How to see IMEI Xiaomi Redmi Note 7: All working methods

Xiaomi Redmi Note 7 — One of the most popular smartphones of the brand, but even after the release of users face the need to recognize it IMEI. This unique identifier is useful for unlocking after reset, checking for originality or restoring communication. IMEI can be found 2-3 Click, on the Redmi Note 7 there are nuances: for example, the absence of a slot under the second SIM card in some versions or the “flying” code after firmware.

In this article, we will discuss 5 proven ways to find out IMEI Xiaomi Redmi Note 7 – from standard (through settings and USSD-code to "hidden" (disassembling the case or reading from the box). IMEI It doesn't show how to restore it after it's reset to factory settings, and why some devices show two codes instead of one. IMEI This will help you avoid buying a “gray” phone with a cloned ID.

What is IMEI and why is it needed on Xiaomi Redmi Note 7?

IMEI (International Mobile Equipment Identity is a 15-digit unique code that is assigned to each mobile device during the manufacturing phase:

• 🔒 Identification of the device in the operator's network. IMEI Smartphone will not be able to connect to cellular communication (calls, SMS, mobile).
• 🛡️ Theft protection, operators can block a stolen phone IMEI, rendering it useless to the thief.
• 🔧 Diagnostics and repairs. Service centers use IMEI to verify the guarantee and originality of details.
• 📦 Authentication control. IMEI You can check if the Redmi Note 7 is fake (especially for hand-built devices).

Xiaomi Redmi Note 7 IMEI It can be one or two, depending on the modification of the device:

• 📱 Single-Simplitude Version (Redmi Note 7 without the Pro in some regions) – 1 IMEI.
• 📱📱 Two-sim version (Redmi Note 7 Pro or standard model with Dual support) SIM) — 2 IMEI (one-on-one).

Important: If your phone supports two SIM cards, but only shows one IMEI, This may indicate a software failure or firmware replacement.

⚠️ Note: Redmi Note 7 with custom firmware (for example, LineageOS or Pixel Experience) IMEI It can fly off after an update, in which case you will need to restore through Engineer Mode or flash the original software.

Method 1: We'll find out IMEI through USSD-code (the fastest method)

This is a universal method that works on any smartphone, including the Xiaomi Redmi Note 7. Just enter a special command in the phone app:

1. Open the phone application (pipe icon).
2. Go to the keyboard tab (if the last calls have opened).
3. Enter the code: *#06#.
4. Press the call button (green tube).

Through 1-2 A window will appear on the screen with IMEI. If you have a two-sim model, two codes will be indicated: IMEI 1 (first SIM card) and IMEI 2 (The second SIM card works even without it. SIM-maps and Internet connections.

Check if the keyboard is locked.

Make sure you enter the code correctly (star-to-grating-zero-six-grating)

Restart your phone and try again.

Try entering the code through another call app (like Google Phone)

-->

If nothing happens after entering the code or if an error occurs, it may mean:

• 🔄 Failure in firmware (especially if the phone was flashed unofficial software).
• 📵 No communication module (for example, if the modem burns down after falling).
• 🔒 Blocking by the operator (if the phone is blacklisted by the operator) IMEI).

Method 2: Viewing IMEI phone-setting

If USSD-The code for some reason didn’t work, you can find it. IMEI It's a little longer, but it's just as reliable:

1. Open the "Settings" (cog icon).
2. Go to the About Phone section (at the bottom of the list).
3. Tap on All Features (or General Information in some versions) MIUI).
4. Scroll down to the block. IMEI — There will be one or two codes.

On the Redmi Note 7 with MIUI 12 and newer path may be slightly different: Settings → The phone. → Device data → Status. If you don't find a section, search by settings (the magnifier icon at the top of the screen) and type in the query "IMEI".

💡

If the settings are displayed IMEI As 000000000000000000 or Unknown, that means that the code was erased after a failed firmware, in which case only recovery through Engineer Mode or flashing the original software will help.

Pay attention to the format of the display IMEI customized:

• 📌 Right. IMEI: 15 digits, such as 861234567890123.
• ❌ Wrong. IMEI: Less than 15 characters, letters, repeating zeros, or the word Invalid.

If the code is not displayed correctly, the phone may not catch the network or be blocked by the operator.

Method 3: IMEI on the box and under the battery (for physical inspection)

If the phone is not turned on or you want to check IMEI It's the original code, you can find it on the box or under the battery, and it's especially useful when you buy a used device to make sure that the seller hasn't swapped the box.

IMEI on the box

The original Xiaomi Redmi Note 7 box contains a sticker with two barcodes and text information. IMEI formatted:

IMEI1: 861234567890123


IMEI2: 861234567890124

The sticker is usually on the bottom of the box (where the serial number and model are indicated). IMEI This is a reason to doubt the originality of the device.

