How to open the tray for SIM-maps in Xiaomi 11T: photo-instruction

Xiaomi Smartphone 11T It is equipped with a hybrid tray for two nano-SIMs or one SIM + microSD, but its extraction could cause difficulties for new owners. IP53 This article is about 3 working ways to open the tray (including emergency without tools), common errors that cause the latch to break, and tips for contact care. SIM-map.

If you have just purchased the Xiaomi 11T or are planning to change carriers, it is important to know that improper removal of the tray can damage the mechanism or even affect the water protection of the device. We will understand where the hole for extraction is, which tool will work best, and what to do if the tray is jammed.

—— • —— • ——

Where is the tray for SIM-maps in Xiaomi 11T?

Xiaomi. 11T slot SIM-The map is located on the left end of the case, which is a standard place for most of the brand's smartphones. The hole for extracting the tray marked with a small dot next to the volume button, which is easy to miss if you don't know where to look: The hole diameter is only 0.8 mm, and the color often merges with the body (especially in the black and gray versions of the device).

In order not to confuse the tray with a microphone or other connector, focus on the following signs:

• 📍 Location: between the volume button and USB-Type C, closer to the upper edge.
• 🔍 Labeling: There may be a barely noticeable icon next to the hole SIM-maps (magnifying glass will help you see them).
• 🎨 Color: in the white version of Xiaomi 11T The hole is more contrasting than in the dark versions.

If you can't find a slot, try flashlighting it or using a magnifying glass. In rare cases, the hole can be closed with factory film, and it needs to be carefully removed so as not to damage the case.

What tool is needed to open the tray?

The manufacturer recommends using a standard paper clip for SIM-The map that comes with Xiaomi 11T. But any other thin object with a pointed end will do, and the key is that the tool meets the three criteria:

1. The diameter is not more than 0.8 mm (thick clip or pin will not fit).
2. Durability – plastic or wooden sticks can break inside the hole.
3. Smooth surface without burrs, so as not to scratch the body.

Here’s what you can use instead of a brand nameplate:

• 📎 Office paperclip: unwind it so that the end is straight and thin.
• 🧷 Sewing needle: Suitable for emergencies, but act carefully - it is sharp.
• 🔧 Special key: sold in electronics stores (for example, SIM Eject Tool).
• 📱 Paperclip from another smartphone: if you have an old phone, its accessory will fit.

⚠️ Warning: Do not use scissors, knives or other cutting objects! they can damage the O-ring around the hole, which will reduce dust protection (IP53).

If there is nothing suitable at hand, in the next section we will tell you how to do without the tool.

Method 1: Standard extraction by means of a paper clip

This is the official method recommended by Xiaomi. Follow the instructions Step-by-step:

1. Turn off your smartphone. This is not necessary, but it reduces the risk of contact damage when you remove the tray.
2. Put the paper clip in the hole at a 90 degree angle to the body, push it to the end, it should be a slight click.
3. The tray will extend 1-2 mm. Carefully pull it with your fingers until completely removed.

If the tray does not come out the first time:

• 🔄 Check if the stain in the hole has broken.
• 💪 Increase the power of the push (but without fanaticism – the mechanism is fragile!).
• 🔍 Examine the hole for contamination (dust or dirt may block the mechanism).

Turn off the phone (optional)

Prepare a paper clip or needle

Find the hole on the left end

Push until you click.

Carefully pull out the tray-->

If a paper clip breaks inside the hole, don't try to pull it out with tweezers -- go to the service center.

Method 2: Extract without a tool (emergency method)

In Xiaomi 11T, you can remove the tray without a paper clip using a thin thread or fishing line, which is suitable if you do not have a tool at hand, but you need to be careful.

• 🧵 Thread (preferably capronic or dental floss).
• 🧲 Magnet (optional, but will help).
• 📏 Scotch or tape.

Step-by-step:

1. Cut a piece of thread 10-15 cm long. fold it in half for strength.
2. Attach one end of the thread to a small magnet (or wrap with tape to make a “hook”).
3. Carefully put the thread into the hole to extract the tray, move it back and forth until you feel resistance.
4. Pull the string on yourself - the tray should move.

⚠️ Attention: This method is risky for beginners, and if the thread slips, it can damage the O-ring or get inside the body.

An alternative is to use duct tape (such as scotch):

1. Cut a strip of scotch 3-4 mm wide.
2. Fold it with the sticky side outside and put it in the hole.
3. Stick it to the tray and pull it.

These methods require patience, but in 80% of cases they help to avoid going to the service center.

Method 3: Software extraction (for advanced users)

Few people know, but in Xiaomi 11T, you can push the tray out with an engineering menu, which requires no physical impact, but is only suitable for experienced users. Wrong actions can lead to a reset!

Instructions:

1. Open the phone app and enter the combination: ##4636##
2. In the menu that opens, select Phone Information.
3. Scroll down and find the Throwaway item. SIM-maps (or Eject) SIM).
4. Click on it - the tray should move automatically.

If the item Throwaway SIM-No card, try another code:

##7465625##

⚠️ Note: Not all firmware MIUI If nothing happens after you enter the code, don't try again, it can block the code. SIM-map.

This method is useful if the tray mechanism is jammed, but it does not work on phones with corrupted software.

What if the tray is jammed?

If the tray is not put forward by any of the methods, the reasons may be as follows:

If the tray is stuck inside:

1. Try to move it carefully in different directions.
2. Light a flashlight - you can see the edge of the tray, which you can grab with tweezers.
3. If nothing helps, don’t apply force – it can damage the motherboard.

How do you put the tray back in?

Installation of the tray requires no less care than the extraction.

• 🔄 Check that SIM-card inserted into the tray contacts down (the tray has a scheme).
• 📏 Make sure the tray enters the groove smoothly, without distortions.
• 💪 Press the tray until the characteristic click (no gaps should remain).

Common mistakes:

• ❌ Insert the tray at an angle - this deforms the mechanism.
• ❌ Use force if the tray does not enter - check if installed correctly SIM-map.
• ❌ Close the tray if the phone is turned on – this can cause network failure.

After installing the tray, restart the phone to SIM-If the network doesn't show up, check it out:

• Correct installation of the card (sometimes it falls out of the slots).
• Network settings in Settings → SIM-maps and mobile networks.
• Possibility of work SIM-card on another phone.

💡

If the tray is tightly in, lubricate its edges with silicone lubricant (not oil!).This will make it easier to extract in the future and protect against corrosion.

FAQ: Frequent questions about the SIM tray in Xiaomi 11T

💡

If the tray is for SIM-maps in Xiaomi 11T stop clicking or pushing, do not apply force - in 90% of cases, the problem is solved by cleaning the mechanism or replacing the seal.