Why would you want to see Xiaomi Mi TV 5?
Xiaomi Mi TV 5 is known for its stylish design, high resolution 4K and affordable price. However, even the most reliable technology sometimes requires intervention, from simple dust cleaning to replacing broken components. Disassembling the TV is not an easy task, especially if you have never held an electronic screwdriver in your hands before, but even a beginner can cope with the right instructions and patience.
The main reasons why users decide to disassemble Xiaomi Mi TV 5:
- 🔧 Replacement of the matrix after mechanical damage (cracks, broken pixels).
- 🔌 Power supply repair is one of the most frequent failures in power surges.
- 🧹 Cleaning from dust that accumulates inside the housing and leads to overheating.
- 🔊 Replacement of speakers or audio amplifier when sound is distorted.
- 📡 Upgrade: Installation of additional modules (e.g. TV- tuner).
It is important to understand that disassembling the Xiaomi Mi TV 5 will automatically cancel the warranty if it is still valid. If your device is warranty serviced, you should contact the service center. For everyone else, this article will help avoid errors and keep the device working.
Preparation for disassembly: tools and security measures
Before you start, gather everything you need, and if you don't have the right tools, you can damage the body or the internal components, and here's the minimum set.
- 🔨 Plastic blades (or mediators) for disconnecting latches.
- ⚒️ Cross screwdriver (usually PH2 or PH1).
- 📏 Screen-removal suction cup (if you plan to work with a matrix).
- 🧲 Magnetic mat or screw container (so as not to lose small details).
- 🧤 Antistatic bracelet (will protect boards from static electricity)
- 📸 Smartphone for photographing the process (useful when reassembling).
Safety first! Xiaomi Mi TV 5 contains high-voltage components, even when switched off.
⚠️ Warning: Before disassembling, be sure to turn off the TV and wait at least 10 minutes. The capacitors in the power supply can store a charge that can deliver an electric shock.
| Tool. | Appointment | Where to buy |
|---|---|---|
| Plastic blades | Unscratched separation of the shell latches | Electronics stores, AliExpress |
| Antistatic bracelet | Protection of boards from static discharge | Radio shops, Ozon |
| Screen suction cup | Safely remove the matrix | Service centers, Amazon |
| Setting of screwdrivers PH1/PH2 | Screws in shell and anchorages | Any hardware store |
If you've never taken a TV apart, practice on old tech or watch Xiaomi Mi TV 5 video demos on YouTube. Notice the location of the latches, which often break when you open them sloppy.
💡
Before starting work, place the TV screen down on a soft surface (such as a towel) to avoid scratching.
Step-by-step: how to remove the back cover
The back cover of the Xiaomi Mi TV 5 is mounted on latches and screws, the main difficulty is not to break the plastic locks.
- Place the TV on a flat surface with the screen down, make sure there's enough room around for maneuver.
- Unscrew all visible screws around the perimeter of the lid. In Mi TV 5, it's usually 8-12 screws (depending on the diagonal). Use a PH2 screwdriver.
- Insert a plastic blade into the gap between the lid and the body (start at the bottom corner). Carefully drive the blade along the perimeter, snapping the locks.
- When all the latches are free, lift the lid up. Be careful: it may be attached to the plumes (for example, from the control buttons).
If the lid doesn't lend itself, don't force it! You probably missed the screw or the latch. Check the hull again for hidden mounts.
☑️ Check before removing the lid
⚠️ Warning: In the Mi TV 5 Pro and Mi TV 5X models, the back cover may have additional metal clips. They can't bend, just gently snap!
Once you remove the lid, take a picture of all the boards and cables, which will help with the reverse assembly.
- 🔌 Power supply (usually bottom left).
- 📺 Mainboard (main board with processor).
- 🔊 Audio amplifier (near speakers).
- 📡 Wi-Fi/Bluetooth module (small board with antennas).
What to do if the latch breaks?
Access to internal components: what can be repaired independently
When you take the lid off, you'll see the insides of the TV, and don't be afraid of the number of wires, most of them going to the matrix and the speakers, and let's see which components can be repaired or replaced without any special skills.
1. Power Board (Power Board)
The most common cause of malfunctions is bloated capacitors or burned resistors.
- 💥 The TV doesn't turn on at all.
