How to clean the hand vacuum cleaner Xiaomi: full instructions with photos and tips

Xiaomi hand vacuum cleaners have gained popularity due to their compactness, power and ease of use. But even the most reliable device requires regular maintenance — especially if it comes to equipment that encounters dust, animal hair and small debris every day. Improper cleaning can lead to reduced suction capacity, engine overheating or even breakdown. In this article, we will discuss how to clean a hand vacuum cleaner Xiaomi of any model, from the budget Mi Handheld Vacuum to the flagship Dreame and Deerma.

You will learn which parts require mandatory cleaning, how often you need to do it, and what errors can shorten the life of the device. We will also share exclusive tips from service centers to help avoid typical problems. If your vacuum cleaner becomes worse sucking, loudly humming or quickly discharged - most likely, it urgently needs a general cleaning!

Why it is important to clean Xiaomi hand vacuum cleaner regularly

Many users mistakenly believe that it is enough to empty the dust collector after each cleaning, in fact, pollutes all the key elements: filters, turbobrush, air ducts and even the engine.

• 🔋 Reduced suction power by 30-50% because of clogged filters and garbage chutes.
• 🔥 Overheating of the engine, which can put the vacuum cleaner out of action (especially important for models with lithium-ion batteries).
• 🦠 Reproduction of bacteria and mold in wet garbage (if liquids were removed with a vacuum cleaner).
• 💸 Increased electricity consumption – a polluted vacuum cleaner spends more charge on the same job.

According to statistics from service centers, 68% of Xiaomi hand vacuum cleaners break down due to late cleaning of filters and turbo brushes, and 90% of these malfunctions could be prevented with simple preventive measures.

What Xiaomi models require special care

Despite the general principles of cleaning, some models have unique features.

If you are not sure about your vacuum cleaner model, check the sticker on the case or in the documentation. It contains the exact name, which you can find official instructions on the Xiaomi website. For most modern models, a universal cleaning scheme is suitable, but some parts (for example, filters for wet cleaning) require a special approach.

💡

Before cleaning the first one, take a picture of the location of all the parts on your phone – this will help to properly assemble the vacuum cleaner back, especially if you are doing it for the first time.

Step-by-step: how to disassemble and clean the vacuum cleaner

So let's start with a complete disassembly of the device, and it's important to be careful not to damage the plastic latches, and here's the universal algorithm for most models.

1. Turn the vacuum cleaner off the mains (if it’s connected to charging) and take out the battery (if possible in your model).
2. Remove the dust collector: press the button or pull the container down (depending on the model).
3. Remove all filters: This is usually the case. HEPA-filter (thin, often white) and cyclone filter (metal or plastic mesh).
4. Unplug the turbobrush and other attachments. In some models, you can disassemble the brush by removing the cover with a screwdriver.

Now we're going to start cleaning every part, and here are the detailed instructions for the different materials.

Prepare a soft brush and fabric without pile|

Buy compressed air (optional for purging channels)|

Prepare warm water and neutral detergent|

Prepare a drying place (for 24 hours)-->

Cleaning of dust collectors and filters

A vacuum cleaner is the heart of a vacuum cleaner that collects all the garbage, and it needs to be cleaned after every use, but many people forget about deep cleaning.

• 🧹 Dry cleaning: shake the debris out into the urn, then remove the dust residues with a soft brush.Do not use sharp objects - they can damage the plastic.
• 💦 Wet cleaning (once a month): wash the container with warm water and soap, then dry thoroughly. For models with wet cleaning function (e.g. Dreame) W10) Be sure to use an antibacterial agent for disinfection.
• 🌀 HEPA-filter: vacuum it gently with another vacuum cleaner (at minimum power) or rinse it under running water. Never brush it - this disrupts the structure of the fibers.
• 🔄 Cyclone filter: remove the metal mesh and rinse it under water pressure. If the mesh is deformed, replace it.

⚠️ Note: Filters made of paper or nonwoven material (e.g. in Mi Handheld Vacuum models) 1C) You can't wash them, they can only be pylesicated or replaced with new ones.

