How to Clean Xiaomi Vertical Vacuum Cleaner Properly: A Complete Guide with Expert Tips

Xiaomi’s vertical vacuum cleaners have gained popularity for their compactness, power and usability. However, even the most advanced appliances require regular maintenance to maintain performance and avoid breakdowns. Many users face the problem of reduced suction, unpleasant smell or overheating – all of which are often associated with improper or untimely cleaning.

In this article, we will discuss how to properly service the vertical vacuum cleaner Xiaomi (models Mi Handheld Vacuum, Dreame). V9/V10/V11/V12, Deebot and others, to make it last longer, to learn which parts to clean weekly and which to clean once a month, how to fix blockages without damaging machinery, and what errors lead to premature wear and tear. HEPA, brushes and turbo nozzles, which are most often a source of problems.

If your vacuum cleaner is getting worse at sucking in dust, making extraneous sounds, or discharging quickly, don't rush it to the service. In 90% of cases, it's enough to completely disassemble and thoroughly clean all the components, including hidden channels, and we'll show you how to do it yourself without risking breaking the device.

1.Preparation for cleaning: what will be needed and safety measures

Before you start dismantling the vacuum cleaner, prepare the necessary tools and workplace.

• 🧹 Soft brush (for example, tooth or makeup brush) – to clean hard-to-reach places.
• 🧴 Soap solution (warm water) + dishware) - for washing filters and containers.
• 🧻 Microfibre wipe or lilaless fabric - for wiping the body.
• 🔧 Cross screwdriver (for some models) - if you need to remove protective covers.
• 💨 Canister with compressed air (optional) - for blowing ventilation holes.

Important: before cleaning, fully discharge and remove the battery (if possible in your model). If the battery is not removable, make sure that the vacuum cleaner is off and not connected to charging, this will prevent short circuits when moisture enters.

⚠️ Warning: Never use aggressive detergents (e.g. bleach or acetone) to clean filters, which destroy filter material and may cause a chemical reaction the next time you use the vacuum cleaner.

If your Xiaomi vacuum cleaner is equipped with a smart display (like in Dreame models) V11/V12), Before disassembling, take a picture of the current settings. After assembly, you may need to reset errors through the menu - for example, the code E01 (filter clogging) or E02 (motor-problem).

2. Disassembly of the vacuum cleaner: step-by-step instructions for popular models

Xiaomi vertical vacuum cleaners may be designed differently depending on the model, but the general disassembly principle is similar. Below is a universal instruction that is suitable for most devices (Mi Handheld Vacuum, Dreame). V9/V10/V11, Deebot T30 etc.).

Step 1: Removal of the dust collector

• 🔄 Press the release button of the container (usually located at the bottom of the handle).
• 🗑️ Remove the container and empty it over the trash can. Don't knock on it - it can damage the sealing gums.
• 🧼 Wash the container with warm water and soap, paying special attention to the cyclone filter (plastic spiral inside).

Step 2: Extract filters

Most Xiaomi models are installed 2-3 filter:

1. Pre-filter (net in front of the engine) - usually located behind the dust collector.
2. HEPA-filter (thin cleaning) - located in the upper part of the vacuum cleaner, under the cover.
3. Motor protection filter (in some models) – requires removal of the rear panel.

To get hold of it. HEPA-the filter, press the lock (usually indicated by the arrow) and pull the filter upwards. Be careful, it can be secured with additional latches.

Make sure the filter is completely dry (minimum 24 hours)|

Do not use hot water (maximum 30)°C)|

Do not press the filter - only wet with a napkin|

Check the integrity of the sealing gum|-->

Step 3: Removing nozzles and brushes

The turbobrush and other attachments are attached to the body with latches or a rotary mechanism, to remove them:

1. Press the release button of the nozzle (usually red or orange).
2. Pull the nozzle on yourself, holding the vacuum cleaner by the handle.
3. To clean the brush, use scissors to remove the coiled hair, or a special tool (comes with some models).

3. Cleaning filters: how to extend their service life

Filters are the lungs of your vacuum cleaner, and not only does the cleaning quality depend on it, but the life of the engine depends on it, and a clogged filter causes the engine to run at the power limit, which leads to overheating and shortened service life.

Let’s take a look at how to clean each type of filter in Xiaomi vacuum cleaners correctly:

Pay special attention HEPA-The filter. In the Dreame models. V11 And it's newer, it's often equipped with an antibacterial coating that breaks down when you wash it too often, and if the filter is hard or has changed color, it's time to replace it:

• 🛒 Dreame V9/V10 — DM-FILT-001
• 🛒 Mi Handheld Vacuum — XMSXJ02FM
• 🛒 Deebot T30 — ECOVACS-HEPA-03

⚠️ Attention: After washing HEPA-Never dry it with a hair dryer or a battery, the high temperature will deform the micropores, and the filter will lose its properties, and the best way to do this is to leave it in a well-ventilated room on the floor. 24-48 hours.

💡

If the vacuum cleaner still doesn't suck well after cleaning the filters, check the sealing gums on the container and the lids, and over time they lose elasticity and let air through, reducing the discharge, and grease them with silicone lubrication or replace them.

4.Closure removal: where to look and how to clean

One of the most common problems with Xiaomi vertical vacuum cleaners is clogs in the ducts, which are caused by large debris (hair, thread, pieces of paper) and can completely block the device.

• 🔊 The vacuum cleaner hums, but it doesn't suck in.
• 🔥 Heats the body quickly.
• 📉 Suction power drops sharply.
• 🚨 There's an error on the display. E01 or E03.

