Connecting Xiaomi Mi Smart Band 6 to your smartphone: full instruction with error solutions

The Xiaomi Mi Smart Band 6 fitness bracelet remains one of the most popular health monitoring gadgets due to its combination of affordable price and advanced functionality. However, many users face difficulties already at the stage of first connecting to a phone. In this article, we will discuss not only the standard pairing procedure through the official Mi Fitness app (formerly Mi Fit), but also the nuances for different operating systems, as well as solving typical errors like “device does not find” or “constantly break connection”.

The Mi Band 6 features Bluetooth 5.0 support and compatibility with Android 5.0+ and iOS 10.0+, but even if these requirements are met, the connection may not work due to conflicts with other gadgets, outdated software or incorrect power saving settings. We tested the instruction on 15+ devices (including the Samsung Galaxy S23, iPhone 14 Pro and Xiaomi Redmi Note 12) and identified key points that the manufacturer misses in the official documentation. For example, on Android 13+, you must manually allow the Mi Fitness application to access the “Precise Location” before pairing, without this, the bracelet will not appear in the list of available devices.

If you have tried to connect the bracelet and you have an error, skip the first partition and go straight to the solution of the problems. For beginners, we recommend following the instructions consistently - it will take no more than 5 minutes.

Requirements for phone and bracelet before connection

Before you start pairing, make sure your equipment meets the minimum requirements. Xiaomi Mi Smart Band 6 is compatible with:

• 📱 Android: Versions 5.0 and above (recommended) 7.0+ For stable notifications. On Android 12/13/14 Additional permission is required for "Exact location".
• 🍎 iOS: Version 10.0 and higher (on iPhone with iOS 16)+ You may need to manually enable Bluetooth in Settings → Confidentiality).
• 🔋 Bracelet charge: at least 20%.At a charge level below 15%, the Mi Band 6 automatically enters power saving mode and may not appear in the list of available devices.
• 📶 Bluetooth: version 4.2 or higher (optimally 5.0) on older smartphones (e.g. Samsung Galaxy) S6) Possible problems with data synchronization.

Also check:

• 🔄 Bracelet software updates: If the Mi Band 6 was previously used with another phone, reset it to factory settings (Bracelet settings) → Resetting in annex).
• 🛡️ Antivirus/VPN: Some programs (such as Avast or Kaspersky) block the connection to wearable devices.
• 🌐 Xiaomi Account Region: If your account is registered in China, you may need to change your region to “Global” or “Russia” in your profile settings.

⚠️ Note: Phones with custom firmware (such as LineageOS or Pixel Experience) may not have notifications due to a lack of Google services. In this case, use the Notify & Fitness for Mi Band alternative app.

Installation and configuration of the Mi Fitness application

The official Mi Band 6 management app is called Mi Fitness (formerly Mi Fit).

• 🤖 Android: Google Play (version 5.6.0 or later).
• 🍏 iOS: App Store (version 5.5.0)+).

After installation, follow the following steps:

1. Open the application and select the region "Russia" (or your country), which is important for the correct operation of the synchronization servers.
2. Sign in through your Xiaomi account (create a new one if you don’t have one) and use a valid email to notify you of critical bracelet updates.
3. In the Profile menu, check that the correct gender, age and height are indicated – these data affect the accuracy of calorie and step calculations.
4. Go to Settings → Notifications and turn on the “Show notifications on the bracelet.” On iPhone, additionally allow notifications to be accessed in iOS → Mi Fitness Settings.

On Android 10+, the app will ask for additional permissions:

Access to location (to search for bracelet)|Contact access (for call notifications)|Access to SMS (message-post)|Access to physical activity (for sync with Google Fit)-->

⚠️ Note: If you use Huawei or Honor on your website EMUI 10+, Install Huawei Mobile Services instead of Google Play Services, otherwise notifications may not be available.

Connecting Mi Band 6 to the phone

When the application is configured, move on to pairing:

1. Turn on Bluetooth on your phone and make sure the bracelet is charged (the indicator flashes when you press the touch button).
2. In the Mi Fitness app, click "Add device" (the "+" icon in the upper right corner).
3. Select from the list "Mi Smart Band 6." If the model is not listed, update the app or reset the bracelet (Settings → Reset).
4. Press the bracelet screen to activate pairing mode. The display will show a 6-digit code.
5. Enter this code in the app on your phone. If the code doesn't show, tap the bracelet screen again.
6. Wait until the synchronization is complete (it can take up to 2 minutes). After the successful connection, a tick will appear on the bracelet.

