How to connect the console to the TV Xiaomi Mi: all the ways and settings

Contents

• Preparation: What will be needed to connect
• Connection through HDMI (basic)
• Alternative connectors: AV, SCART, USB
• Customize sound and image after connection
• Solving typical problems (no signal, no sound, no picture)
• Android Connection TV Box and other smart consoles
• Wireless methods: Miracast, DLNA, Wi-Fi Direct
• FAQ: Answers to Frequent Questions

Connecting the console to the Xiaomi Mi TV is a challenge faced by owners of both new and outdated models. Despite the apparent simplicity, the process can be complicated by the lack of the right connectors, incompatible formats or errors in settings. In this article, we will discuss all possible ways of connecting: from the standard HDMI to wireless technologies, and also solve typical problems arising after connecting devices.

Feature of Xiaomi Mi TVs (series Mi) TV 4A/4S/4X/5/5X/Q1/Q2/A Pro and others are in their hybrid nature: they combine the functions of a classic TV and a smart device on Android. TV. This means that the console may be needed not only to watch cable or satellite TV, but also to expand the functionality – for example, installing specialized applications or games. It is important to consider the firmware version and available ports on the back of the TV, as the choice of connection method depends on this.

Preparation: What will be needed to connect

Before you start connecting, check for all the necessary components. Depending on the type of console and model of the TV Xiaomi Mi may need:

• 🔌 Cable HDMI (version 1.4 or higher for support 4K@60Hz and HDR). For Mi models TV Q1/Q2 recommended HDMI 2.1.
• 🔄 Adapters (if the connectors do not match): HDMI→DVI, AV→RCA, SCART→HDMI.
• 📶 Wi-Fi router (for wireless ways of connecting or configuring) IPTV).
• ⚡ Power supply for the console (if it does not have a built-in battery).
• 🔧 Screwdriver (for fastening the brackets of a satellite dish or cable splitter).

Pay attention to the location of ports on the Xiaomi Mi TV. In most models, the connectors are placed on the side panel (for example, Mi). TV 4A 32), but in large format versions (55" and above) they can be in the rear. HDMI-Ports: on budget models (e.g. Mi) TV 4S) There may be no support ARC (Audio Return Channel, which will limit the ability to transmit sound.

⚠️ Note: If you connect a satellite set-top box, make sure the TV supports the broadcast format (e.g., the TV supports the broadcast format, DVB-S2). Otherwise, an additional receiver will be required.

Connection through HDMI (basic)

HDMI — The most common and reliable way to connect the console to the Xiaomi Mi TV. It provides video transmission in resolution up to 8K (model HDMI 2.1) and multi-channel sound (including Dolby Atmos) and the connection process consists of several steps:

1. Choose a free one. HDMI-The port on the TV. On Xiaomi Mi models TV Q1/Q2 ports are numbered and may have different bandwidth (e.g, HDMI 1 supportive ARC).
2. Connect one end of the cable to the console, the other to the TV. Make sure the connectors are plugged in to the point (characteristic click).
3. Turn the console on the network and wait for its download.
4. On the Xiaomi Mi remote, click the Source (or Input) button and select the appropriate one. HDMI-port.

If the image does not appear, check:

• 🔌 Correction of the cable (try another one) HDMI).
• 🔄 Port mode (some Xiaomi Mi models require activation) HDMI-CEC customized).
• 📺 Output resolution on the console (must coincide with the supported TV).

On Xiaomi Mi TVs with firmware MIUI TV 3.0 and higher when first connected via HDMI A request for permission to use the function may be made HDMI-CEC (AnySee? Recommended - this will allow you to control the console from the TV remote.

💡

If, after connecting through HDMI Artifacts appear on the screen (strips, flickering), try to reduce the resolution in the settings of the console to 1080p or turn on the "Safe" mode HDMI".

Alternative connectors: AV, SCART, USB

If your Xiaomi Mi TV is not equipped with HDMI-If you have a port (which is unlikely for modern models) or a console that is outdated, you can use alternative ways of connecting:

1. Connection through AV (RCA,"tulip")

Budget console models (for example, for analog cable TV) are often equipped with a connector. AV (Yellow for video, red/white for audio:

• 🔌 adapter AV→HDMI (For example, Portta PET0301S).
• 📺 Power supply for the adapter (usually) USB 5V).

Connect. AV-cable to the console and adapter to HDMI-In the settings of the signal source, select the appropriate HDMI.

2. Connection through SCART

For old consoles with a connector SCART will require an adapter SCART→HDMI or SCART→AV (Please note that such adapters often require additional power and may delay the signal.

3. Connection through USB (multimedia-only)

Some Androids TV Box (e.g. Xiaomi Mi Box S) supports connectivity over the USB-C or Micro-USB mode OTG. But this is only suitable for data transmission, not video transmission, and it still requires that you display the image on the TV. HDMI.

⚠️ Note: When using adapters AV→HDMI or SCART→HDMI You may experience a delay of up to 200-300 ms. This is critical for watching movies, but it is unacceptable for games.

Customize sound and image after connection

After successfully connecting the console to the Xiaomi Mi TV, you need to optimize the sound and image settings, which is especially important if you are connecting a game console or a video game console. 4K-A set-top box where the quality of the image directly affects the experience of using.