Where to look for blockages:

1. vacuum cleaner pipe - especially at the bending point (if the model has a flexible hose).
2. Connecting connections between the container and the motor.
3. Inlet of the engine (requires partial disassembly).
4. Brush or turbo nozzle - hair is wound on the shaft.

How to clean up the blockage:

1. Disconnect all removable parts (pipe, nozzles, container).
2. Use a flexible cable (such as from the bicycle brake) or wire to push through the trash.
3. For hard-to-reach places, a vacuum cleaner in blowing mode will suit (if there is such a function).
4. Blow the ducts with a can of compressed air.

If the clog is in front of the engine, it's going to require partial disassembly. V11 And the Mi Handheld Vacuum is needed:

1. Remove the back cover (unscrew) 2-3 screw).
2. Carefully remove the motor unit (do not pull the wires!).
3. Clean the engine inlet with a cotton swab or soft brush.

5.Brushing and nozzles: remove hair and dirt

The turbobrush is one of the most loaded parts of the vacuum cleaner, and it collects not only dust, but also hair, thread, animal hair, which winds on the shaft and blocks rotation, and if the brush becomes less spinning or creaking, it's time to clean it.

Instructions for cleaning the turbobrush:

1. Remove the brush from the vacuum cleaner by pressing the lock button.
2. Turn it over and unscrew the screws (if any) or remove the protective cover.
3. With scissors or a special tool (combined with some models) remove the wound hair.
4. Wipe the shaft and bearings with a napkin soaked in alcohol (for disinfection).
5. Lubricate the bearings with silicone lubrication (1 drop for each).

For models with a soft roller (for example, Dreame) V12) Cleaning should be done after each cleaning:

• 🧼 Remove the roller from the brush by pressing the side latches.
• 🧺 Wash it under running water with soap.
• 🔄 Make sure that the brushes are not deformed.

If the brush is still not rotating well, check:

• 🔋 Battery charge (at low charge, the brush motor works weaker).
• 🔧 The state of the drive belt (in some models it can stretch).
• 📱 Power settings in the Mi Home app (if the vacuum cleaner supports connection).

💡

Not only does cleaning your brush regularly improve cleaning quality, it also prevents engine overload, and wound hair increases resistance, which causes the vacuum cleaner to consume more energy and discharge faster.

6. Battery care: how to extend the operating time

Lithium-ion batteries in Xiaomi vacuum cleaners lose capacity over time, but proper care can slow this process.

• 🔋 Do not keep the vacuum cleaner completely discharged or charged on 100%. Optimal level — 40-60%.
• 🔌 Do not leave the device on charge for more than 24 hours.
• 🌡️ Avoid overheating (do not use a vacuum cleaner above 35)°C).
• 🔄 Once every 3 months perform battery calibration: completely discharge and charge the vacuum cleaner.

If the vacuum cleaner began to discharge quickly, check:

1. Contact status on the battery and charger, oxidation or dirt can disrupt the charge.
2. Battery temperature during operation. If the case is very hot, it's a sign of wear and tear.
3. Power settings. Max mode consumes charge in 2-3 times faster than Eco.

In the Dreame models V11 You can check the battery status through the Mi Home app:

1. Open the app and select your vacuum cleaner.
2. Go to Settings. → Battery status.
3. If the battery is below 60%, it is time to replace it.

⚠️ Warning: If the vacuum cleaner suddenly shuts down while running, it may be a sign of a faulty charge controller, not the battery itself.

Disinfection and elimination of odors

Over time, the vacuum cleaner may develop unpleasant odors caused by the accumulation of bacteria, mold or residues of organic debris. 1-2 month.

Disinfection methods:

• 🧼 Washing with vinegar: Add 1 tbsp. vinegar to 1 liter of water and rinse the container and filters. Vinegar kills bacteria and neutralizes odors.
• 🍋 Citric acid: 1 spoonful 0.5 Soak the removable parts on the water. 10-15 minutes, then rinse.
• 🌿 Essential oils: apply 1-2 drops of tea tree oil or eucalyptus on the filter before assembly.
• 💨 Ozonator (if any): treat the container and brushes for 10 minutes.

If the smell is still there after cleaning, check:

• 🗑️ Dust collector – sometimes the garbage gets stuck in the corners and starts to rot.
• 🔥 Motor compartment – overheating can cause the smell of burning.
• 🧽 Brushes – they may remain particles of food or wool.

For odor prevention:

• 🗓️ Empty the container after each cleaning.
• ☀️ Dry all removable parts in the open air.
• 🚫 Do not suck in moist garbage (teas, coffee grounds).

💡

If the smell appears after cleaning the wet garbage, disassemble the vacuum cleaner and dry all the parts for at least 48 hours. Use a fan or blow warm air (no more than 40).°C).

8 Frequent cleaning errors and how to avoid them

Many users make mistakes when servicing Xiaomi vacuum cleaners that lead to breakdowns or shortened lifespan.

Another common mistake is using non-original filters, which may not be the same size or material as cheap ones, leading to:

• 🔊 Increased noise during operation.
• 📉 Reduced suction power.
• 🚨 Emergence of errors E01 or E02.

If you are looking to save money on original parts, at least check out:

• 📏 Coincidence of size and shape of the filter.
• 🔍 Availability of a certificate HEPA H12/H13.
• 📄 Compatible with your model (see article).

💡

Regular maintenance of the Xiaomi vacuum cleaner not only prolongs its life, but also retains a warranty. Many service centers refuse repairs if the breakdown is caused by non-compliance with care rules (for example, clogged due to accumulation of hair).

FAQ: Answers to Frequent Questions