How to properly open the dispenser of soap Xiaomi: all ways and life hacks

Xiaomi’s liquid soap dispensers have become an integral part of smart bathrooms thanks to their minimalist design, automated feeding and integration into the Mi Home ecosystem. However, many users face difficulties when trying to refill or clean the device for the first time – the manufacturer does not always pay attention to the intuitiveness of the process. In this article, we will discuss all the official and alternative ways to open dispensers of different models (from Mijia Smart Liquid Dispenser to Xiaomi Youpin Viomi), talk about hidden latches, necessary tools and typical errors that lead to breakdowns.

Special attention will be paid to models with magnetic mounts (for example, Xiaomi Youpin Viomi Smart Soap Dispenser). T1), And you'll also find unique data on the strength of the locks, which is information that the manufacturer doesn't specify in the instructions, but which is critical to avoid damage to the plastic case.

What Xiaomi Dispensers Models Are and How They Differ

Xiaomi and its sub-brands (Mijia, Viomi, Youpin) have produced more than 10 models of liquid soap dispensers that look similar but have different opening mechanisms.

• 🔧 The Mijia Smart Liquid Dispenser 1S) — The top cover is counterclockwise, suitable for thick gels.
• 🧲 Magnetic Models (Viomi) T1, Xiaomi Youpin Smart Dispenser Pro – the cover is fixed by invisible magnets and requires a sideways shift.
• 🔒 Mijia Smart Soap Dispenser Lite – have hidden plastic locks that you need to press simultaneously.
• 💧 Xiaomi Smart Pump Dispenser – The tank is separated from the base by pressing the side buttons.

The most common in the Russian market - Mijia 1S (threaded) and Viomi T1 (The latter are often confused because of the similar design, but trying to unscrew the magnetic model can lead to breakage of the mounts.

If you are not sure about your dispenser model, check the markings on the bottom of the device or in the Mi Home app (Devices section). → Settings → Incorrect opening is the main reason for contacting service centers.

Preparing for Discovery: Tools and Precautions

Before you start disassembling, prepare:

• 🧴 New soap or gel - if you plan to refuel, use liquids with a viscosity of no more than 5000 cPz (standard for Xiaomi dispensers.
• 🔧 Tools: Plastic blade (for models with latches) Rubber gloves (soap can corrode the skin) Wipes made of microfiber (for wiping contacts)
• 📱 Phone with Mi Home app – some models block the opening mechanism when battery is low.

⚠️ Warning: If the dispenser is connected to the socket (models with a UV lamp), be sure to turn it off 10 minutes before disassembly. The capacitors can retain charge, which will lead to a short circuit when moisture enters.

For models with battery (Viomi) T1) Check the charge level in the app. If it's below 15 percent, the device can automatically lock the lid, which is protection against accidental opening when discharged.

Check the device model|Disconnect from the network / charge the battery|Prepare the tools.|Put on your gloves.|Put the wipes on the working surface-->

Step-by-step: how to open a threaded model (Mijia) 1S, Lite)

The threaded dispensers are the easiest to maintain, but there are nuances to this.

1. Turn the dispenser upside down and put it on a flat surface. Make sure the tank is empty (if not, drain the remaining soap through the nose).
2. Find the alignment marks -- most models have two small dots on the lid and the body -- and they should match when they're in the right position.
3. Press the lid down and turn counterclockwise (when viewed from above).The effort should be moderate - the maximum force of pressing for Mijia 1S less than 2 kg.
4. Remove the lid after a characteristic click. If the thread is "stook off", use a rubber pad for better grip.

If the lid doesn't lend itself:

• 🔥 Heat the body with a hair dryer (temperature not higher than 50)°C - this will expand plastic.
• 🧴 Apply a few drops of silicone lubricant to the thread and wait 5 minutes.

⚠️ Warning: Don't use metal tools to unscrew -- they leave scratches on the glossy plastic, which breaks the tightness. If the thread is damaged, the device will start leaking when refueling.

