How to use Xiaomi air grill: a step-by-step guide with photos and life hacks

The Xiaomi Mi Smart Air Fryer is a smart kitchen appliance that combines deep fryer, oven and grilling. With hot air technology, it allows you to cook meals with as little oil as possible, while preserving their taste and health, but for the device to work efficiently, it is important to properly set it up and operate it.

In this article, we will take a step-by-step guide to how to use Xiaomi aerogrills, from unpacking to cooking the first meals, how to choose the optimal mode, what temperatures to use for different products, how to avoid typical errors, and share secrets that will help to extend the life of the equipment.

If you have just purchased a Mi Smart Air Fryer or are planning to do so, this guide will be your reliable assistant. Even if you have not used such devices before, after reading this article you will be able to cook like a professional!

Unpacking and preparation of aerogrill for the first use

Before you start, you need to get the device ready, and start by unpacking, and you need to get the aerogrill out of the box and check the equipment.

• 🔌 The air grill itself with the lid
• 🍳 Basket for products (usually with non-stick coating)
• 📄 Instructions in Chinese/English (Russian version may not be available)
• 🔄 Removable grille or pallet for collecting fat
• 🔋 Power cable (in some models it is removable)

Before first use, be sure to rinse all removable parts (basket, grille, pallet) with warm water with a mild detergent. Do not use abrasive sponges - they can damage the non-stick coating. After washing, wipe the parts thoroughly dry.

Also check the integrity of the sealing gum on the lid – it should fit tightly so that hot air does not come out. If you notice damage, do not turn on the device and contact the Xiaomi service center.

⚠️ Warning: Never wash the main body of an air grill under running water! Just wipe it with a wet cloth. Getting water into the vents can cause a short circuit.

Connection and first activation

After preparation, you can connect the aerogrill to the mains. Make sure that the voltage in the socket meets the requirements of the device (usually 220-240V, 50/60 Hz). Put the plug into the socket, the power indicator will light up on the control panel.

On most Xiaomi models (such as the Mi Smart Air Fryer 3.5L or Mi Air Fryer Pro), control is carried out using a touchpad or mechanical buttons. When you first turn on, you may need to calibrate the device itself to determine the optimal settings.

To check the performance, perform a test run:

1. Press the power button.
2. Set the temperature at 180°C and the time is 5 minutes.
3. Close the lid and wait for the signal to complete.

If the aerogrill is heated and it's gone off without any errors, it's okay. Now you can start cooking.

Main regimes and their designation

Xiaomi Mi Smart Air Fryer supports several cooking modes, which differ in temperature and intensity of blowing.

Some models (such as the Mi Air Fryer Pro) are equipped with automatic programs for popular dishes. Just select the desired mode on the panel, and the device will set the temperature and time.

If your model supports connecting to the Mi Home app, you can control the aerogrill from your smartphone, select recipes, and track the cooking process.

💡

To ensure that the products do not stick to the basket, before laying it, slightly spray it with spray oil or use parchment paper with holes for air circulation.

Step-by-step: how to prepare the first dish

Let's take a look at the cooking process with the classic French fries, which will help you understand the principles of aerogrills.

Step 1: Preparation of products

• 🥔 Peel and chop the potatoes with straw (thickness) ~1cm).
• 💧 Soak the sliced potatoes in cold water on 20-30 minutes to remove excess starch.
• 🧂 Dry the potatoes with a paper towel and salt.
• 🛢️ Sprinkle a small amount of vegetable oil (1-2 spoonful).

Step 2. Set up the aerogrill

Set the following parameters:

Mode: Fritühr


Temperature: 180°C




Time: 15 minutes




Intensity of blowing: Medium (if there is an adjustment)

Step 3: Preparation

1. Distribute the potatoes in the basket in one layer, without overloading it (maximum 2/3 volume).
2. Close the lid and start the program.
3. After 7-8 minutes, shake the basket (or stir the potatoes with a spatula) so that it is evenly roasted.
4. Wait for the signal to end and check the readiness.

If the potatoes are not crispy enough, add another 2-3 minutes at 200°C.

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes that spoil the result or shorten the life of the aerogrill, and here are the most common ones:

• 🔥 Cart overload — if you put too many foods, the air will not circulate, and the dish will be cooked unevenly. 2/3 volume.
• 🌡️ Wrong temperature - too high a temperature can set food on fire outside, leaving it raw inside. 160-180°C, for baking — 140-160°C.
• 🕒 Ignoring stirring - unlike the oven, in aerogril products must be turned or shaken at least 1 time for cooking.
• 🚫 Use of metal objects – to avoid damaging the non-stick coating, use wooden or silicone blades.

Another common problem is the smell of plastic on first turn on. This is normal: new devices can smell within the first 2-3 uses. To eliminate the smell, run "idle" at 200°C for 10 minutes without products.

⚠️ Note: If the Xiaomi aerogrill (suddenly shuts down) and an error appears on the display E1 or E2, This could mean overheating or blocking the fan, disconnect the device from the mains for 15 minutes and check if the vents are closed.

Care and cleaning: how to extend the life of aerogrill

Regular cleaning not only maintains hygiene, but also prevents breakdowns. Here is a step-by-step algorithm for caring for the Mi Smart Air Fryer:

After each use:

• 🧽 Remove the basket and rinse it with warm water with a mild detergent.
• 🧻 Wipe the inner walls of the body with a wet sponge (without abrasives!).
• 🌬️ Make sure the ventilation holes are not clogged with fat or crumbs.

1 time a week:

• 🧼 Conduct a deep cleaning: soak removable parts in water with soda (2 tbsp. spoons per 1 liter of water) for 30 minutes.
• 🔍 Check the sealing gum on the lid - if necessary, wipe it with acetic solution (1: 1 with water).
• 🛠️ Check the heating element (if available) for the presence of sodium.

Specialized non-stick coatings (such as Topperr or Miele) can be used to remove persistent contaminants, but avoid chlorine-containing formulations.

Useful life hacks for experienced users

Once you have mastered the basic functions, you can move on to advanced techniques that will make cooking even more convenient:

• 🍗 Marinade in two stages: for juicy meat, first marinate it in an air grill at 60°C for 20 minutes, then roast at 180°C.
• 🥪 Multi-level cooking: Use additional grilles (if included) to cook multiple dishes at the same time.
• ⏱️ Delayed Start: If your model supports a timer, program the start of cooking in advance (e.g., to have dinner ready for your arrival from work).
• 🌶️ Smoking at home: Add a pinch of wood sawdust (pre-soaked) to the basket and cook at 100°C with open cover 5 minutes for light smoked aroma.

Important: Smart Cook models (such as the Mi Air Fryer Pro) can save your own recipes to your device memory, which will save you the need to manually adjust the temperature and time every time.

If you like to experiment, try to cook unusual dishes in Xiaomi aerogrilla: for example, soufflé (at 140 ° C in silicone form) or yogurt (in defrosting mode at 40 ° C).

💡

To prevent the products from burning, always preheat the aerogrill for 2-3 minutes. This is especially important for baking and dishes with dough.

FAQ: Answers to Frequent Questions