How to get it right SIM-Map from the Xiaomi phone: detailed instructions with a photo

Extraction SIM-Xiaomi smartphone cards seem like a simple task, but in practice users face typical problems: a jammed tray, a lost key or the fear of damaging the device. SIM + In this article, we will discuss all the ways to safely extract a card, from the standard procedure to emergency methods, if the tray is not extended.

It is important to consider that the design of trays Xiaomi differs depending on the series. for example, flagship Xiaomi 13/14 have reinforced metal guides, and budget Redmi Note plastic, which is easier to deform. We have compiled universal recommendations that will suit 95% of the models of the brand, including POCO and Black Shark, and also separately focus on the nuances for devices with embedded SIM (eSIM).

If you have never removed a tray before, we recommend that you first familiarize yourself with the safety rules, which will protect you from common mistakes, such as using inappropriate tools (needle, knife) or applying excessive force. For a visual understanding of the process, the article contains layout of trays in popular models.

What tools will you need

For standard extraction SIM-Xiaomi cards have a pretty good branded key-clip that comes with the phone, but if it's lost, alternatives are good:

• 🔑 Paperclip or stationery pin - unwind it so that the end is straight and thin (diameter not more than 0.8 mm).
• 📍 Syringe needle – suitable for models with a deep hole (for example, Xiaomi Mi 11).
• 🔧 Special key for SIM — Sold in electronics stores (cost) ~50₽).
• 💳 Plastic card - only for emergencies, if the tray is extended half (more in the section of emergency recovery).

⚠️ Warning: Never use metal objects with serrated knives (knives, scissors) - they scratch the body and can damage the tray contacts. Also avoid magnetic tools: they can disrupt the Hall sensor in some models (for example, Xiaomi Mix Fold).

If you plan to change frequently SIM-cards (for example, when traveling abroad), it is worth buying a magnetic key - it is attached to a bunch of keys and always at hand. POCO F5 or Redmi K60 with a reinforced tray, we recommend using only a branded tool - plastic analogues can break when pressed.

Standard extraction procedure SIM-map

The algorithm for most Xiaomi models (including Redmi 9/10/11, POCO X3/X4/X5, Xiaomi 12/13 Lite):

1. Turn off your phone (optional, but recommended for safety).
2. Find the hole to extract the tray - it is located on the upper or lateral face (see the diagrams below).
3. Put the key in the hole until you feel a slight click.
4. The tray will extend 2-3 mm - carefully pull it with your fingers.

⚠️ Warning: If the tray does not extend after pressing, do not apply force - in 80% of cases the problem is in the clogged hole.

For models with a hybrid slot (for example, Redmi Note 12 Pro+), consider:

• 📱 If two nano-SIMs are installed, the tray is removed entirely.
• 💾 If you're not the second SIM microSD is used, the memory card is fixed with a latch - do not pull it up, but move it to the side.

Schemes of location of trays in popular models

Location of the slot for SIM-The following are the current schemes for modern Xiaomi smartphones (2020-2026.):

For devices with built-in SIM (eSIM) (e.g. Xiaomi 13 Lite in some regions) the physical tray may not be available. SIM It is carried out through the Settings menu → Mobile network → Management SIM-If you need to completely remove eSIM, you will need to reset your network settings:

Settings → Memory and backups → Resetting settings → Resetting network settings

What to do if the tray is jammed

If the tray is not pushed after pressing the key, the reasons may be as follows:

• 🔧 Dust/mud is the most common problem in devices older than 1 year old. Solution: blow the hole with compressed air (a canister for cleaning equipment) or clean it gently with a thin needle.
• 💧 Moisture gets in, it corrodes the mechanism. Solution: Put the phone in a silica gel bag for 12 hours, then try to remove the tray.
• 🔨 The tray is deformed when it is not properly removed. Solution: contact the service center (self-repair can damage the motherboard).
• 🔋 Battery discharge – some models (e.g. Xiaomi Mi 10) lock the tray at critical charge level.Solution: plug in charge for 10-15 minutes.

⚠️ Warning: If the tray is halfway out but stuck, don't try to pull it out with pliers, it deforms the guides:

1. Take a plastic card (for example, a bank card).
2. Carefully wind it between the tray and the body.
3. Smooth movement move the tray towards the extraction.

