How to connect the console to the TV Xiaomi Mi: all ways + mistake-making

Contents

• Preparation: What will be needed to connect
• Connection through HDMI — basic
• Alternative connectors: AV (RCA), SCART, VGA
• Wireless connectivity: Miracast, AirPlay, DLNA
• Customization of sound and pictures after connection
• Typical problems and their solution
• Features of connection to popular models Xiaomi Mi TV
• Frequent Questions (FAQ)

Connecting the console to the Xiaomi Mi TV seems to be an easy task, but in practice users face nuances: from the mismatch of connectors to the lack of sound after the connection. In this article, we will analyze all the current ways of connecting - from the classic to the traditional. HDMI to wireless technology, and also solve problems that arise on Mi TVs TV 4S, Mi TV Q1, Mi TV A2 other models.

It is important to consider that modern consoles (for example, Xiaomi Mi Box S, NVIDIA Shield or Apple TV 4K) require not only a physical connection, but also the correct setting of screen resolution, sound format and even mode HDR. If you ignore these points, the picture may be blurry, the sound may be intermittent, and some features (such as voice search) may not work at all.

We have compiled instructions taking into account the features of the firmware MIUI TV 2026, where the paths to some settings have changed (for example, the Digital Sound menu moved to the Sound section) → Additional support data were added. HDMI 2.1 and eARC in the new Xiaomi models.

Preparation: What will be needed to connect

Before you combine the set-top box and the TV, check for all the components you need, and here is the minimum set for most scenarios:

• 📺 Xiaomi Mi TV with a free port HDMI (Preferably version 2.0 and above 4K).
• 🖥️ The console with a power cable and remote control (if the console is on Android) TV, preload the remote).

Alternative ways of connecting may require:

• 🔄 Adapters: HDMI → AV (RCA), HDMI → VGA (if you don't have a TV HDMI).
• 📶 Wi-Fi router (for Miracast or AirPlay wireless protocols).
• 🔌 Extensioner HDMI or repeater (if the cable is too short).

Pay attention to the version. HDMI-The port of your TV, for example, Xiaomi Mi. TV Q2 2023 fitted HDMI 2.1, supportive 4K@120Hz and 8K@60Hz, and older models (e.g. Mi) TV 4A) only HDMI 2.0 (maximum 4K@60Hz. If you plug in the output box. HDMI 2.1 port HDMI 2.0, The TV may not show a picture or automatically lower the resolution.

⚠️ Note: If your Xiaomi TV is released before 2019, check for a port HDMI ARC (usually signed HDMI Without it, it is impossible to output sound from the console to the soundbar through one cable. HDMI.

Connection through HDMI — basic

Most of the modern consoles (including Xiaomi Mi Box S, Apple) TV 4K Satellite receivers connect to the TV via HDMI. This is a method that maximizes the quality of the picture and sound without delay:

1. Turn off the TV and the console from the socket (this will prevent failures on the first connection).
2. Connect the set-top box and TV with a cable HDMI. Use the port. HDMI 1 or HDMI 2 (If you plan to bring the sound to the soundbar, choose HDMI ARC/eARC).
3. Turn on the TV and go to the signal source: on the Xiaomi remote, press the button SOURCE (or INPUT) and select the appropriate HDMI-port.
4. Turn on the console. The screen should show a boot screen.

If the picture didn't show up:

• 🔄 Check if the cable is tightly inserted into both devices.
• 🔍 Try another one. HDMI-TV-port.
• 🔧 On Android. TV Press the Settings button on the remote and select Settings → Display and sound → Screen resolution, then set up 1080p@60Hz (if the TV does not support TV) 4K).

Check the version. HDMI-port-television

Use a certified High Speed cable HDMI

Choose the right signal source (SOURCE)

Update the TV firmware to the latest version-->

On Xiaomi TVs with MIUI TV After the connection, a notification may appear: “New device detected HDMI. Adjust automatically? "" You can agree that the system optimizes the sound and the image. If the notification doesn't appear, go to Settings. → Connected devices → HDMI and select Game Mode (to minimize delay) or Movie (for better color rendering).

