Building a modern TV, especially with a large screen size, requires not only care, but also compliance with certain technical nuances that are often missed by users when first familiarizing themselves with the device. Xiaomi Mi TV 4A 43 is very popular due to the ratio of price and quality, but the process of installing regular support legs raises many questions for buyers who are afraid of damaging a fragile matrix or misallocating the weight of the device. Incorrect installation of the stand can lead to shaky design, cracks on the body or even fall of equipment, so it is important to clearly follow the algorithm of actions.
In this article, we will discuss the process of installing supports in detail, paying special attention to the specific features of the mounts of this particular series of TVs, where the screws often hide in non-standard places, and the direction of twisting may differ from usual. You will learn what tools you will need for safe assembly, how to not confuse the left and right leg, and also get answers to frequently asked questions that will help avoid typical errors when installing your new TV in the first place.
Preparation of the workplace and check of completeness
Before you start physically installing the supports, you need to prepare a safe space that will protect the screen from accidental scratches or impacts. The ideal option is a large table covered with soft cloth, or using the original packaging of foam in which the TV was supplied to the store, as it perfectly repeats the contours of the device. Make sure that there is enough lighting in the room so that you can clearly see all the holes and markings on the case, since in the dark it is easy to miss important details of the structure.
Open the accessories box and carefully check for all the necessary components specified in the manufacturer's instructions.Combined with the Xiaomi Mi TV 4A 43 usually comes two support legs (left and right), a set of screws for their mounting, as well as a remote control and network cable. It is critical to make sure that the number of screws corresponds to the number of holes, and they do not have visible thread damage, which can complicate the assembly process.
You will need a minimum set of tools to work, which is not usually included in the basic equipment, so it is worth preparing it in advance. Most often, a medium-sized cross screwdriver (PH2) is enough, but in some cases a flat screwdriver can also be useful for neatly fitting the plugs if they are present on the case. Do not use electric screwdrivers at high speeds, as excessive force can disrupt the threads in the plastic linings of the TV body.
⚠️ Warning: Never put your TV screen down on a hard surface without a protective pad, as even a microscopic grain of sand can push the matrix and leave an irreparable image defect.
Specific design of the stand Xiaomi 4A 43
The stand design for the Xiaomi 4A 43 has its own engineering features that distinguish it from the older or flagship models of the brand. The supports are made of durable plastic with a metal inner frame for stability, but the mounting points to the TV body are not symmetrically located relative to the center, but with a shift to the edges for optimal load distribution. This means that the left and right legs are not interchangeable, and trying to install them mirror will lead to the inability of screws into the landing holes.
Special attention should be paid to the system of fixing screws, which in this model is implemented through the side holes in the body of the stand. Unlike televisions, where screws are screwed from the bottom or top, here the fastener is made horizontally through special technological windows hidden in the depths of the support structure.
Why aren't the legs symmetrical?
The materials used to make the legs are designed to last a long time, but they are sensitive to temperature changes. If your TV just arrived from a cold warehouse or store in the winter, let it lie at room temperature for several hours before assembly, which will allow the plastic to acquire the necessary elasticity and reduce the risk of microcracks when fasteners are tightened.
Step-by-step instructions for installing supports
The installation process begins with the TV being positioned correctly: put it down on a prepared soft surface, making sure nothing is pressing on the matrix. Take one of the supporting legs and inspect it carefully for the "L" (Left) and "R" (Right) markings, which are usually applied to the inside of the plastic or sticker-like, and combine the leg with the corresponding end of the bottom of the TV, pressing it tightly against the body so that the mounting holes on the stand and on the TV fit perfectly.
☑️ Pre-spin check
Insert the screw into the hole on the side of the leg and start gently screwing it into the TV body, observing the perpendicularity of the input of the tool. Do not make excessive efforts at the initial stage: if the screw is tight, check the angle of inclination, as the thread should come smoothly and without creaking. Twisting the screw to the end, but stop at the moment when you feel confident resistance, so as not to break the plastic and not break the thread, then repeat the procedure for the second screw on the same leg.
