How to connect the keyboard Xiaomi: step-by-step instructions for all devices

Xiaomi wireless keyboards are a stylish and functional solution for working with smartphones, tablets, PCs and even smart TVs. However, their connection sometimes raises questions among users, especially if we are talking about the first models like the Mi Bluetooth Keyboard or the more modern Mi Wireless Keyboard Pro. In this article, we will discuss all possible ways of pairing, features of working with different devices and typical errors that prevent successful connection.

It's important to understand that the process can vary depending on the keyboard model and the type of device you're connecting it to, for example, Android and iOS smartphones use different protocols, and Mi TVs use different protocols. TV They require a separate setup, and we'll look at each case separately, so you can quickly navigate and avoid common problems.

If you have just purchased a Xiaomi keyboard or plan to do so, bookmark this article – it will come in handy not only for the first connection, but also for solving possible problems in the future.

1. Preparation of the Xiaomi keyboard for connection

Before you start pairing, make sure your keyboard is ready to go.Most Xiaomi models come in sleep mode, so you need to activate them first.

For this:

• 🔋 Turn on the keyboard with a physical switch (usually located on the side or back). In Mi Wireless Keyboard models, the power button can be combined with the pairing button.
• 🔄 If the keyboard has an indicator (LED), it should start blinking, which means that the device is in search mode. If the indicator is not on, press the pairing button for 3-5 seconds.
• 📱 Make sure that the device you are connecting the keyboard to is Bluetooth enabled (for wireless models) or USB-receiver is connected to the port (for keyboards with the USB-dongle).

Some models, such as Xiaomi Mi Bluetooth Keyboard 2, They allow you to connect up to three devices at once, and in this case, you use the Fn key combination to switch between them. + 1/2/3. If you connect the keyboard for the first time, it will automatically take the first slot.

2. Connecting the Xiaomi keyboard to a smartphone (Android and iOS)

The process of pairing with a phone is almost the same for both types of devices, but there are nuances worth knowing about.

For Android (MIUI, Stock Android, Samsung One UI etc.)

On Xiaomi smartphones with a shell MIUI algorithm is as simple as possible:

1. Open Settings → Bluetooth.
2. Activate Bluetooth if it is turned off.
3. In the list of available devices, find the name of your keyboard (for example, Mi Bluetooth Keyboard or Xiaomi Wireless). KB).
4. Press it and confirm the pairing.

Some of the scalings may require input PIN-It's usually 0000 or 1234. If the keyboard doesn't ask for the code, just wait for the message that you've successfully connected.

For iPhone and iPad (iOS)

On Apple devices, the process is slightly different:

1. Go to Settings → Bluetooth.
2. Make sure the keyboard is in pairing mode (blinking indicator).
3. In the list of devices, select your Xiaomi keyboard.
4. If you have a request to enter the code, use the keyboard to dial digits (they can appear on the iPhone screen).

Important: Some Xiaomi keyboard models may not work properly with iOS due to Bluetooth protocol features HID. If the keys don’t respond, try updating the keyboard firmware (if possible) or using it with Android devices.

3. Connection to a computer or laptop (Windows, macOS, Linux)

Xiaomi keyboards work great with PCs, but there are nuances depending on the operating system.

For Windows 10/11

Connection algorithm:

1. Open Settings → Devices → Bluetooth and other devices.
2. Click Add Bluetooth or another device.
3. Select Bluetooth.
4. In the list, find your keyboard and click on it.
5. Wait for the pairing to be completed.

If the keyboard doesn’t show up, try:

• 🔄 Reboot the Bluetooth adapter (disable/enable in Device Manager).
• 🔌 Connect the keyboard through USB-Dongle, if it comes with a kit (for example, for Mi Wireless Keyboard).
• 🔄 Update Bluetooth drivers through Device Manager.

For macOS

On a Mac, the process is even simpler:

1. Open System settings → Bluetooth.
2. Make sure the keyboard is in pairing mode.
3. Select it from the list and click Connect.

If the keyboard is connected but not working, check the Keyboard settings in System Settings – you may need to change the layout or disable conflicting keyboard shortcuts.

For Linux (Ubuntu, Mint, etc.)

