Owners of Xiaomi’s portable acoustics often face the need to maintain the device after the warranty period ends. The most common problem is the degradation of the lithium polymer battery, which leads to a sharp reduction in battery life, and users may experience wheezing speakers or damage to the charging connector, which requires intervention inside the case.
Self-disassembly of the Xiaomi soundbar is a process that requires accuracy, the right tools and an understanding of the design of the gadget. Unlike smartphones, there are no standard screws in sight, and the body is often assembled on powerful adhesives to ensure moisture protection and monolithicity. Wrong actions can lead to damage to the plumes or rupture of the speaker membrane.
In this article, we will take a detailed look at the algorithm for safely opening popular models such as Xiaomi Mi Soundbar or Redmi TV Soundbar. You will learn how to heat the glue, what screwdrivers you will need and how not to damage fragile plastic latches during dismantling.
Tools and workplace preparation required
Before you start dismantling, you need to prepare a specialized tool, and the standard set of home screwdrivers will not work here, because the design uses small diameter screws with different types of screws. You need a set of precision screwdrivers, including cross PH00 and PH0, as well as flat slits with a width of 1-2 mm.
A critical element is a heater. The glue used in the assembly of Xiaomi acoustic systems polymerizes at high temperatures and softens only when heated to 80-90 degrees. A professional hair dryer or thermal separation platform is ideal for this. The use of household hair dryers is often inefficient due to low air flow temperature.
- 🛠️ A set of precision screwdrivers with magnetic tips.
- 🔥 Dryer for electronics repair or thermoplatform.
- 🎴 Plastic mediators and screen suction cup.
- 🧤 Antistatic gloves and dielectric-coated tweezers.
⚠️ Warning: Never use metal blades or knives to pick the case near the battery.Puncture of the lithium battery will cause instant fire and toxic smoke.
Organize the workspace so that all the small screws are not lost, and it is recommended to use a magnetic mat or container with cells, marking each stage of unscrewing, this will avoid a situation where after assembly there are unnecessary parts.
☑️ Preparation for disassembly
Algorithm of safe opening of the body
The process of disassembling the Xiaomi soundbar begins with a visual inspection of the end parts of the device. In most models, the main mount screws are hidden under decorative rubber pads or stubs in the area of USB and AUX ports. Carefully tuck them into a thin tool and extract.
After removing the visible screws, the main body remains held together by internal latches and adhesive layer around the perimeter. Heat the device ends evenly, moving the hair dryer along the seam for 2-3 minutes. Do not hold it in one point for too long so as not to melt the plastic or damage the display matrix, if present.
Use a thin plastic mediator or a special spatula to enter the junction between the front panel and the main body. Move slowly, cutting through the adhesive layer. If you feel strong resistance, stop pulling and warm up the area again. A sharp movement can break the plastic fixtures, which then have to be repaired with glue.
💡
Warm up the body in stages, first one short side, then the long side, which will keep the heat in the adhesive layer and facilitate the separation process.
Pay special attention to the control button connection loops. Even if the case has already moved away, don't open it completely until you make sure there are no connections inside. In Xiaomi Soundbar models, the buttons are often displayed on a separate board connected by a thin plume to the main motherboard.
Dismantling of essential components and electronics
When you successfully remove the front panel or open the case, you'll see the interior layout, the main board with the Bluetooth processor and module takes center stage, and often the speakers or battery require dismantling of the board, and it's screwed to a metal frame or plastic chassis.
The first step is always to turn off the battery. Find the battery connector to the board and gently disconnect it with a plastic tool. This will turn off the device and protect you from short circuits when working with other components. In some models, the battery can be additionally glued to the case with double-sided tape.
| Component | Type of attachment | Risks in dismantling |
|---|---|---|
| Battery | Adhesive tape + connector | Bloating, ignition at puncture |
| Dynamics | Screws + Glue | Membrane rupture, wire break |
| Management fee | Screws + plumes | Damage to contact tracks |
| Buttons | Trail + Latches | Thin plume break |
When removing speakers, be extremely careful with the wires. They are often soldered directly to the board or connected through very small connectors. If the speaker is glued, use a minimum amount of isopropyl alcohol to soften the glue, but make sure that the liquid does not get onto the electronic components.
Secrets of working with plumes
Replace the battery and eliminate typical malfunctions
The most common reason for disassembly is to change the power source, and if your soundbar stops holding the charge or shuts down immediately after disconnecting from the mains, most likely, the battery life is exhausted. The new battery must have the same dimensions and voltage as the original, usually these are elements like Li-Po with a voltage of 3.7V.
To replace, carefully remove the residues of old adhesive from the landing site. Apply new strips of double-sided electronics tape. Connect the new battery connector to the board before final assembly of the case to immediately check the system's health. Make sure the device turns on and displays the charge level correctly.
If the problem was the speaker's wheezing, check the diffuser for mechanical damage. Sometimes the extraneous sound is caused by debris getting into the housing or peeling off the edge of the speaker, in such cases, it is enough to clean the insides or gently glue the departed edge with a special elastic glue.
After the component is replaced, do the initial test. Don't rush to close the case permanently. Connect the device to charge and check if the indication is coming. Play the test track to make sure there is no background noise and stable operation of the Bluetooth module.
Assembly of the device and checking leakage
The final step is reverse assembly. Make sure all screws are twisted with the same force, but without fanaticism, so as not to break the thread in the plastic seats. The plumes should be tightly fixed in the connectors, and the locking bars lowered to their original position.
To restore tightness and fix the body, use a special adhesive B-7000 or E-8000. Apply a thin, uniform strip of glue around the perimeter of the joint. Avoid getting glue into the device, on speakers or into connectors. Connect the parts of the body and tightly press them against each other.
⚠️ Warning: Complete polymerization of the adhesive takes 12 to 24 hours. Do not turn the device on or load it immediately after gluing, so as not to disturb the geometry of the case.
After drying the adhesive, wipe the body with a soft cloth to remove the residue of the adhesive. Check all buttons and ports. If everything is functioning correctly, the process of disassembling the Xiaomi soundbar can be considered successfully completed.
💡
Quality assembly depends not only on the twisted screws, but also on the correct application of glue and stacking of plumes so that they do not clamped with the body.