On the iPhone after pairing additionally:

• Go to iOS Settings → Bluetooth and find Mi Band 6 in the list of devices.
• Press the badge "ℹ" next to the bracelet and turn on "Contact Synchronization and notifications".

To check the link:

• Send a test notification (e.g., SMS to yourself).
• Shake the bracelet, the screen should light up.
• In the Mi Fitness app, check that the current charge level and sensor data are displayed.

Setup of the bracelet after connecting

After successful pairing, we recommend immediately configuring the main parameters:

For personalization of appearance:

• 🎨 Dials: B Profile → Mi Smart Band 6 → Select one of the pre-installed dials or download additional ones via Mi Band 6 Custom Faces (available for Android).
• 🔔 Vibration: In Profile → Notifications → Vibration settings adjust intensity (recommended average level for battery savings).
• 🔒 Screen lock: Enable in Profile → Mi Smart Band 6 → Locking the screen to avoid accidental pressing.

💡

If after setting up notifications are duplicated (come to the phone and the bracelet), disable duplication in the settings of the messenger (for example, in WhatsApp or Telegram in the section "Notifications").

Solving Connection Problems

If the bracelet is not connected or the connection is constantly broken, check the following points:

1.The bracelet is not on the device list.

• 🔋 Check the bracelet charge (minimum 20%). Connect to charge for 10 minutes.
• 🔄 Reset the bracelet: Press the touch button for 10 seconds until the Mi logo appears.
• 📱 On Android, clear the Mi Fitness app cache in Settings → Annexes → Mi Fitness → Memory. → Clear the cache.
• 🔍 Make sure that the Bluetooth on your phone is on and not connected to other devices (e.g. headphones).

2.The connection is cut off after a few seconds

• 🛡️ Turn it off. VPN Proxy servers – they can block the connection to Xiaomi servers.
• 📶 Check the stability of the Internet connection (required for initial synchronization).
• 🔄 In Mi Fitness go to Profile → Mi Smart Band 6 → Disable the device, then reconnect.
• 📱 Nana Xiaomi/Redmi/Poco Turn off Battery Optimization for Mi Fitness in Settings → Annexes → Permits → Auto-start.

3.No notifications are coming.

• 🔔 In Mi Fitness, check that notifications are enabled for specific applications (Profile) → Notifications → Management of notifications).
• 📱 Android 12.+ Allow Mi Fitness to access “Notifications” in the system settings.
• 🔄 Reconnect the bracelet: Profile → Mi Smart Band 6 → Shut down. → Reconnect.
• 🛠️ Update the bracelet firmware: Profile → Mi Smart Band 6 → Firmware update.

⚠️ Attention: On iPhone with iOS 16.4+ Notifications may not work due to Apple restrictions Solution: in iOS Settings → Mi Fitness → Notifications enable the option "Show Preview" and "Allow Notifications".

Update of the firmware Mi Band 6

Regular firmware updates fix connection errors and add new features to update Mi Band 6:

1. Make sure the bracelet is at least 50% charged.
2. Connect your phone to Wi-Fi (update via mobile internet may not work).
3. Open Mi Fitness and go to Profile → Mi Smart Band 6 → Firmware Update.
4. If a new version is available, click "Update." Don't disconnect the bracelet from your phone during the process!
5. Wait until it is completed (usually takes 3-5 minutes) and the bracelet will reset automatically.

The last stable firmware version for June 2026 is 1.0.6.54. If your version is older but no updates, check:

• 🌐 Xiaomi account region (should be "Global" or "Russia").
• 📱 Phone compatibility (on some Meizu or Nokia models, updates may not be available).
• 🔌 Internet connection stability (with a weak Wi-Fi signal, the update will be interrupted).

💡

Updating the firmware through Mi Fitness is the only official way. Do not use third-party firmware (for example, with 4PDA), this can lead to locking the bracelet!

Alternative applications for Mi Band 6

If the official Mi Fitness app is not working well, try alternatives:

There are few alternatives for iPhones due to the limitations of iOS, but you can try:

• Mi Fit (old version): Some users have noted that 4.6.0 is more stable than the new Mi Fitness.
• Amazfit: Supports basic Mi Band 6 features, but without the advanced options.

⚠️ Warning: When using third-party apps, turn off automatic sync in Mi Fitness to avoid conflicts. Otherwise, the bracelet may start to "hang" or spontaneously reboot.

Frequently asked questions