How to open a container for dust in the robot vacuum cleaner Xiaomi Vacuum Mop P: instructions with nuances

Robot vacuum cleaner Xiaomi Vacuum Mop P (models) STYJ02YM, STYTJ02ZHM It has a removable dust collection container that requires regular cleaning, but many users have difficulty opening the dust collector for the first time: the latches do not respond, the lid does not remove, and the instructions do not contain detailed illustrations. If you are afraid to break the mechanism or are not sure how to properly remove the container without damage - this article will help you understand all the nuances of the container.

The procedure seems simple, but there are hidden points. For example, not everyone knows that before opening the container, you need to turn off the vacuum cleaner, and after extraction, check the condition of the filter and sealing gums. It is also important to consider the firmware version: new updates to Mi Home have tips for care, but they are not always intuitive. Next we will analyze the step-by-step algorithm, errors and give tips for extending the life of the dust collector.

To avoid common problems (for example, when the container “sticks” due to accumulated moisture or dust), just follow a few rules. But first, we will understand the anatomy of the Xiaomi Vacuum Mop P dust collector, which will help to understand where the latches are located and how they work.

Previous articleDust container in Xiaomi Vacuum Mop P: what’s inside?

The dust container in this model consists of several key elements, each of which performs its function:

• 🔹 The main case is a plastic container of 0.4 liters, where garbage gets into it. ABS-plastic, but with strong mechanical influence can crack.
• 🔹 The latched lid is fixed to two plastic clamps, and this is where users often make the mistake of trying to open the container by force.
• 🔹 HEPA-filter - located inside the container, traps fine dust and allergens, requires replacement of each 2-3 months (or more often if the vacuum cleaner is used intensively).
• 🔹 The sealing gum, which is tight, can lose elasticity over time, leading to dust leaks.
• 🔹 Fill sensor – in some versions of the firmware, it notifies you to clean through the Mi Home application.

The Xiaomi Vacuum Mop P features a combined garbage collection system, which first enters the cyclone filter (where large particles are separated), and then into the main container. If you do not clean it in time, the vacuum cleaner's performance drops. 30-40%, The engine is operating at a higher load.

Owners often confuse a dust container with a water tank (if the model supports floor washing function). It is important to remember that the vacuum collector is always on the right (when you look at the vacuum cleaner from the front), and the water tank is on the left.

⚠️ Note: If your Xiaomi Vacuum Mop P suddenly becomes worse at sucking dust, but the container is empty, check the cyclone filter (it is under the container lid.

Step-by-step: how to open a container for dust

Now, let's get to the practice. Follow this algorithm to avoid breakdowns.

1. Turn off the vacuum cleaner. Press and hold the power button on the case for 3 seconds until the indicator goes out. This will prevent accidental start-up during cleaning.
2. Take the container out. Take the handle on the top of the dust collector (which is closer to the back of the robot) and pull up and a little bit on yourself. Don't put too much effort into it -- if the container doesn't respond, check if it's locked by the sensor (more on that below).
3. Open the lid. Press the two latches on the sides at the same time (marked with arrows or dots) and pull the lid upwards. Don't try to move it sideways, it will cause the mounts to break.
4. Remove the garbage. Turn the container over the trash can and tap it lightly. Use a soft brush (like a toothbrush) to clean it thoroughly, and it won't damage the plastic.

If the lid does not open even after pressing the latches, check:

• 🔍 Do they have any visible damage to the clamps (sometimes they break when handled carelessly).
• 🔍 Has any moisture accumulated inside the container (for example, after washing the floors), in which case, dry it for at least 24 hours before re-installing it.
• 🔍 Does not block the cover filling sensor (in some firmware it can "stick»).

Is the vacuum cleaner off?

Are your hands dry (wet fingers can slip)?

Are there any visible damage to the latches?

Is there a place for garbage disposal (bucket, bag) prepared?

-->

After cleaning, set the container back, making sure that:

1. The lid is tightly closed (a click should sound).
2. The filter is installed correctly (the arrow on it should look up).
3. The sealing gum is not twisted or torn.

⚠️ Warning: If the vacuum cleaner gives an E5 error after installing the container (a vacuum collector problem), check if the debris has got into the infrared sensor on the robot body.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when handling a container, and here are the most common ones and ways to solve them:

One of the most insidious mistakes is using water to clean a container, and many people wash it under the tap without removing the filter, which leads to:

• 💧 Corrosion of metal parts inside.
• 💧 Swelling HEPA-filter (it becomes unusable for use).
• 💧 Loss of sealing rubber.

Critical: In the Xiaomi Vacuum Mop P models with wet cleaning function, the dust container is NOT designed to come into contact with water. Even a drop of moisture trapped on the filling sensor can cause false positives or E1 error.

💡

If the container is heavily contaminated, use a narrow-fill vacuum cleaner or compressor (at minimum power) to clean it, which is safer than washing with water.