Features of the discovery of magnetic models (Viomi) T1, Youpin Pro)

Magnetic dispensers are the most sophisticated, and their cover is fixed by invisible magnets, and they require simultaneous shifting and lifting.

1. Put the dispenser on your side so that the nose looks to the left, which will make it easier to access the locks.
2. Find the recesses on the side walls of the cover (usually they are located symmetrically at the level of the lid). 1/3 height).
3. Press these grooves inward (to the center of the lid) with effort. ~1.5 kg.
4. Without letting go of your fingers, move the lid to the left (in the direction of the nose) by 3-5 mm.
5. Lift the lid upwards – the magnets must detach.

Video instructions for clarity:

Video: How to Open Viomi T1 20 seconds (with timecodes for each step).

Frequent errors:

• ❌ Trying to unscrew the magnetic cover - it breaks the fixtures.
• ❌ Pressing only one side - the cover will not move.
• ❌ Using a knife for tampering - leaves traces and can damage the seal.

💡

If the magnets are too tight, put the dispenser in the freezer for 10 minutes. The cold will weaken the magnetic field, and the lid will open easier. Don't forget to dry the device for 1 hour at room temperature after that.

Models with latches: secrets of opening without breakage

Plastic latch dispensers (Mijia Lite, Xiaomi Smart Pump) require precise pressing of hidden buttons, the main problem being invisible latchers that are easy to break with the wrong effort.

Instructions for Mijia Lite:

1. Turn over the dispenser and find two small holes on the bottom (near the label).
2. Insert paper clips or toothpicks to a depth of 5-7 mm.
3. Press up (to the lid) at the same time before clicking.
4. Pull the lid on yourself - it should separate without resistance.

For Xiaomi Smart Pump:

• 🔹 The latches are located on the side under rubber plugs.
• 🔹 Press the plugs inside and pull the tank up.

⚠️ Attention: If the latches don't work, don't increase the force, it will lead to cracks in the plastic. 80% of the time, the problem is with the dried soap that glued the mechanism together. Rinse the dispenser with warm water (no detergents!) and try again.

💡

For latch models, it's critical to press upwards, not sideways. The lateral force breaks the plastic guides, making the device non-repairable.

Cleaning and filling the dispenser: what can and can not be done

After successful opening, it is important to properly service the device to avoid breakdowns in the next use.

Cleanup:

• 🧼 Use only water or a weak vinegar solution (1 part vinegar per 10 parts water). Alcohol and acetone destroy seals.
• 🧽 To clean the pump, use cotton swabs dipped in water. Do not use metal objects.
• 🔄 After cleaning, dry all parts 24 hours at room temperature. Humidity inside the case is the main cause of corrosion of contacts.

Gas station:

• 🚫 Do not mix different types of liquids (such as shower gel and liquid soap) – this leads to the formation of lumps that clog the pump.
• 📏 Fill the tank by no more than 90% - when heated, the liquid expands and can leak.
• 🔋 For models with battery (Viomi) T1) after refueling, be sure to restart the device through the application (Settings) → Reboot. This will drop the level sensor errors.

Frequent Mistakes and How to Avoid Them

Analysis of service center calls shows that 9 out of 10 Xiaomi dispensers are due to improper opening or maintenance, and the most common errors and their consequences are:

• 🔧 Trying to unscrew a magnetic model → - failure of the thread (if it is decorative) or damage to the magnetic fixers (~1200 rubles.).
• 💦 Water on contacts (when cleaning) → Correction: 48 hours of rice drying or board replacement (~2500 rubles.).
• 🧴 Use of thick gels → Pump clog. Correction: disassembly and flushing (in service) ~800 rubles.).
• 🔋 Low charge refueling (<15%) → Correction: Full charge and reset settings.

If the dispenser stopped working after your manipulations:

1. Check the seal seal seal - it could move during assembly.
2. Reset the settings in the Mi Home app (Device) → Settings → Reset).
3. If the pump does not pump the liquid, rinse it with distilled water (3-5 cycles).

FAQ: Answers to popular questions