1. Setup of permission and frame rate

Go to the console settings and set the following parameters:

• 📺 Resolution: Select the maximum supported by the TV (e.g., the maximum supported by the TV, 3840×2160 for Mi TV 4S/5).
• 🔄 Frequency of Update: Enough for the movie 24Hz, play-off — 60Hz or 120Hz (if maintained).
• 🎨 Color profile: RGB or YCbCr 4:4:4 (for text), YCbCr 4:2:0 (for video).

2. Sound tuning

If the sound is transmitted through HDMI (regime ARC or eARC), check the following settings on your Xiaomi Mi TV:

1. Go to Settings. → Sound. → Digital audio output.
2. Select Auto or Passthrough (for multichannel audio without decoding).
3. If you use an external sound system, activate it. HDMI ARC Settings menu → System system → Devices CEC.

For consoles with analog audio output (RCA or 3.5 mm) connect the cable to the corresponding connector on the TV or external acoustics.

💡

For Xiaomi Mi models with Dolby Vision support (e.g. Mi) TV Q1) In the settings of the consoles, turn on the "Dolby Vision" mode. IQ" — This automatically optimises brightness and contrast depending on the lighting in the room.

Solving typical problems (no signal, no sound, no picture)

Even with the right connection, there can be problems, and let’s look at the most common ones and how to fix them on Xiaomi Mi TVs:

1. No signal (black screen)

Causes and solutions:

• 🔌 Faulty cable: Try another one HDMI or check integrity AV-cable.
• 🔄 Incorrect Source: Click Source on the remote and select the desired port.
• ⚡ Insufficient power: some consoles require a connection to the outlet, not to the USB-television-port.
• 📺 Incompatible resolution: reset the settings of the consoles to the factory or install 720p manually.

2. No sound.

Check the following:

• 🔈 Sound output mode: in the settings of the consoles select HDMI or PCM (if the sound is ARC).
• 🎧 Volume: The TV and console must have a volume of at least 50%.
• 🔌 Cable: if you use HDMI→DVI Adapter, no audio transmission – you will need a separate audio cable.

3. Poor image quality (artifacts, ripples)

Possible solutions:

• 📶 Interference: if you use AV-cable, make sure it is shielded and away from interference sources (routers, microwaves).
• 🔄 Settings HDMI: in the TV menu (Settings) → Display. → HDMI-Select PC instead of Game Console.
• 🎨 Color palette: set up RGB 8 bit 10/12 bit if the TV does not support extended formats.

⚠️ Attention: On the TVs Xiaomi Mi TV P1 matrixed QLED when connecting the consoles through HDMI 2.1 A green screen may be observed when resolution is 4K@120Hz. Solution: Update the TV firmware to the version MIUI TV 3.5.1 higher.

Android Connection TV Box and other smart consoles

Android-based consoles TV (For example, Xiaomi Mi Box S, NVIDIA Shield, Mecool) connect to the Xiaomi Mi TV on the same principle as other devices, but have a number of features:

1.Initial setting

After connecting through HDMI:

1. Choose the language and region (Russia or Europe is recommended for the correct work) IPTV).
2. Connect to Wi-Fi or Ethernet (for Xiaomi Mi Box, it’s better to use a wired connection for stability).
3. Sign in to your Google account (required to install apps from the Play Market).

2. Optimization for Xiaomi Mi

To improve compatibility:

• 📺 Enable Developer Mode: Go to Settings → About TV and 7 times click on the Assembly Number. → For developers, activate the debugging by USB and Don't turn off the screen.
• 🔄 Set up. HDMI-CEC: In the console menu, turn on AnySee or HDMI-Control to control it from the Xiaomi Mi remote.
• 🎮 For gamers: in the settings of the consoles, select Game Mode and turn off post-processing of video.

If the console is slowing down, try:

• 🧹 Clear the cache: in Settings → Apps select the problem app and click Clear cache.
• 🔄 Disable animation: in Settings → For developers, install animation = Off.
• 📥 Update the firmware: in Settings → System system → Update of the PO.

Wireless methods: Miracast, DLNA, Wi-Fi Direct

If you don't want to use cables, you can connect the console to a Xiaomi Mi TV wirelessly. Let's look at three main technologies:

1. Miracast (screen duplication)

It allows you to broadcast the console screen to the TV without wires.

1. On Xiaomi Mi TV, go to Settings → Connection and sharing → Miracast.
2. Activate the Wireless Display or Screen Mirroring feature.
3. Select the TV from the list of available devices.

Limitations:

• 📶 Maximum authorization — 1080p (Even if the TV is still on 4K).
• 🎮 Delay up to 100 ms (not suitable for gaming).

2. DLNA (streaming)

Used to watch movies, photos and music from the set-top box to the TV.

1. On the console, install it. DLNA-server (e.g. BubbleUPnP).
2. On the Xiaomi Mi TV, open the Media Player or Gallery app.
3. Select the console as the source of media files.

3. Wi-Fi Direct

Direct connection between the set-top box and the TV without a router, suitable for file transfer or console control as a remote. Activated in the Settings menu → Wi-Fi → Wi-Fi Direct on both devices.

⚠️ WARNING: When using Miracast or Wi-Fi Direct, the Xiaomi Mi TV can automatically turn off HDMI-To avoid this, go to Settings before you wirelessly connect. → Display. → Screen mode and select Duplicate.

FAQ: Answers to Frequent Questions