How to find out the model of your phone Xiaomi: all the ways

You bought Xiaomi out of your hands, found an old phone in your drawer, or just forgot what model you have? It can be difficult to determine the exact modification of a smartphone from this brand – especially when you consider that the same lineup (for example, the Redmi Note 11) can have dozens of variations: Note 11 Pro+, Note 11S, Note 11T 5G, etc. A model error can be expensive: from incompatible firmware to an inappropriate case or accessory.

In this article, we’ve compiled all the possible ways to learn Xiaomi’s model, from the obvious (look at the box) to the hidden (special engineering codes). Each method is illustrated with screenshots and detailed instructions so you’re guaranteed to find the answer. And if the phone doesn’t turn on or crash, we have a solution for that too!

1. The easiest way: look at the box or in the documents

If you still have the original phone packaging, it's a lot easier, and Xiaomi boxes show the model in at least three places:

• 📦 On the front side – usually in large font (for example, Redmi Note 12 Pro) 5G).
• 🏷️ On the side sticker, the serial number is also indicated (S/N) and IMEI.
• 📄 In the documents - a warranty card or check (if you bought in the official store).

Note that some boxes may have the code name of the model (e.g., vili for the Redmi Note 10 Pro) and use the match table at the end of the article to decipher it.

⚠️ Note: If the box is from another phone (for example, the seller slipped a package from Redmi 9, and the device itself is Poco) X3), This method will not work. In that case, move on to the following methods.

2. Check the model in the phone settings

If the phone is powered on and running, the most reliable way is to look at the system settings. The instructions are relevant for all Xiaomi smartphones on MIUI (including Redmi, Poco and Black Shark):

1. Open the Settings app (cog icon).
2. Scroll down and select About Phone.
3. Click on the device model or model name.

Here you'll see the full name, like M2101K7AG (this is Redmi Note 10 Pro) or 2201116PG (Xiaomi 12 Pro). To decrypt the code, use the table below.

On some firmware, the path may be slightly different:

Settings → System → About the device → Model

Or for Poco:

Settings → About the phone → Information about the device → Model

Check if it's hidden in "Advanced"

Update MIUI to the latest version

Try an alternative method (see Section 3)

Reset the settings to factory (extreme case)-->

3.Using engineering codes (USSD-request)

If access to settings is limited (for example, a phone is locked with a pattern lock), you can recognize the model using secret codes. These commands work for all Xiaomi, regardless of the version of MIUI.

Open the Phone app and enter one of the codes:

• 🔢 ##4636## – opens the Testing menu, where the “Device Information” section will contain the “Model” line.
• 📱 ##225## – will show the build calendar (for example, 20220315), which can be used to determine the approximate year of release.
• 🔍 ##4636## (without stars) – an alternative for some models.

Important: on phones with two SIM-If you put in only one card, you can use a command with both cards. SIM.

If nothing happens after entering the code, check:

• 📶 Network connection (codes may not work in aircraft mode).
• 🔄 Correct input (stars and grilles must be in place).
• 📱 Version MIUI (On very old firmware, codes may not be supported).

4. IMEI model definition

IMEI (International Mobile Equipment Identity is your phone's unique identifier, and you can not only use it to identify the model, but also to check if the device is blacklisted (stolen/lost). IMEI:

• 📞 Dial *#06# – a 15-digit number (or two numbers if the phone is two-symbol) will appear on the screen).
• 📄 Look at the sticker under the battery (if the back cover is removable) or on the SIM-tray.
• 🖥️ In settings: About the phone → General information → IMEI.

When you have an IMEI, go to one of the services to check:

• IMEI.info – will show the model, year of release and specifications.
• SNDeeP will even identify rare modifications (e.g. Xiaomi for the Chinese market).

⚠️ Attention: If during the inspection IMEI The service shows a model that does not match the appearance of the phone (for example, the phone is not designed for the same model). IMEI It's Redmi. 9A, And the case says Poco. M3), You probably have a fake or a phone after deep flashing, and then you don't want to install official updates, because it could lead to a "brick).

The full database of Xiaomi code names can be found on the XiaomiUI website (section "Device Codename List").

💡

If you’re planning to sell a phone, be sure to check the IMEI on the SNDeeP website – some models (such as Xiaomi for India) may not support Russian 4G networks.

5. How to know the model if the phone is not turned on

If your smartphone is broken, does not respond to charging, or does not show signs of life at all, there are several ways to determine the model:

• 🔋 Look at the battery – many Xiaomi models (especially the Redmi 4-9 series) have a model on the battery (for example, the model is indicated on the battery, BM47 For the Redmi Note 7).
• 🛠️ Remove the back cover – there is often a sticker with the serial number and model code (e.g., the back cover) underneath, M1901F7G for Redmi 7).
• 🔌 Use a charger – some models (e.g. Poco) X3) When connected to the network, a logo with a name is shown, even if the screen is broken.

If the phone is turned on but the screen is not working:

1. Connect it to your computer via USB.
2. Install the Coolmuster Android Assistant (there is a free version).
3. In the Device Information section, the program will show the model.

⚠️ Note: If you're taking a phone apart to test a model, be careful with plumes — on Xiaomi, they're often attached with fragile latches. For example, the Redmi Note 8 Pro has a battery plume that can easily be ripped off when it's opened carelessly.

Determination of the model by external features

If you don't have a box, the phone doesn't turn on, and you can't check the IMEI, you have visual inspection, and Xiaomi has a few key details that you can use to define the lineup.

• 📸 Camera Location: Redmi Note 10-12 - Vertical block of 3-4 cameras. X3–X5 — big-bump POCO. Xiaomi 11-13 – a huge square module (13 Ultra – with the inscription Leica).
• 🔍 Logo: Inscription POCO — The Mi logo is old models (until 2021). Just Xiaomi without consoles - flagship series (12T, 13 Lite, etc.).
• 🔋 Charging connector: Micro-USB – models up to 2019 (Redmi 7, Mi) A2). USB-C — All models from 2020.

For an accurate definition, take a picture of the phone at the back and front, then compare it to the bases:

• GSMArena (Filter by Brand and Year)
• Xiaomi Device (catalogue with photos of all models).

💡

If the back is marked "Designed by Xiaomi", it is guaranteed to be the original device, and fakes usually have typos or fuzzy font.

7. Checking through a computer (ADB and Fastboot)

For advanced users, there's a way to know the model through the command line, which works even if the phone is locked, but requires USB debugging enabled.

Instructions:

1. Connect your phone to your PC via USB.
2. Install. ADB-Drivers (or use Universal Drivers) ADB Driver).
3. Open the command line (Win + R → cmd) and type in: adb shell getprop ro.product.model
4. If you are using Fastboot, use: fastboot getvar product

In response, you will receive a model code (e.g., M2007J3SC for the Redmi Note 9 Pro).

⚠️ Note: If the adb device command is not displayed in the list, then debugging is done. USB In this case, it can only be turned on by unlocking the device (through resetting or unlocking the bootloader).

FAQ: Frequent questions about Xiaomi model definition