Xiaomi Reaper V2: Complete guide to connecting to a smartphone and computer

Xiaomi Reaper V2 — It's a low latency, Bluetooth 5.2-enabled gaming mouse that's suitable for both mobile and PC, but many users have problems with the first connection: the device is not detected, the buttons are not working correctly, or the connection is constantly broken. In this article, we will discuss all ways to pair Reaper V2 with different platforms, and also tell you how to avoid common mistakes.

It is important to understand that Reaper V2 Supports three modes: Bluetooth (for smartphones and tablets), 2.4 GHz (via USB-adapter) and wired USB. The choice of method depends on your device and tasks. For example, for games on Android, you should use Bluetooth, and for PCs, 2.4 GHz for minimal latency.

1. Connecting Xiaomi Reaper V2 Android-smartphone

Mouse-to-Android phone pairing (including Xiaomi, Redmi models, POCO) It's happening through Bluetooth. LE. This is a universal method, but it requires some pre-tuning:

1. Turn on the Reaper. V2, Holding the power button for 3 seconds until the indicator starts flashing blue.
2. On your smartphone, open Settings → Bluetooth and activate device search.
3. Find it in the list. MI Reaper V2 (Xiaomi BT Mouse and tap for connection.
4. Confirm the pairing if you receive a request for access permission.

Once the connection is successful, the mouse will be displayed in the Connected Devices section. V2 Not appearing on the list, try it:

• 🔄 Reboot the mouse (hold the power button for 10 seconds).
• 📱 Update the firmware of the smartphone (older versions of Android may not have drivers for Bluetooth 5.2).
• 🔌 Connect the mouse to another device (such as a PC) to check its performance.

💡

If the cursor moves in jerks, turn off the “Adaptive Brightness” option in the Android settings – it can conflict with Bluetooth devices.

For games (such as Call of Duty Mobile or PUBG) It is recommended to enable mouse/keyboard mode in the game settings. In some cases, you may need to install additional software, such as Octopus or GameSir, to emulate the keyboard.

2. Connection to iPhone or iPad

Despite the fact that Xiaomi Reaper V2 It's not certified for iOS, and it can be connected to an iPhone or iPad via Bluetooth, but the functionality will be limited:

• ✅ The cursor and main buttons (left/right) are running).
• ❌ No additional buttons are supported (DPI, side-key).
• ❌ There is no way to adjust sensitivity through iOS.

Instructions for connection:

1. Activate Reaper. V2 (blue indicator should flash).
2. On the iPhone, go to Settings → Bluetooth.
3. In the list of other devices find MI Reaper V2 and tap for the connection.

If the mouse is not determined, try resetting its settings: hold the left one. + 5 seconds before the light flashes red.

3. Connection to PC (Windows) 10/11)

There are three options for connecting Reaper to your computer. V2:

1. Bluetooth is universal, but with a delay ~8-12 ms.
2. 2.4 GHz - minimum delay (~1 ms requires USB-kit-adapter.
3. Wired USB — without delay, but restricts the freedom of movement.

Let us consider each method in detail.

3.1 Connection via Bluetooth

The algorithm is similar to connecting to a smartphone:

1. Turn on the mouse (blue indicator).
2. On PC, open the settings → Devices → Bluetooth.
3. Click Add Add the device → Bluetooth and select MI Reaper V2.

If the mouse is not displayed, update the Bluetooth drivers via Device Manager or install them from the official website of the laptop manufacturer/motherboard.

Connection to 2.4 GHz

This method provides minimal latency, which is critical for gaming.

1. Connect. USB-adapter (nano receiver) from the PC kit.
2. Put the mouse in 2.4 GHz mode by holding the button DPI 3 seconds (indicator flashes green).
3. Wait for the automatic connection (usually takes 5-10 seconds).

If the mouse doesn't work:

• 🔌 Try another one. USB-port USB 2.0, as 3.0 can cause interference).
• 🖱️ Reboot the mouse (hold the power button for 10 seconds).
• 💻 Reinstall the drivers for USB-Adapter via Device Manager.

