Many users, choosing a new smartphone, ask the question: Xiaomi Redmi Note 10 how much Hz supports its display? This parameter is critical for comfortable use of the interface, scrolling through the news feed and, of course, for games. In today’s realities, it is the frequency of updating the picture that determines how smoothly your gadget will work in everyday tasks.
The Redmi Note 10 has been a hit with the introduction of AMOLED technology in the budget segment. However, frame rates are often the subject of controversy, as they directly affect the perception of system speed. In the basic configuration, the device is able to produce images at a frequency of up to 90 Hertz, which is the standard for the middle class.
It’s important to understand the difference between a standard 60Hz and a higher frequency. If you move from an older smartphone, the difference will be noticeable immediately after the first turn on. Let’s take a look at the technicalities, how you customize it, and the impact of this option on the autonomy of your Xiaomi.
Technical characteristics of the display Redmi Note 10
The screen in the Xiaomi Redmi Note 10 smartphone is made using Super AMOLED technology. This means that each pixel is individually illuminated, which gives a deep black color and high contrast. The matrix resolution is 2400×1080 pixels, and the pixel density is 394 ppi, which provides excellent image clarity.
In terms of refresh rate, the manufacturer has set a limit of 90 Hz. This means that the image on the screen is updated ninety times per second. For comparison, standard office monitors and older smartphones operate at 60 Hz. The difference of 30 additional updates per second creates an increased smoothness effect.
It should be noted that the maximum frequency of 90 Hz is available only in standard mode. In some energy-saving profiles, the system can forcefully reduce this figure to 60 Hz to save battery power. The peak brightness of the screen reaches 1100 nits, which allows you to use the smartphone comfortably even in bright sunlight.
💡
To check the actual refresh rate at any time, you can use the built-in engineering test or third-party applications like Screen Test, which show the current FPS in real time.
DCI-P3 technology provides a wide color gamut that makes photos and videos look rich, but it is the hertzovka that affects how quickly the touchscreen responds and how smoothly animations move from one state to another, which is especially important when you quickly scrolle through web pages with a lot of text and graphics.
How to turn 90Hz on and configure in MIUI
By default, MIUI may not be using the maximum frequency all the time, trying to balance performance and power consumption. To force 90Hz mode, you need to go to the display settings, which ensures that the interface always runs at the highest available speed.
Go to your device's settings menu. Find the section that controls the screen settings and select the refresh rate option. Here you will be offered two options: standard (60 Hz) and preferred (90 Hz), the second option activates maximum smoothness.
☑️ High frequency activation
After selecting the mode, the Preferred Changes take effect instantly. Reboot is not required. However, it is worth considering that some heavy applications or games may not support high frame rates, and in these the system will automatically switch to 60 Hz for stability.
⚠️ Attention: Forced 90Hz turn on increases the GPU load, which can lead to faster battery discharge during the day.
Performance comparison: 60 Hz vs 90 Hz
The visual difference between the two screen modes is obvious even to the naked eye. At 60Hz, objects seem a little intermittent, especially with fast swipes. 90Hz mode eliminates this twitching, making animations more natural and pleasing to the eye.
In games, the situation depends on the optimization of a particular application. If the game supports 90 FPS (frames per second), then on the Redmi Note 10 you will get a significant advantage in shooters and racing simulators. The picture will be updated more often, which reduces input lag and allows you to react faster to the actions of the enemy.
| Parameter | 60 Hz mode | 90 Hz mode |
|---|---|---|
| Smoothness of the interface | Standard. | Tall. |
| Energy consumption | Low. | Medium/High |
| Heating the hull | Minimum | Notable under load |
| Game responses | Improved. |
However, if you use your smartphone primarily for reading books, listening to music or calling, the difference may not be as critical. In such scenarios, 60 Hz is enough for a comfortable operation, and switching to the frequency will not give a tangible increase in convenience, but reduce battery life.
The Impact of Renewal Frequency on Autonomy
Increasing the number of screen updates per second requires additional computing resources from the processor and graphics accelerator, which inevitably leads to increased power consumption. The Redmi Note 10 has a 5,000 mAh battery, which allows you to compensate for the increased energy consumption.
With active use of 90 Hz mode (social networks, browser, games), the device’s life can be reduced by about 10-15% compared to 60 Hz. If it is critical for you that the smartphone lives two days without recharging, it makes sense to switch to a standard frequency.
MIUI has adaptive update algorithms. Even when 90Hz is on, static scenes (like when you're watching a photo or reading text without scrolling) can dynamically decrease the frequency, which helps save charge without sacrificing smoothness in moments of action.
Secrets of battery saving
For users who spend a lot of time navigating or watching video offline, the difference in autonomy will be minimal, since video content is most often 24, 30 or 60 frames per second.
Gaming opportunities and FPS support
Xiaomi Redmi Note 10 is powered by a Snapdragon 678 processor, a mid-range chipset that can pull most popular mobile games at high settings, but 90 FPS gaming support depends not only on the screen, but also on developers optimizing the app itself.
In games like PUBG Mobile or Call of Duty Mobile, if you have the right settings in the graphics menu, the device can deliver a stable 90 frames per second. This gives a tangible advantage in competitivo! in matches, and the movements of the characters and the aiming become clearer.
In heavy open-world games like Genshin Impact, the processor may not be able to handle high frame rates at maximum graphics settings, and in such cases, the system will automatically lower the FPS to 30 or 60 to avoid overheating and trottling (decreased performance due to temperature).
⚠️ Warning: Long-term play at maximum settings with 90Hz enabled can cause strong body heating.It is recommended to remove the case during long gaming sessions.
For amateur eSportsmen, having 90Hz on a budget device is a great bonus. Even if you're not a professional, a smooth picture reduces eye fatigue during long-term gaming. The brain exerts less strain by processing visual information, allowing you to stay focused longer.