How to connect Dendy to Xiaomi TV: all the ways + mistake-making

Why connecting Dendy to Xiaomi isn’t as easy as it sounds

Dendy is the legendary retro console, Released in 1990-But still a favorite of millions of gamers, but connect it to a modern Xiaomi TV (especially the Mi models). TV 4A/5A/6, Redmi Smart TV Xiaomi TV Q2/Q1E) It's not a trivial task, because new TVs don't have classical composite inputs (RCA) — The tulips that Dendy plugged in out of the box, and instead, the manufacturers leave only the tulips. HDMI, USB-C digitizer.

But that doesn't mean we're going to have to give up nostalgia, because there are several proven ways to connect, each with its own nuances.

• 🔌 Direct connection via RCA (If there's a TV entrance)
• 🔄 Use of adapters (RCA → HDMI, AV → SCART)
• 🎮 Alternative methods (via receiver, capture card or emulators)
• ⚙️ Customize the image and sound on Xiaomi after connecting
• ❌ Common Mistakes and How to Avoid Them

Before you go to the instructions, make sure you have everything you need. TV It was released after 2018, it probably does not have a built-in RCA-You'll have to use adapters, and check the condition of the Dendy cables, because oxidized contacts or damaged insulation can cause interference on the screen.

Method 1: Direct connection through RCA (If there's a TV entrance)

The easiest way to do this is if you have Xiaomi. TV It's equipped with a classic composite input (yellow for video, red/white for audio), and you can find these connectors in budget models or TVs released before 2020, and to check if they're available, check the back or side panel of the device, look for the labels. AV IN, COMPONENT IN or three-circle pictogram.

If there is an entrance, follow the steps:

1. Connect Dendy’s yellow cable to the yellow socket on TV.
2. Connect the red and white cables (audio) to the corresponding connectors.
3. Turn on the set-top box and the TV.
4. On the Xiaomi remote, press the button SOURCE (or INPUT) and select the source of the signal. AV composite.

If the image does not appear:

• 🔄 Check if the Dendy permission is correctly selected (if there is a switch). PAL/NTSC). For Russia, it is usually used PAL.
• 🔊 Make sure the sound is not turned off on the TV or console (check the volume control on the Dendy case).
• 🔌 Try another cable - sometimes contacts oxidize.

⚠️ Note: Some Xiaomi models (e.g. Mi) TV 4S) The composite entrance can be hidden behind the stub. Carefully remove it with a plastic card so that the case does not damage.

Method 2: Connecting via adapter RCA → HDMI

If you're Xiaomi. TV no RCA-If you're going to log in, you're going to need an analog to digital converter. RCA to HDMI (For example, Portta models PET0301S Neoteck NTK059). These devices convert the signal from "tulips" to HDMI, compatible with modern televisions.

How to connect:

1. Connect Dendy cables (yellow, red, white) to the corresponding connectors on the adapter.
2. Connect the adapter to the power supply (most converters require an external source). 5V).
3. HDMI-cable from the adapter insert a free port on TV.
4. Turn on the console and adapter, then on TV select the source. HDMI (port number to which the converter is connected).

Important nuances:

• 🔋 Some adapters don’t work without power – if the image doesn’t appear, check the connection to the outlet.
• 📺 The screen may show the words No Signal or Unsupported Format. in this case, try to switch the mode to Dendy (button). RESET jumper PAL/NTSC).
• 🔊 Sound can be transmitted with a delay (up to 0.5 seconds) – this is normal for low-cost converters.

⚠️ Note: Cheap adapters (price below 800) ₽) often PAL — signal will be black and white or with interference. Before buying, specify in the description compatibility with the Russian standard.

💡

If the adapter is not defined by Xiaomi TV, Try to connect it through another one. HDMI-Port (some TV sets reserve the first port for the port) ARC They can ignore the signal from the converters).

Method 3: Connecting via a receiver or AV-receiver

If you have at home AV-receiver (e.g. Yamaha) RX-V, Denon AVR Or even the old Sony. STR), It can be used as a medium between Dendy and the TV, and this is a good technique if the receiver supports the composite input and the TV is connected to it via the composite input. HDMI.