How to Clean a Container: Tips for Extending the Life of a Container

Regular cleaning of the container not only maintains the efficiency of the vacuum cleaner, but also prevents breakdowns.

• 🧹 Clean the container after each cleaning, and even if it is not full, fine dust settles on the walls and filter, reducing suction.
• 🧽 Use dry cleaning methods. As mentioned, water is the enemy of electronics and filters. Use sticky roller or scotch to remove sticky dirt (such as animal hair) to remove sticky roller or scotch.
• 🔄 Change. HEPA-filter-in 2-3 In high dust conditions (for example, during repairs) - more often. Original filter for Xiaomi Vacuum Mop P has an article ZSTY002.
• ☀️ Dry the container outdoors. If the vacuum cleaner was used for wet cleaning, leave the container open to the air. 12-24 hour to avoid mold.

For deep cleaning (once in a 1-2 You can use special cleaning wipes for electronics or antistatic sprays, which remove static electricity, which attracts dust to the walls of the container. Do not use aggressive detergents (such as Domestos or Whiteness) – they corrode plastic and rubber seals.

If you notice that the container began to emit extraneous sounds (squeaking, crackling) when the vacuum cleaner is working, this may indicate:

• Getting large debris (for example, coins, buttons) into the mechanism.
• Wear of fan bearings (requires professional repair).
• A crack in the container case (replacement needed).

Replacement of filter and sealing gum: when and how?

Filter and sealant are consumables that directly affect the quality of cleaning, and their wear and tear is manifested by the following symptoms:

• 🌫️ The vacuum cleaner became worse to suck in fine dust.
• 🌫️ The robot smells musty (especially after wet cleaning).
• 🌫️ There are traces of dust on the floor even after the vacuum cleaner passes.

Filter replacement procedure:

1. Remove the dust container (as described above).
2. Open the lid and remove the old filter (located at the top of the container).
3. Install a new filter, making sure that the arrow on it is pointed upwards.
4. Close the lid before you click.

The sealing gum is harder to replace, and it's mounted in a groove around the perimeter of the container.

1. Carefully tuck old rubber band with a plastic spatula (do not use metal objects!).
2. Remove the glue residues (if any) with an alcohol napkin.
3. Insert the new rubber band into the groove, starting at the corner, and make sure it lies flat, without torsion.

The cost of original consumables for Xiaomi Vacuum Mop P (2026):

⚠️ Note: When buying consumables, check compatibility with your model. for example, the filter from Xiaomi Vacuum Mop 2 Pro (ZSTY004) It is not suitable for Vacuum Mop P, it is larger in size.

What to do if the container is jammed?

The situation when the container is not removed or opened is frightening for many users, most often because:

• 🔧 Getting large debris (hair, thread, wool), which blocks the mechanism.
• 🔧 Deformation of plastic due to overheating (for example, if the vacuum cleaner has been operating in maximum power mode for too long).
• 🔧 Corrosion of metal parts (if the container was stored in a wet room).

Algorithm of action if the container is jammed:

1. Turn off the vacuum cleaner and disconnect it from the docking station.
2. Try to gently swing the container left and right while pulling up. Don't put too much effort into it!
3. If it doesn't work, turn over the vacuum cleaner and look around the container, and maybe the garbage got into the slots.
4. In extreme cases, disassemble the body of the vacuum cleaner (this will require a screwdriver). T5), to get to the fixing mechanism.

If the container opens but the lid is “stopped,” try the following:

• 🔥 Heat the place of the junction of the cover and the case with a hairdryer (temperature not higher than 50)°C).
• 🔥 Drop a few drops of silicone lubricant (for example, WD-40 Specialist) in the gaps and wait 10 minutes.
• 🔥 Carefully tuck the lid with a plastic mediator (not a knife!).

💡

If the container cannot be removed by yourself, DO NOT use force, contact the service center. Damage to the locking mechanism can lead to complete inoperability of the vacuum cleaner.

Prevention: How to avoid container problems?

To make the dust container last a long time and not cause trouble, follow these tips:

• 🛡️ Do not overload the vacuum cleaner. Optimal operating mode — 1-2 day-cleaning 30-40 Continuous work more than 1.5 The clock leads to overheating and deformation of plastic.
• 🛡️ If the vacuum cleaner always returns to base, the container is less likely to be mechanically damaged.
• 🛡️ Keep consumables dry. Filters and rubber bands spoil from moisture - keep them in a sealed bag with silica gel.
• 🛡️ Check the container for sharp objects. Paperclips, nails or glass can pierce the dust collector.

It is also useful to set up alerts in the Mi Home app:

If you use a vacuum cleaner to clean building dust or animal wool, clean the container after each use.These types of debris quickly clog the filter and can disable the engine.

FAQ: Answers to Frequent Questions