IMEI under the battery

In early installments of Redmi Note 7 IMEI It was duplicated on a sticker under a removable battery, but in most cases, the battery is not removable, and you'll need to get to the sticker:

1. Turn off the phone.
2. Remove the tray for SIM-cards (use a paper clip or special key).
3. Carefully tuck the back cover with a plastic spatula (risk of damaging the fingerprint plume!).
4. Remove the lid and find a sticker on the metal case under the battery.

⚠️ Warning: Disassembling the Redmi Note 7 without experience can damage the plume of the fingerprint scanner or antenna contacts.If you are not sure about your skills, you better use other methods of checking IMEI.

If IMEI on the box and under the battery do not match those displayed in the settings or code *#06#, this is a sign:

• 🔧 Substitution of the motherboard (for example, after repairs).
• 📦 Fake device (Cloned Redmi Note 7).
• 🖥️ The unofficial firmware that dropped the original IMEI.

Yeah, always.

No, I didn't know about that possibility.

I checked, but I didn’t know what the numbers meant.

Only if the seller has offered

-->

Method 4: Verification IMEI Engineer Mode (for experienced users)

Engineer Mode is a hidden settings section that lets you test the hardware of your phone, including the communications module. IMEI, But beware, if you do something wrong on this menu, you might lose communication or reset your settings.

To open Engineer Mode on the Redmi Note 7:

1. Open the phone app.
2. Enter the code: ##4636###.
3. In the menu that appears, select Phone Information (or Phone Information).
4. Scroll down to the block. IMEI — Both codes will be listed here (if the phone is two-sim phone).

If IMEI It is displayed as Null or Unknown, and can be restored:

1. In Engineer Mode, go to the tab DSDS Information (for two-symbol models).
2. Press. IMEI SV Repair (if such a clause exists).
3. Enter the original IMEI (You can take it from the box and confirm it.
4. Reboot the phone.

Important: Recovery IMEI It doesn't work on all firmware through Engineer Mode. IMEI again gone, most likely a problem in a damaged communication module (modem) or an unofficial firmware that blocks the recording IMEI into NVRAM.

Method 5: IMEI Verification through ADB (for PC)

If the phone does not turn on or does not respond to pressing, but is determined by a computer, you can learn IMEI through ADB (Android Debug Bridge.This method will require:

• 🖥️ A computer with installed Xiaomi drivers and ADB.
• 🔌 USB-cable (preferably original).
• 🔧 Included debugging by USB on the phone (if it is switched on).

Instructions:

1. Download and install Google’s Platform Tools (includes ADB).
2. Connect Redmi Note 7 to your PC and open the command line in the folder with ADB.
3. Enter the command: adb shell getprop gsm.baseband.imei For two-symbol models also check: adb shell getprop gsm.baseband.imei2
4. If the phone is not answering, try the command: adb shell service call iphonesubinfo 3

If ADB Error: Device Unauthorized or No Devices Found, follow the following steps:

• 🔄 Reconnect the phone by changing the mode USB file transfer (MTP).
• 🔒 On the phone confirm the permission to debug by USB (if the screen is working).
• 🔧 Install Xiaomi drivers manually through Device Manager (you can download on the official website).

💡

If ADB doesn't IMEI, But the phone is turning on, the problem is probably the firmware. Try resetting to factory settings via Recovery Mode. + Volume up when the phone is off).

What to do if IMEI Does not show or show an error

If none of the methods helped to find out IMEI, or instead of the code you see Null, 000000000000000000 or Invalid, the problem may be one of the following factors:

If you suspect that IMEI It was altered by fraudsters (e.g., when you buy a used phone), check its authenticity with a checksum. IMEI — This is a test symbol that's calculated using the Moon's algorithm:

1. Delete the last digit IMEI (There's 14 digits left).
2. Multiply every second digit by 2 (starting with the second).
3. Add all the numbers (if the result is two-digit, add the numbers together).
4. If the sum is multiple 10, the last digit IMEI If not, add a number to make it a multiple of 10.

Example IMEI 861234567890123:

• Remove the last digit: 86123456789012.
• Multiply every second digit: 812385127169014 → 1×2=2, 3×2=6, 5×2=10, 7×2=14, 9×2=18, 1×2=2.
• Folding: 8 + (2) + 3 + (6) + 5 + (1+0) + 7 + (1+4) + 9 + (0) + 1 + (4) + 2 = 50.
• 50 times 10 → The last digit should be 0. In our example, it is 3. → IMEI forged.

FAQ: Frequent questions about IMEI Xiaomi Redmi Note 7