the lock.

On most models (WalkingPad) C1, C2) The locker is positioned sideways on the frame (usually on the right). Pull it up or on yourself (depending on the model) before clicking. In some versions, the locker can be hidden with a plastic plug — carefully put it with a screwdriver.

Step 2. Lift the frame.

Grab the main frame (not the handrails!) and pull smoothly over you. The track should start to rise.

• 🛠️ Check if the power cable is tightened.
• 💧 Hydraulic cylinder lubrication may be required (use silicone lubrication). WD-40 Specialist).

Step 3. Hold it in a vertical position

When the frame is raised to the end, snap the lock back. Make sure the track is stable - for this, there are often stabilization legs (for example, the WalkingPad). C2).

Power's out.|Locker unlocked.|The tape is centered.|No foreign objects under the frame|Cables are not stretched.-->

Automatic folding: electric-powered models (X21, R2)

Electrically driven models (WalkingPad) X21, KingSmith R2) They can be folded by the push of a button or by the app, but even here, there are nuances:

Method 1. Through a button on the body

Press and hold the button. Fold/Unfold (usually placed on the front panel) during 3 The track will start folding automatically if the process is interrupted:

• 🔋 Check the battery charge (minimum 30%).
• 📱 Make sure there are no errors in the app (codes) E01 — engine-lock, E03 — tilt-sensor).

Method 2. Through the Mi Home app

⚠️ Warning: If the track starts to fold but stops halfway, don't try to help with your hands.This can knock the position sensor calibration. Instead, restart the device (turn off/on power) and try again.

For models with touch control (KingSmith) R2) folding can be activated by gesture - swipe your finger up the touch panel and hold for 2 seconds.

4.Typical mistakes and how to avoid them

Even experienced users sometimes make mistakes that lead to breakdowns.

A particularly dangerous mistake is the use of force, for example, if a hydraulic cylinder is jammed, many people try to "help" with a leg or a hammer, which leads to:

• 🔧 Benign guide (replacement cost up to 50% of the price of the track).
• ⚡ Breaking wires inside the frame (a frequent problem with WalkingPad) A1).

If the track does not add up, first check:

1. Are there any foreign objects under the tape (coins, keys, etc.)?
2. Does the process block an error in the application (check notifications in Mi Home).
3. Does the inclination sensor need to be calibrated (instruction in section 6).

💡

If the track creaks when folding, this is the first sign of a lack of lubrication. Use only silicone compounds (for example, use silicone compounds, CRC 2-26), not WD-40 purely!

5. How to store a folded treadmill

Improper storage can lead to tape deformation, corrosion of metal parts or failure of electronics.

1. Selection of seat

• 🏠 Temperature: from +5°C +30°C. Avoid balconies or garages in winter – freezing lubricants damages the mechanism.
• 💧 Humidity: not higher than 60%. If humidity is higher, use moisture absorbers (for example, silica gel bags).
• ☀️ Direct sunlight: causes plastic to burn out and tape to dry out. Cover with a case of breathable cloth.

Storage status

Ideally - vertical, but if there is little space, you can store horizontally, observing the conditions:

• 📏 Put a soft mat under the frame (so that the floor does not scratch).
• 🔄 Once a month, scroll the tape manually (to avoid deformation).
• 🔋 For models with a battery (WalkingPad) A1 Pro) turn on every 3 months for 10 minutes to maintain the charge.

Additional measures

For long-term storage (more than 6 months):

• 🛢️ Lubricate rollers and guides (use Lithium Lubricant Litol)-24).
• 📄 Keep a copy of the warranty card - if stored incorrectly, the service center may refuse repairs.

💡

If you keep the track folded for more than a month, check the tension of the tape before the next use. To do this, raise it in the middle - the gap should be no more than 2-3 cm. If more, you need adjustment.

Adjustment and maintenance after folding

After you lay out the track, you can have problems, like the tape rolls over, you get vibrations or you get errors on the display, and here's how to fix it.

1. Centering of the tape

If the tape is shifted:

1. Turn off the track and disconnect the power.
2. Find adjusting bolts on the back roller (usually marked with red or yellow tags).
3. Turn the bolt on. 1/4 turn clockwise (if the tape moved to the left) or against (if to the right).
4. Check the centering by turning on the track at minimum speed.

Calibration of the inclination sensor (for automatic models)

If the path is not folding or makes a mistake E03:

1. Make sure it is on a level surface (use the level).
2. In the Mi Home app, go to Settings → Sizing.
3. Follow the instructions on the screen (usually press the button and wait for the beep).

3. Elimination of vibration

Vibration during operation can be caused by:

• 🔧 Uneven tape tension (adjust bolts as described above).
• 🔋 Wear rollers (replacement required, average cost – 1,500–2,500) ₽).
• 🏗️ Uneven floor (use a rubber mat 5-10 mm thick).

⚠️ Note: If the track is made to make an error E01 (engine lock, don't try to reset it by switching it on/off multiple times. This can cause the power transistor on the controller board to burn out.

7. Models with non-standard folding mechanisms

Some Xiaomi models have unique designs that require a special approach:

WalkingPad A1 Pro (with battery)

KingSmith R1 (hydraulic-dampered)

Xiaomi Mi WalkingPad (without handrails)

For models with a magnetic fixator (WalkingPad) C2) Check the strength of the magnets, if they're weak, the track can spontaneously decompose, and then you need to replace the magnetic latches. WP-MAG-001).

FAQ: Frequent questions about folding Xiaomi treadmills