For models with an aluminum body (for example, Xiaomi 12S), do not use metal objects - they leave scratches. In extreme cases, you can use a suction cup (sold in phone repair kits):

1. Press the suction cup against the tray.
2. Pull up with even effort.
3. As soon as the tray moves, put your nail on it.

💡

If the tray is jammed due to a drop in the phone, check the integrity of the case around the slot.Cracks can block the mechanism - in this case, a replacement of the rear panel is required.

Features of working with eSIM in Xiaomi

Xiaomi devices with eSIM support (e.g. Xiaomi 13 Lite) 5G, Xiaomi 12T Pro) allow virtual activation SIM-There's a nuanced map without a physical tray:

• 🌍 Regional restrictions – eSIM may not be supported in some countries (e.g. China).
• 🔄 Limit the number of profiles – most models allow you to save up to 5 eSIM profiles, but only 1 is active at the same time.
• 📱 Profile transfer – when changing the eSIM phone, you need to manually transfer it through the QR-code.

To remove eSIM from the device:

1. Go to Settings → Mobile Network → SIM-card management.
2. Select the eSIM profile that you want to delete.
3. Click Delete and confirm the action.

⚠️ Warning: Deleting the eSIM profile permanently erases it from the device. To re-activate the service, you will need a new one. QR-Some providers (e.g. MTS, Beeline) allow you to restore a profile through your personal account, but this takes up to 24 hours.

If you plan to use both a physical SIM and an eSIM at the same time, consider:

• 📶 In mode. DSDS (Dual SIM Dual Standby: Both cards are active, but only one can use mobile internet.
• 🔋 Battery consumption increases by 10-15% when working with two SIM.

Safety rules for extraction SIM-map

Failure to follow simple rules can damage the tray, contacts, or even the motherboard.

• ⚡ Do not remove the tray when the phone is on if it is running a software update or if the call is active.
• 🔥 Do not use an open fire (lighter, matches) to heat the case - this will melt plastic parts of the tray.
• 💦 Avoid wet conditions – do not remove them. SIM In the rain or in the bath, when you get moisture on your contacts, it causes corrosion.
• 👶 Hold your phone tightly – if it slips out of your hands when you remove the tray, your screen or camera may be damaged.

Particular care should be taken with models with a folding design (for example, Xiaomi Mix Fold 2/3):

• 📄 Do not open the tray when the phone is folded - this can warp the loop.
• 🔄 After extraction SIM Always make sure that the tray is in place smoothly, without distortions.

If you change often SIM-Cards (for example, when traveling abroad), we recommend:

• 🔄 Use a nano-SIM adapter to avoid removing the tray every time.
• 📱 Activate the roaming packet from the operator to avoid frequent card changes.

💡

Before extraction SIM-Always check that the phone is not connected to charging – static electricity can damage the tray contacts.

Specifics for old and rare Xiaomi models

Xiaomi devices released before 2018 (for example, Xiaomi Mi 5, Redmi 4X), have the design features of trays:

• 📏 Size SIM-cards – some models use micro-SIM (e.g. Xiaomi Mi 3) rather than nano-SIM.
• 🔧 Metal tray - in Xiaomi Mi 2/2S The tray is completely metal and requires more effort in extraction.
• 🔄 No hybrid slots in Redmi 3S and older than microSD and SIM slot-installed.

For models with a non-removable battery and integrated tray (for example, Xiaomi Mi Max), the SIM extraction procedure is different:

1. Turn off the phone and remove the back cover (need a mediator).
2. Carefully tuck the tray with SIM-map, it's fixed with a latch.
3. Do not apply force to the camera plumes and speaker.

⚠️ Note: In Xiaomi Mi Note models (2015–2016) trays for SIM It's under the battery. It needs to be retrieved:

1. Remove the back cover (suction cup + mediator).
2. Disconnect the battery plume (use a plastic tool!).
3. Carefully remove the tray without touching the contacts of the motherboard.

If you own Xiaomi Mi, A1/A2 (devices on pure Android), keep in mind that in these models the tray is pushed out with greater effort than in the case of the MIUI-This is due to the design of the case, licensed from Google.

Frequent questions