Instructions:

1. Connect Dendy to the receiver via RCA (yellow/red/white).
2. Connect the receiver and the TV Xiaomi cable HDMI.
3. On the receiver, select the source of the signal. AV composite.
4. On TV, choose. HDMI-port to which the receiver is connected.

Advantages of the method:

• 🎵 Ability to output sound to the acoustic system (columns, soundbar).
• 📺 No sound delay (unlike budget adapters).
• 🔄 You can connect several retro devices (for example, Dendy). + Sega Mega Drive).

Disadvantages:

• 💰 Presence required AV-Receiver (not everyone has it).
• ⚙️ Configured inputs/outputs on the receiver may take time).

Method 4: Using an exciting card (for PC or laptop)

If you want to not only play on the big screen, but also record gameplay or stream Dendy, you can use a video capture card, which is suitable for PC/laptop owners, as it requires additional hardware.

Equipment required:

• 🖥️ Video capture map from RCA-Entrance (e.g. Elgato Video Capture, Hauppauge USB-Live 2).
• 💻 Computer with installed capture software (OBS Studio, AmarecTV).
• 📺 Xiaomi TV with Miracast support HDMI PC-based.

Step-by-step:

1. Connect Dendy to the capture card via RCA.
2. Connect the card to the computer by USB.
3. Run a capture program (for example, OBS) Select the map as the source of the video.
4. Configure the output of the image on the TV: HDMI (If your PC is connected to your TV cable, by Miracast (wireless stream from your laptop to Xiaomi) TV).

Important: video capture cards delay up to 1-2 seconds, which can be critical for dynamic games (for example, Contra or Battle City (RCA → HDMI receiver).

Customize the image and sound on Xiaomi TV

After a successful Dendy connection, you may need to adjust the screen settings, as retro consoles display the signal in resolution. 240p or 480i, Modern TVs are optimized for Full HD/4K. Here's what we can do:

To improve the picture:

• 📊 Go to Settings. → Image: → Screen mode and select Game or Movie (this will reduce input delay).
• 🔍 Enable Noise Reduction (Settings) → Image: → Additionally. → Noise suppression) if the image “snows".
• 🎯 Turn off Auto-Adjustment of Brightness (Settings) → Image: → Light sensor, so that the colors do not distort.

To tune the sound:

• 🔊 If the sound is too quiet, turn up the volume on Dendy itself (the regulator on the body) and in the TV settings (Settings). → Sound. → Balance).
• 🎶 Enable Stereo Mode (Settings) → Sound. → Sound format) if audio is played through only one speaker.

💡

If an Unsupported format message appears on the screen, try manually setting the resolution to Dendy (if there is a switch) or use an adapter with support for signal scanning (upscaler).

Common Mistakes and How to Avoid Them

Even with the right connection, users often face problems, and here are the most common ones and ways to solve them:

1.The TV doesn't see the signal from Dendy

• 🔌 Check that the cables are connected before the console is turned on (some adapters do not recognize a hot connection).
• 🔄 Make sure you choose the right TV. SOURCE (for example, HDMI 1. HDMI 2).
• 💡 Try restarting the TV (pull the power cord for 30 seconds).

2. Image blurred or disturbed

• 📶 Check the quality of the cables – cheap RCA-Cords can be a source of noise.
• 🔧 If you use an adapter, try to disconnect the power from the USB 3.0 (sometimes ports) USB 3.0 is a hindrance).
• 🛠️ Clean the contacts on Dendy cables and connectors with alcohol (oxidation worsens the signal).

3.There is a sound, but no image (or vice versa)

• 🔊 If there is no audio: check that the red and white cables are connected to the audio input, not the video.
• 📺 If no image: Make sure the yellow cable is connected to Composite In, not Component In (they are visually similar but not compatible!).

⚠️ Note: Some Xiaomi TVs (e.g. Mi) TV Q1E) Settings menu → System system → And there's also the option to turn off analog inputs, and if it's activated, the TV won't recognize the signal from Dendy even through the adapter!

FAQ: Answers to Frequent Questions