Do the same with the second support, making sure you're using the right side of the device. After you've fixed both legs, try gently swaying the TV from side to side (without lifting) to check for structural stability and no backlashes. If you notice one of the legs not fitting tightly or wobbling, loosen the screws, adjust the support position and tighten them again, controlling the force.
⚠️ WARNING: When screwing your TV in, hold it with your second hand or ask your assistant to hold the body to avoid moving the device and the instrument falling on the screen.
Alternative fastening options and VESA
If you don’t like the regular legs or you plan to install a TV on the wall, the Xiaomi Mi TV 4A 43 model is equipped with a standard VESA mounting interface. The distance between the mounting holes on the rear panel is 200x200 mm, which allows you to use most of the universal brackets available on the market. When using wall mounting, regular legs are not needed and installation is not required, which also frees the lower part of the body from unnecessary elements.
To install on the bracket, you will need to remove plastic plugs (if any) or simply use holes that are often open and accessible immediately after unpacking. It is important to use screws that come with the bracket, since their length and diameter of threads may differ from those intended for legs. VESA guarantees compatibility, but the length of the screws must be selected so that they do not rest on the internal components of the TV.
💡
When buying a wall bracket, choose models with the function of “anti-vor” and the level of inclination – this will simplify the connection of cables and improve the view.
There are also universal center-support stands that attach to the VESA interface and allow the TV to be placed in the middle of the cabinet, which may be aesthetically more attractive for some interiors. When choosing this alternative, make sure that the weight of the TV (which is about 8 kg without packaging) does not exceed the maximum permissible load specified by the manufacturer of the stand.
Common Errors and How to Resolve Them
One of the most common mistakes is to try to twist the screws without first pressing the leg tightly against the body, which leads to a skew and a gap between the support plastic and the TV, which not only looks unaesthetic, but also creates a point of tension in the plastic, which over time can lead to cracks under the weight of the device. If you notice a gap after a tightening, the procedure must be reworked by loosening the screws and re-fitting the parts.
Another common problem is the loss or tangle of screws, especially if the house has other Xiaomi devices or other brands of equipment with similar fasteners.The screws from Xiaomi 4A 43 have a specific length and pitch of threads, and using inappropriate analogues can damage the seats.Always keep the original fastener in a separate package and sign it if you plan to use the TV on a temporary basis or transport it.
| Problem. | Probable cause | Decision |
|---|---|---|
| The leg is wobbling. | Not completely screwed. | Pull the fastener with a screwdriver |
| Gap between leg and body | Skewing | Weaken the screws, pressed tighter, twisted again |
| The screw doesn't enter the hole. | Not the same carving or angle | Check the L/R marking, change the angle of entry |
| Touching screech | Friction of plastic on plastic | Plug the joint with a thin layer of fetra or paint tape |
Maintenance and safety of anchorages
After a successful installation of the TV, it is recommended to periodically check the condition of the mounts, especially if the device is on an imperfectly flat surface or in a vibration zone (for example, near the speakers or the door). Plastic can eventually undergo what is called "creeping" under constant load, so it makes sense to carefully check the tightening of the screws every six months and, if necessary, tighten them a little, this is a simple preventive measure that will prolong the life of the supports and protect the device from falling.
When cleaning the dust around the legs, avoid using aggressive chemicals that can dissolve plastic or wash away the markings. Use a dry or slightly moist microfiber to wipe surfaces. Never try to lubricate the connection of the legs to the oil or silicone body, as this can lead to slippage of the structure and reduce the stability of the TV.
If you are planning to move or transport a TV, we strongly advise you to remove the legs and pack them separately in an original box or a reliable container.Transporting a TV with installed legs significantly increases the risk of damage to both the supports themselves and the lower end of the body from accidental impacts or vibrations in transport.
💡
Regular check of screw tightening and careful transportation with the legs removed is the key to a long and safe operation of your Xiaomi TV.