How to get a filter from the vacuum cleaner Xiaomi: instructions for all models

Xiaomi vacuum cleaners are some of the most popular cleaning assistants due to their combination of technology and affordable price. However, even the most advanced equipment requires regular maintenance, and replacing or cleaning filters is one of the key procedures to maintain performance. If you notice that the vacuum cleaner has become worse at sucking dust, has an unpleasant smell or increased energy consumption, chances are it's time to start using the filter system.

In this article, we will discuss how to properly remove filters from different models of Xiaomi vacuum cleaners (including Dreame and Deebot sub-brands), what tools you may need, and what to look for to avoid damaging the device. HEPA-filters, washable pre-filters and cyclone elements – their design and methods of extraction can differ significantly depending on the model.

Important: The filter extraction procedure in Xiaomi vacuum cleaners does not usually require special skills, but some models (e.g. Mi Robot Vacuum-Mop 2 Pro or Dreame) do not require special skills. V12) They have hidden latches or non-obvious fastening mechanisms, and if you've never taken a vacuum cleaner apart before, we recommend that you read the instructions for your particular model first, which will save you time and nerves.

What filters are installed in Xiaomi vacuum cleaners and where they are located

Xiaomi vacuum cleaners are equipped with several types of filter elements, each of which performs its function, their location and design depend on the type of device:

• 🔄 Cyclone filter (separator) – installed in vertical vacuum cleaners (for example, Mi Handheld Vacuum Cleaner or Dreame) V11). It's responsible for separating the large debris from the air during the first filtration phase, usually located at the top of the dust collector.
• 🧹 Prefilter (washable) - found in most models, it is a fine mesh or sponge that traps medium dust particles, most often under a cyclone filter or in a separate compartment.
• 🌬️ HEPA-The filter is a key element that traps microparticles (including allergens and bacteria). In vacuum cleaners, Xiaomi is usually located in the outlet air tract, the engine. In some models (for example, Deebot). T20 Omni) HEPA-filter integrated into the dust collector.
• 💧 Water filter (in cleaning vacuum cleaners) – present in hybrid models such as DreameBot W10. Prevents moisture from entering the engine and requires special care.

In most cases, filters are located in the following areas:

• 📦 Inside the dust collector (for vertical and robot vacuum cleaners).
• 🔌 Behind the back cover of the body (in models with a remote HEPA-filter).
• 🔄 Under a cyclone separator (in hand vacuum cleaners).

To determine exactly where the filter is in your model, you can use official documentation or search by model number on the Xiaomi website. For example, for Mi Robot Vacuum-Mop P, the filter layout is different from Dreame. T30, Although both devices are robot vacuum cleaners.

Preparation for filter removal: what you need

Before you start disassembling, prepare everything you need to avoid damage and speed up the process.

• 🔧 Cross screwdriver (usually) PH2) — for models with screw mounting of the covers (for example, Dreame) V12).
• 🧼 Soft brush (dental or electronic cleaning) – to remove dust from filters and interior surfaces.
• 💦 Warm water and neutral detergent - if the filter is washed (not suitable for cleaning) HEPA!).
• 📸 Smartphone – to photograph the location of parts before dismantling.
• 🧤 Gloves - protection from dust and possible sharp edges of the body.

Also useful:

• 🔍 Flashlight – for illumination of hard-to-reach places (for example, in robot vacuum cleaners).
• 🧲 Magnetic screwdriver - convenient for working with small screws in compact models.
• 📏 Plastic blade - for careful snapping of latches (especially in Deebot).

⚠️ Warning: Never use metal objects (knives, screwdrivers) to slap plastic latches, this can lead to chipped or cracked housing. If the latches do not respond, check if another structural element blocks it.

If you plan to not only clean but also replace the filter, buy the original part in advance. For vacuum cleaners Xiaomi suitable filters with the label:

• FBJ4015GL — for most hand vacuum cleaners (e.g. Mi Handheld Vacuum Cleaner) 1C).
• DMF01 — HEPA-filter V10/V11.
• RVF007 — for robot vacuum cleaners of the Deebot series T/ozmo.

Step-by-step: how to get a filter from a hand vacuum cleaner Xiaomi

Xiaomi hand vacuum cleaners (e.g. Mi Handheld Vacuum Cleaner, Dreame) V9/V12) They have a similar design to the filter system, and let's look at a universal filter extraction algorithm.

Step 1: Disconnecting and disassembling the vacuum cleaner

Before the start of the work:

1. Turn off the vacuum cleaner with the power button.
2. If the model is networked (for example, Mi Vacuum Cleaner) G10), unplug the cord from the socket.
3. For battery models (Dreame) V11) Remove the battery by pressing the lock at the bottom of the handle.

Next, remove the dust collector:

1. Press the unlock button (usually located on the back of the case).
2. Pull the dust collector up to separate it from the main unit.

Step 2: Extract the cyclone filter and pre-filter

Inside the dust collector you will see:

• 🌀 Cyclone separator (cone-shaped plastic element).
• 🧽 Prefilter (metal mesh or sponge under the separator).

To get them:

1. Turn the cyclone filter counterclockwise (in most models) or press the lock on top.
2. Remove the separator and wash it under running water (if permitted by the instructions).
3. Under the separator is a prefilter - gently pull it upwards by the tongue or edges.

⚠️ Note: In some models (e.g. Dreame) V12) The prefilter is mounted on the latches. Don't pull it by force, press the side latches first.