2. Turbobrush and nozzle cleaning

The turbobrush is the most problematic part of the vacuum cleaner, and the hair, the threads and the fur of the animals are wound onto the shaft, blocking the rotation.

1. Remove the brush from the vacuum cleaner (usually there is a button or latch).
2. Put a knife or screwdriver on the cover of the brush (in some models it is attached to the screws).
3. Remove all hair and debris from the shaft. It is convenient to use pliers or a special hook (comes with some models).
4. Check the bearings – if they jam or creak, lubricate them with silicone lubricant (1-2 droplet).

For bristles nozzles (such as furniture), use a toothpick to remove the stuck hair between the villi. Metal nozzles (such as for crevices) can be washed underwater and dried.

Blowing of air channels

Over time, the dust accumulates in the air ducts of the vacuum cleaner, which leads to a decrease in power.

1. Take a can of compressed air (sold in electronics stores).
2. Direct the jet into the inlet and outlet of the vacuum cleaner (where the hose is attached and where air exits).
3. Repeat the procedure. 2-3 intervally 10 seconds.

If there is no compressed air, you can use a vacuum cleaner with reverse traction: bring the hose of another vacuum cleaner to the holes and turn it on at maximum power.

⚠️ Warning: Never use pressurized water (such as from a hose) to purify - this can damage electronics. Also avoid metal objects that can scratch plastic or jam fan blades.

How often should you clean the Xiaomi vacuum cleaner?

The frequency of cleaning depends on the intensity of use and the type of garbage being removed.

If you remove building dust, animal wool or wet debris, cleaning should be carried out in the 1.5-2 You should also pay attention to the vacuum cleaner signals:

• 📉 Reduced suction power.
• 🔊 Increased noise during operation.
• 🔋 Fast battery discharge.
• 🌡️ Overheating of the housing (vacuum cleaner is switched off through 5-10 minute).

These symptoms suggest that the vacuum cleaner urgently needs cleaning, even if little time has passed since the last procedure.

💡

Regular cleaning not only prolongs the life of the vacuum cleaner, but also saves you money: clogged filters increase energy consumption. 20-30%.

Common cleaning errors and how to avoid them

Many users make mistakes that lead to breakdowns, and here are the most common ones and how to avoid them:

• 🚫 Use of aggressive detergents (e.g. bleach or acetone) – they destroy plastic and rubber seals. Use only neutral soap or special equipment for the technique.
• 🚫 Dry filters with a hair dryer or on a battery - high temperature warps materials. Dry parts at room temperature for 24 hours.
• 🚫 Building a vacuum cleaner with wet parts leads to short circuits. Always check dryness with your hands before assembly.
• 🚫 Ignoring small parts (such as sealing gums or turbobrush nets) and contamination leads to loss of power.
• 🚫 Storing a vacuum cleaner in a damp room (for example, in the bathroom), this causes corrosion of metal parts and mold growth.

Another common mistake is using a vacuum cleaner without filters. HEPA-The filter, thinking that this will increase the power, actually leads to dust entering the engine and premature wear. If the filter is badly clogged, it is better to buy a new one (you can order them on AliExpress or in official Xiaomi stores).

Where to buy spare parts and filters for Xiaomi

If your vacuum cleaner requires replacement parts, here’s where you can get them:

• 🛒 Xiaomi official store (mi.com) – original parts, but prices are above average.
• 🌍 AliExpress is a large selection of compatible filters and brushes at low prices.Look for sellers rated above 98%.
• 🏬 Electronics stores (for example, M. Video, Eldorado) – sometimes there are filters for popular models.
• 🔧 Service centers – you can order parts through them, even if you do not plan to repair.

When buying filters, pay attention to the article (in the instructions for the vacuum cleaner) and compatibility with your model. V10 Not suitable for Mi Handheld Vacuum 1C, Even if they look the same on the outside.

Cost of spare parts:

• HEPA-filter: 300-800 rubles.
• Cyclone filter: 500-1200 rubles.
• Turbobrush: 1000-2500 rubles.
• Battery: 1500-4000 rubles (depending on capacity).

⚠️ Note: When buying batteries on AliExpress, check the actual capacity (the description should indicate Real Capacity.

FAQ: Answers to Frequent Questions