Other Bluetooth devices disabled|USB-Adapter is directly connected (without hubs)|Mouse charged (indicator lights green)|Bluetooth drivers updated-->

Connection wired

The most reliable way, but it deprives the mouse of the main advantage of wireless, suitable for testing or if other methods do not work:

1. Connect your mouse to the PC through USB-C cable (included in the package).
2. Wait for the driver to install (usually automatically).

If the mouse is not identified, check:

• 🔌 Correction of the cable (try another one).
• 🖱️ Cleanliness USB-mouse port (dust or dirt may interfere with contact).

4. button settings and DPI

Xiaomi Reaper V2 Supports 5 levels DPI (400 to 3200) and programmable buttons:

Hardware buttons

Without additional software, you can:

• 🔄 switch over DPI button under the wheel (cyclical: 400) → 800 → 1600 → 3200 → 400).
• 🖱️ Assign macros to side buttons (hold the button) + press the desired key on the keyboard).

4.2. Software configuration (Xiaomi Gaming Center)

For full control, download the official Xiaomi Gaming Center software (available for Windows):

1. Connect your mouse to your PC (by any means).
2. Install Xiaomi Gaming Center from the official website.
3. Open the program and select Reaper. V2 device-list.
4. Set up: 🎯 DPI (up to 3200 in 100 increments). 🖱️ Assignment of buttons (including macros). 🔋 Backlighting (if supported by your version of the mouse).

If Xiaomi Gaming Center can't see the mouse:

• 🔄 Reboot the software and mouse.
• 💻 Launch the program on behalf of the administrator.
• 🔌 Connect the mouse over the wire (for initial setup).

5. Resolving common problems

Even after a successful connection, users face common errors, and we'll look at the most common ones and how to solve them.

If neither of these methods worked, try connecting your mouse to another device. If the problem persists, contact Xiaomi's service center - the Bluetooth module or controller may be faulty.

💡

Most connectivity problems are solved by resetting the mouse (left hold) + 5 seconds right button or update drivers on PC.

6. Compatibility with other devices

Xiaomi Reaper V2 It officially supports Android, Windows and macOS, but it can be connected to other platforms with restrictions.

6.1 Connection to MacBook

The mouse will work via Bluetooth, but:

• ✅ The cursor and the main buttons are functioning.
• ❌ No support for Xiaomi Gaming Center (setup) DPI hardwarely).
• ❌ Possible delays when scrolling.

Instructions:

1. Turn on the mouse (blue indicator).
2. On MacBook, open System Settings → Bluetooth.
3. Choose. MI Reaper V2 and confirm the conjugation.

6.2. Connection to Linux

In most distributions (Ubuntu, Fedora, Mint), the mouse is automatically detected via Bluetooth. 2.4 GHz may require the installation of drivers:

sudo apt install bluez bluez-tools

If the mouse is not working, check the system message log:

dmesg | grep -i bluetooth

Connection to Smart TV

Some TVs on Android TV (For example, Xiaomi Mi TV Sony Bravia is also supported by Reaper. V2 via Bluetooth, though:

• ✅ The cursor will work on the menu TV.
• ❌ There may be delays in games (due to hardware limitations) TV).

To connect:

1. On the remote. TV press Settings. → Devices → Bluetooth.
2. Choose. MI Reaper V2 list.

💡

On Linux and macOS, the mouse functionality is limited – there is no official software to configure. DPI and button.

7.Comparison with other Xiaomi gaming mice

Reaper V2 — Xiaomi's not the only gaming mouse, but it's the other models:

Xiaomi Reaper V2 It stands out among its peers for Bluetooth 5.2 support and low weight (95 g), making it one of the best for mobile gaming. DPI (Mi Gaming Mouse with 7200 DPI).

FAQ: Frequent questions

If your question is not covered in the article, check the official documentation of Xiaomi or contact us for support through the website mi.com.