Disassembly of Xiaomi tripod: a complete guide with photos and expert advice

Xiaomi tripods are popular accessories for smartphones, action cameras and cameras, but even they sometimes require disassembly: for cleaning, replacing damaged parts or upgrading. However, the design of the brand’s tripods has features that are important to consider so as not to break the mechanism or lose small details. In this article, we will discuss in detail the process of disassembling all major models – from the budget Xiaomi Mi Selfie Stick Tripod to the professional Xiaomi Mijia Tripod Pro – with an emphasis on hidden mounts, typical errors and ways to avoid breakdowns.

Before you start, consider that disassembling a Xiaomi tripod can void the warranty (if it is still valid).In addition, some models have indissoluble nodes with adhesive joints that can not be dismantled without damage, we will tell you how to determine such a design in advance and what to do in such cases.

Preparation: security tools and measures

To disassemble the Xiaomi tripod, you will need:

• ✅ Set of screwdrivers (cross-cross-haul) PH0/PH1, flat SL2.0)
• ✅ Plastic blades (for unscratching latches)
• ✅ Tweezers (to extract small springs and balls)
• ✅ Silicone mat (so that the details don't roll over)
• ✅ WD-40 or alcohol (to clean threaded joints)
• ✅ Fryer (to soften glue, if required)

Important: Don’t use metal tools to separate plastic parts, it will lead to chips. If the screws are “stook”, moisten them with alcohol and wait 5-10 minutes. Also prepare containers for sorting parts (for example, plastic trays for fishing baits) – this will simplify reverse assembly.

⚠️ Note: In tripods Xiaomi Mi Tripod 2 and Mijia Pocket Tripod used screws with a non-standard head (such as the original version). Y0.6). If you don’t have such a tool, don’t try to put a knife on them – buy a smartphone repair kit.

Definition of the tripod model and its features

Xiaomi tripod design varies depending on the model, and the following are key differences that affect the disassembly process:

For a precise model definition, look at the sticker under the tripod head or in the documentation. If the tripod was purchased a long time ago, check it by serial number through the official Xiaomi website - this will help you find the original parts.

💡

If your Xiaomi tripod doesn’t understand the standard ways, try searching for video demolition of your model on YouTube with the hashtag #XiaomiTripodTeardown. Often enthusiasts find unique solutions for specific modifications.

Step-by-step disassembly: universal instruction

This guide is suitable for most Xiaomi models, but check the table above before you start – your tripod may need a special approach.

1. Head Dismount: Unscrew the tripod head (if it is threaded) counterclockwise. In quick-removal models (Mijia Tripod Pro), press the lock (usually on the side) and pull the head up. If the mount is magnetic (Mijia Pocket Tripod), use a plastic blade to gently fit the body.
2. Leg separation: At the base of the tripod, find a locking ring (often hidden by a rubber pad). Push it with a spatula and remove it. After that, the legs can be pulled from the central node. In models with telescopic legs (Mi Tripod 2), pre-unscrew the locking screws on each segment.
3. Central shaft removal: Inside the central tube is usually a spring mechanism or shock absorber. Carefully remove it by holding the tripod vertically so as not to lose balls or springs. In the Mijia Tripod Pro, the shaft is attached to two screws under the head - they need to be unscrewed first.

Check the integrity of all springs and balls|

Make sure that the sleeves are clean.|

Apply lubrication to rubbing parts|

Take a picture of the details before disassembly-->

⚠️ Note: In the Xiaomi Mi Tripod 2 tripods, the center shaft is connected to the legs through plastic bushings. If they are cracked, do not try to repair them - replace them with the original ones (article). MDY-007-XM).

Disassembly of specific models: nuances

Some Xiaomi tripods have unique design solutions, and let's take a closer look at them.

Xiaomi Mijia Tripod Pro: quick-removal head and carbon legs

The main challenge of this model is the plastic latches in the head attachment mechanism, which often break when you disassemble it in a careless manner.

1. Press the lock and hold it.
2. Turn the head on 15.° counterclockwise, it takes the load off the latch.
3. Pull the head up carefully without making any effort.

Carbon legs are attached to the central node through aluminum bushings, which can only be removed after the locking ring is removed (use the locking ring). PH1 screwdriver).

Xiaomi Mijia Pocket Tripod: Magnetic Connections

This model is the hardest to understand because of the hidden magnets in the hinges.

1. Heat the hair dryer hinge to 50-60°C (this will loosen the glue).
2. Put a plastic blade on the top of the body.
3. Remove the magnets with tweezers and fold them in pairs (they are polarized!).

When reverse assembled, use cyanoacrylate adhesive (such as Loctite 401) to fix the magnets.

Cleaning and lubrication of machinery

After disassembly, be sure to clean all the parts of dust and old lubricant.

• 🧹 Soft brush (to remove dust from the grooves)
• 🧴 Isopropyl alcohol (for degreasing metal parts)
• 🛢️ Silicone lubricant (for plastic and rubber parts)
• 🔧 Lithium lubrication (for threaded joints)

Pay particular attention to:

• 🔄 The legs should be rotated smoothly, without creaking.
• 🔩 threaded joints – apply lubrication in a thin layer to avoid corrosion.
• 🧲 Magnetic fasteners – wipe them with alcohol to remove metal dust.

Don't use it. WD-40 For plastic, it corrodes some polymers. For plastic parts, a soap solution is better.

💡

After cleaning, be sure to dry the parts for 1-2 hours, the humidity inside the mechanism will lead to corrosion and jamming.

Typical breakdowns and repair methods

Xiaomi trips most often fail for the following reasons:

If you are not sure about the cause of the breakdown, make a diagnosis of the symptoms:

• 🔊 Screaming while driving → pivot.
• 🤏 No legs to spread out. → a locking ring or a spring breaks.
• 📉 Tripod falls under load → magneto-carving.

To replace parts, look for original parts on AliExpress or Xiaomi service centers — 3D-Printing plastic elements (model files can be found on Thingiverse at Xiaomi Tripod replacement parts request).

Build a tripod: the procedure and verification

You need to collect a tripod in reverse order, but there are several critical points:

1. Spring mechanism: Make sure that the spring in the central shaft is installed with turns down (otherwise it will cling to the walls).
2. Magnets: In the Mijia Pocket Tripod, set them so that the polarity coincides (north pole to north pole).
3. Threaded joints: Tighten the screws with a force of 0.5-0.8 N·m (use a dynamometer screwdriver, if any).

After assembly, check:

• ✅ Stability of the tripod on a flat surface.
• ✅ Smoothness of all hinges.
• ✅ Fixing the head under load (hang the load 200-300 g).

⚠️ Note: If the legs of the Xiaomi Mi Tripod 2 do not fix after assembly, check the plastic bushings - they may have deformed. MDY-008-XM).

💡

After repair, give the tripod "to work hard": 2-3 times completely spread out and fold the legs so that the lubricant is evenly distributed.

FAQ: Answers to Frequent Questions