- 🔄 Spontaneously shuts down after a few seconds.
- 💡 The power indicator flashes red.
If you see swollen capacitors (the top of them is convex), you can replace them with similar ones with the same capacity and voltage, and you need a soldering iron and solder.
2.Mainboard (Mainboard)
It's responsible for signal processing and TV control, typical problems.
- 📺 No image, but there's sound.
- 🔄 getting stuck when activated.
- 🖥️ Artifacts on screen (strips, snow).
Mainboard repairs are complicated, and often they're just replaced with a new one, but you can try:
- 🔧 Flash through USB (if the problem is in the software).
- 🧹 Clean contacts with alcohol (oxidation may cause malfunctions).
3. Matrix and backlight
If you have broken pixels, vertical stripes or dark spots on the screen, it is the matrix or backlight system that is to blame. Replacing the matrix is an expensive procedure (sometimes it is cheaper to buy a new TV), but you can change the backlight (LED-Zlents) yourself.
💡
Before replacing components, always check their compatibility with your Xiaomi Mi TV 5 model. For example, Mi TV 4S power supplies won’t work!
Common Mistakes in Disassembly and How to Avoid Them
Even experienced craftsmen sometimes make mistakes that lead to additional breakdowns.
- Too much pressure on the shoulder blade → cracks the latches or breaks the body. Solution: use two shoulder blades simultaneously to distribute the load.
- Losing screws → is left with the parts that are "extra" when you build them, so you can put them in a magnetic container or stick them on tape to the paper that's marked.
- The plume damage → screen stops working. Solution: Before you unplug the plume, take a picture of the plume's position and gently pull the plastic connector instead of the wires.
- Forgetting to turn off the antenna cable →, it clings to the boards and can damage them. Solution: unplug all the external cables before disassembling.
Another common problem is static electricity, and even a small discharge can disable sensitive chips, always use an antistatic bracelet or at least touch the metal body of the system unit (if it is grounded) before picking up the boards.
⚠️ Warning: If the TV stopped turning on after disassembly, check: 🔌 Is the power supply properly connected to the Mainboard. 📌 Are the contacts in the plume connectors bent. 🔋 Have you forgotten to plug in the power button (if you disconnected its plume).
How to Get the TV Back: Tips and Checks
Building is as responsible as disassembly. Follow these tips:
- Check if all screws are in place. Xiaomi Mi TV 5 may not turn on if at least one screw is missing (especially in the power supply).
- Make sure all plumes are connected before the click.The loose connection leads to artifacts on the screen.
- When you close the lid, start by snapping the corners, then gently press the center. Don't push too hard, the plastic can crack.
- Don't turn on the TV immediately after assembly. Wait 5-10 minutes to make sure all contacts are seated.
First incorporation after repair:
- 🔴 If the indicator is not on, check the power supply.
- 🟡 If the indicator flashes yellow, there is a problem with Mainboard or firmware.
- 🟢 If the TV is turned on but no image, check the matrix plumes.
If it works, congratulations! You've done well. If you haven't, don't panic. Check all the connections or see a specialist with a picture of your guts (this will speed up your diagnosis).
💡
Once assembled, test the drive with the USB- plugged in, and if the TV recognizes the flash drive, the Mainboard is working correctly.
When is the best time to contact the service center
Not all breakdowns can be repaired on their own, but here are some cases where you can trust the professionals:
- 💻 Mainboard problems: If the TV is not turned on, but the power supply is in good condition.
- 🔥 Burnt tracks on boards: A soldering station and experience with SMD- components is required.
- 📉 Fall from height: several components may have been damaged at the same time.
- 💧 Liquid ingestion: Corrosion can spread to multiple boards.
Xiaomi service centers in Russia and the CIS usually charge for diagnosis from 500 to 1500 rubles.
| Type of repair | Cost (₽) | Date(s) |
|---|---|---|
| Replacement of the power supply | 2 000 – 4 000 | 1–2 |
| Mainboard repairs | 3 500 – 8 000 | 3–7 |
| Replacement of the matrix (43–55) | 15 000 – 30 000 | 5–10 |
| Dust cleansing | 1 000 – 2 500 | 1 |
If you're in doubt, it's best not to take risks. Xiaomi's modern TVs contain many fragile components, and a single mistake can turn into expensive repairs.