In most Linux distributions, the connection is via Bluetooth Manager:

1. Open Settings → Bluetooth.
2. Press Add Device.
3. Select the keyboard and confirm the pairing.

If you have problems, install the Blueman package via the terminal:

sudo apt install blueman

And use it to manage Bluetooth devices.

The keyboard is also on in pairing mode|Bluetooth on PC activated|Bluetooth drivers updated|No interference from other wireless devices-->

4. Connect to a Xiaomi TV (Mi) TV, Mi Box)

Xiaomi keyboards can be connected to smart TVs brand, but there are features. TV Bluetooth support HID, Therefore, it is sometimes necessary to use USB-dongle.

Method 1: via Bluetooth (for supported models)

If your TV supports Bluetooth keyboard connectivity (e.g. Mi). TV 4S, Mi TV Q1 And newer, do the following:

1. Open Settings → Devices → Bluetooth.
2. Activate device search.
3. Select your keyboard from the list.
4. Confirm the pairing.

If the keyboard doesn’t show, try restarting the TV and trying again.

Method 2: Through USB-Dongle (for older models)

For non-Bluetooth TVs (e.g. Mi) TV 3 or Mi Box S):

1. Connect. USB-Dongle (combined with keyboard) to port USB TV-wise.
2. Turn on the keyboard – it should automatically connect.
3. If the keyboard is not working, check if your TV supports the keyboard. USB HID-device.

Some users have a problem when the keyboard is connected, but not all keys work.This is due to the limitations of the Mi firmware. TV. In this case, it will help to update the TV software or use the keyboard only for basic functions (text input, navigation).

5. Solving common connection problems

Even if you do the instructions correctly, you can get errors, and let's look at the most common ones and how to fix them.

If none of these methods worked, try resetting the keyboard to factory settings.

1. Turn off the keyboard.
2. Hold the Fn combination. + Esc + Space (for most models).
3. Hold for 10 seconds until the indicator blinks 3 times.
4. Turn on the keyboard and try to reconnect.

💡

If the Xiaomi keyboard doesn’t connect to iOS, try pairing it with an Android device first, and then try again on your iPhone.

6. setting up functional keys and additional features

Xiaomi keyboards often come with additional function keys that you can customize to your needs. For example, the Mi Wireless Keyboard Pro has keys to control media, screen brightness and even run certain applications.

Setup on Windows

To change the assignment of the keys:

1. Download Microsoft PowerToys (free of charge).
2. Open the Keyboard Manager module.
3. Assign new commands for the Fn keys.

If you need to disable Fn combinations (for example, to keys) F1–F12 It was working by default, press Fn + Cap Lock on most Xiaomi models.

Setup on Android

On smartphones Xiaomi with MIUI You can use MacroDroid to create automatic actions when you press certain keys:

• 🎵 Launching music on Fn + Gap.
• 🔍 Quick search call by Fn + S.
• 📱 Opening the camera on Fn + C.

For Mi TVs, TV The key setting is limited to firmware, but you can use the keyboard to:

• 📺 Quickly search for content (Search button).
• 🎮 Game management (keyboards) WASD).
• 📁 Navigation by file (buttons) ← → ↑ ↓).

💡

If you use the Xiaomi keyboard to work with Mi TV, Turn off voice search in your TV settings – it may conflict with text input.

7. Update of Xiaomi keyboard firmware

In rare cases, unstable keyboard operation is associated with outdated firmware, which can only be updated on Windows PCs using the official Mi Bluetooth Assistant utility (available on the Xiaomi website for some models).

Instructions for updating:

1. Download and install Mi Bluetooth Assistant.
2. Connect the keyboard to the PC via Bluetooth.
3. Run the utility and wait until it determines the device.
4. If an update is available, click Update and follow the instructions.

Important: Do not turn off the keyboard or turn off the PC during the upgrade, this may cause it to fail. If the process is interrupted, try repeating it or contact Xiaomi support.

List of models that support firmware updates:

• 🖥️ Mi Bluetooth Keyboard 2
• 🖥️ Mi Wireless Keyboard Pro
• 🖥️ Xiaomi Modern Wireless Keyboard

FAQ: Frequently Asked Questions