⚠️ Note: If you have connected to Apple TV Xiaomi Mi TV The sound is moving and the picture is missing, check the settings HDMI-CEC. On the TV, go to Settings. → System system → Management HDMI-CEC Disable this feature, it may conflict with the Apple protocol.

💡

If you connect the console Xiaomi Mi TV picture flashes or bursts, try to turn off the function Dynamic refresh rate in the TV menu (VRR). It may conflict with the output signal of the console.

Alternative connectors: AV (RCA), SCART, VGA

If your Xiaomi Mi TV is not equipped with HDMI (For example, very old models, or the port broke, you can use analog connectors, but the picture and sound quality will be much worse, and some functions (for example, the image and sound quality will be much worse, HDR Dolby Vision will be unavailable.

Connection through AV (RCA,"tulip")

This method will require:

• 🔴🟢🔵 Cable RCA (3 video plugs and 2 audio plugs).
• 🔄 adapter HDMI → AV (if the prefix has only HDMI-exit).

Instructions:

1. Connect the yellow plug (video) to the port AV IN TV-wise.
2. Connect the red and white plugs (audio) to the corresponding connectors.
3. On the Xiaomi remote, click SOURCE and choose AV.
4. If the prefix has only HDMI, Connect it to the adapter and the adapter to the adapter. RCA-TV-inlet.

Limitations of the method:

• ❌ Maximum authorization — 576p (for PAL) or 480p (for NTSC).
• ❌ No multi-channel sound support (only stereo).
• ❌ Possible interference and "snow" on the screen with a weak signal.

Connection through VGA

Some older consoles (e.g. Dune) HD or IconBit have an output VGA. To connect to Xiaomi Mi TV need to:

• 🔷 Cable VGA → VGA.
• 🔊 Separate audio cable 3.5 mm → RCA (so VGA only transmits video).
• 🔄 adapter VGA → HDMI (if the TV does not have VGA-entrance).

On the TVs Xiaomi port VGA It is extremely rare (only in models before 2016).If your TV doesn't have one, use an adapter. VGA → HDMI, Note that these adapters require additional power (usually through the USB).

Wireless connectivity: Miracast, AirPlay, DLNA

If you don't want to pull cables or if you don't want to have a TV hanging on the wall without access to ports, you can connect the console over the air. Xiaomi Mi TVs support several wireless protocols:

• 📱 Miracast – for screen broadcasting from Android devices (including Android consoles) TV).
• 🍎 AirPlay - for Apple consoles TV or iOS devices.
• 🌐 DLNA — playback of media files from the set-top box to the TV.

Connection via Miracast

This method works if both the console and the TV support Miracast (most Xiaomi Mi models). TV After 2018, support is provided).

Instructions:

1. On the TV, go to Settings → Connection and Sharing → Wireless Display.
2. Turn on the Miracast option.
3. On Android. TV Open the settings. → Display and sound → Screen broadcasting.
4. Choose your Xiaomi TV from the list of available devices.

Advantages:

• ✅ No need for cables.
• ✅ It supports sound (unlike some analogues).

Disadvantages:

• ❌ Image delay (~50–100 ms), noticeable in games.
• ❌ The quality of the picture is worse than the HDMI (maximum 1080p@30Hz).

Connecting via AirPlay (for Apple) TV)

Xiaomi Mi TVs TV firmware MIUI TV 3.0 and later support AirPlay, but for this purpose:

1. Make sure that the TV and Apple TV connected to the same Wi-Fi network.
2. On your TV, turn on AirPlay in Settings → Connection and Sharing → Apple AirPlay.
3. On the Apple console. TV Select Settings → Video and audio → Broadcast the screen and find the TV.

If AirPlay is not working:

• 🔄 Restart the router (sometimes interferes with the double router). NAT).
• 🔒 Turn it off. VPN on the set-top box.
• 📶 Check that both devices are connected to a 2.4 GHz network (some Xiaomi models do not support AirPlay on a 5 GHz network).

💡

Wireless protocols are convenient for streaming video, but are not suitable for gaming or watching movies in high resolution due to latency and loss of quality.

Customization of sound and pictures after connection

Even if the console successfully connected to the Xiaomi Mi TV, additional adjustments are often required for optimal quality.