Step 3: Getting there HEPA-filter

HEPA-Xiaomi hand vacuum filters are usually located in the outlet airway, the engine, to get to it:

1. Remove the back cover of the body (can be attached to latches or screws).
2. Inside, you will see a round or rectangular filter in the plastic case.
3. Press the lock or turn the filter counterclockwise (depending on the model).
4. Carefully remove it without touching the filter material with your hands.

The Mi Handheld Vacuum Cleaner 1C:

1. Take the dust collector off.


2. Open the back cover (2 screws PH2).




3. Remove the HEPA- filter by pulling the plastic handle.

Features of filter extraction in Xiaomi robot vacuum cleaners (Deebot, Dreame)

Xiaomi Robot Vacuum Cleaners (e.g. Deebot) T20, DreameBot L10) They're more compact, and filter access is different, and the main difference is the integrated dust collector, where the filters are often combined with the dumpster.

Step 1: Extract the dust collector

In most models:

1. Press the lid opening button (usually located on the top panel of the robot).
2. Get the garbage container out - it's usually fixed with a latch.

In some models (e.g. Deebot) N8 Pro) the dust collector is attached to magnetic locks - pull it up with little effort.

Step 2: Disassembly of the dust collector

Inside the container you will find:

• 🌀 Cyclone separator (in models with dry cleaning).
• 🧹 Prefilter (grid or sponge).
• 🌬️ HEPA-filter (can be built into the container cover).

For extraction:

1. Separate the cover of the dust collector (usually it is attached to the latches).
2. Remove the cyclone filter by pulling it up.
3. Underneath it is a prefilter - remove it by pressing the fixtures on the sides.
4. HEPA-The filter can be built into the lid itself – gently pull it out by pulling the plastic frame.

An example for Deebot T30:

1. Open the top cover of the robot.


2. Extract the dust collector (press the latch from the front).




3. Disassemble the container: remove the lid → remove the cyclone filter → remove HEPA from the groove.

⚠️ Attention: Robot vacuum cleaners with wash function (e.g. DreameBot) W10) The water filter is separately located, and it cannot be washed under running water, only washed in warm water with a mild detergent and thoroughly dried for at least 24 hours.

How to remove the filter in Xiaomi washing vacuum cleaners (DreameBot, Mi Mop)

Cleaning vacuum cleaners (for example, DreameBot) W10, Mi Robot Vacuum-Mop 2 Pro have a complex filtering system, because they have to cope with both dust and moisture. HEPA And pre-filters have a water filter that requires a special approach.

Step 1: Access to the main filter unit

In most models:

1. Remove the water tank (usually fixed by a latch on the back panel).
2. Under it is a block with filters - it can be attached to screws or latches.

Step 2: Extract HEPA and prefilter

The algorithm is similar to hand vacuum cleaners, but with nuances:

• HEPA-The filter is often located in a separate compartment with a rubber seal (to protect against moisture).
• The prefilter can be combined with a water separator – it must be washed after each cleaning.

Step 3: Cleaning the water filter

Water filters (if any) require delicate handling:

1. Remove it from the compartment by carefully pulling the plastic handle.
2. Wash under a weak stream of warm water (maximum 40)°C).
3. Do not use aggressive detergents - only a mild soap solution.
4. Dry for at least 24 hours in a ventilated place (not on a battery!).

In Xiaomi cleaners, the water filter cannot be dryed with a hairdryer or wiped with paper towels - this violates its structure and reduces its service life.

Cleaning and replacing filters: rules and mistakes

Removing the filter is half the battle, and it's equally important to clean it or replace it properly so that you don't shorten the life of the vacuum cleaner.

Washing filters (pre-filters, cyclone separators)

• 🚿 Water temperature - not higher than 40°C (hot water deforms plastic).
• 🧼 Cleaning agent - only neutral (for example, dishwashing agent).
• 🌀 Drying – naturally, away from direct sunlight (at least 12 hours).
• ❌ It is forbidden to use brushes with hard bristles, bleachers, dry in the microwave.

HEPA-filter

• 🚫 Don't wash! HEPA-filters are made of a special fiber that is destroyed by contact with water.
• 🌬️ Cleaning – only dry, with a vacuum cleaner (at minimum power) or a soft brush.
• 🔄 Replacement – every 6-12 months (depending on the intensity of use).

Common mistakes in filter care:

1. correct installation of all elements (especially sealing rubber bands).

2. Clean air channels – sometimes debris gets clogged in hoses or connecting tubes.

3. condition of brushes and turbines - worn parts also reduce performance.-->

When it’s time to change the filter: signs and timing

Even with regular cleaning, the filters wear out over time, and here are signs that it's time to replace them:

• 💨 Lower suction power – vacuum cleaner collects garbage worse, even if the container is empty.
• 🤢 Unpleasant smell - indicates the accumulation of bacteria in the filter (especially important for the patient). HEPA).
• 🔊 Increased noise – clogged filter makes the engine run at power limit.
• 🌫️ Dust at the exit - if dust blows out of the vacuum cleaner, HEPA-filter has lost its leakage.
• ⏳ Expired life – even if the filter looks clean, its effectiveness decreases after 6-12 months.

Recommended replacement times for different types of filters:

⚠️ Note: In vacuum cleaners with self-cleaning function (e.g. DreameBot) X30) Filters wear out faster because of heavy use, and check their condition every 3-4 months, even if they appear clean on the outside.

💡

Replacement HEPA-Even if the vacuum cleaner works “normally”, the worn filter passes the dust particles and allergens back into the air, negating all the benefits of cleaning.

FAQ: Frequent questions about filters in Xiaomi vacuum cleaners