Configure permission and frequency of update

If the picture is blurred or cropped:

1. On Android. TV Go to Settings. → Display and sound → Screen resolution.
2. Select Auto or manually set the resolution supported by the TV (e.g, 3840×2160@60Hz for 4K).
3. If the image is twitching, try changing the refresh rate from 60 Hz to 50 Hz (relevant for satellite consoles).

On Xiaomi TVs, you can also configure the zoom mode:

• 📺 Settings → Picture → Screen mode → Select by screen size (for exact matching to console resolution).
• 🎮 If you play games, turn on Game Mode in the same menu – this will reduce the input delay.

Sound tuning (HDMI ARC, optical output, Bluetooth)

If the sound is not through the TV, but through external acoustics (soundbar, receiver), adjust its output:

• 🔊 Through HDMI ARC/eARC: Connect the soundbar to the port HDMI ARC on the TV. HDMI-CEC In Settings → System system → Management HDMI-CEC. On the console, select the sound output → HDMI.
• 🎵 Through the optical output (S/PDIF): Connect the optical cable to the Optical port on the TV. In the TV menu (Settings) → Sound. → Digital sound) select PCM or Dolby Digital.

If there's no sound at all:

• 🔇 Check if the sound on the console is turned off (Mute button on the remote).
• 🔄 Reboot the set-top box and TV.
• 🔊 On Xiaomi TV, go to Settings → Sound. → Sound output and select HDMI (if connected to HDMI) Interior speakers (if the sound must come from the TV).

⚠️ Note: If you have connected the Apple console TV 4K Xiaomi Mi TV Q2 And the sound is delayed, turn off in the Apple settings. TV Option Dynamic range (Settings) → Video and audio → Sound format.This feature may conflict with the audio processing on Xiaomi TVs.

Typical problems and their solution

Even with the right connection, there can be problems, and let's look at the most common ones and how to fix them.

1. No image, but sound is

Possible causes and solutions:

• 🔍 Incompatible resolution: The console displays a signal in a resolution that does not support the TV (for example, the TV, 4K@120Hz on Mi. TV 4S). Solution: Manually install on the console 1080p@60Hz.
• 🔌 Problems with HDMI-Cable: The cable is damaged or does not support the desired version HDMI. Solution: Try another cable (preferably High Speed certified) HDMI).
• 🔧 Failure HDMI-port: The port on the TV or console is faulty. Solution: Connect the console to another port HDMI TV-wise.

2. No sound, but the image is

The most common problem lies in the sound settings:

• 🔊 Incorrect sound output: The console selected sound output through HDMI, The TV is waiting for an optical cable signal (or vice versa). → Exit, select HDMI.
• 🔇 Television Disabled: Maybe Mute mode is activated or the wrong sound source is selected.Solution: On Xiaomi remote, press Mute or check Settings → Sound. → Sound output.
• 🎵 Incompatible sound format: The console transmits sound in Dolby TrueHD format, which does not support the TV. Solution: In the settings of the consoles, select PCM or Dolby Digital.

3. The picture twitches or brakes

This problem is typical of:

• 📶 Wireless connection: Delays when broadcasting on Miracast or AirPlay. Solution: Connect the console on the console HDMI Use an Ethernet cable for a stable Internet connection.
• 🔄 Upgrade frequency mismatches: The console outputs 50 Hz and the TV expects 60 Hz (or vice versa).Solution: In the set-top box settings, set 60 Hz (or 50 Hz if the European-built TV is available).
• 🖥️ CPU overload: A weak console (like the Xiaomi Mi Box S) doesn't pull 4K-Content. Solution: Reduce permission to 1080p or turn it off. HDR.

4. The console remote is not working.

If the remote doesn't respond:

• 🔋 Batteries are dead: Replace the batteries.
• 📶 Interference from other devices: Remove infrared sources (such as incandescent lamps) near the console.
• 🔄 Reset remote: On some remotes (for example, from Xiaomi Mi Box) press the Menu buttons + OK 5 seconds to reset.
• 🖥️ TV conflict: Some Xiaomi TVs block IR signals from third-party remotes Solution: Connect the Bluetooth remote (if supported) or use the remote app on your smartphone.